Gas Monitoring System
Get Price Quote
No Scope for user error These Compact, self contained and intrinsically safe designed instrument housed in a weather proof high impact plastic case are powered with a replaceable 4X1.2V Dc battery. On switching 'ON', the instrument goes thorough its complete self integrity check, and displays factory set Warn and Alarm values before indicating 'Ready' for monitoring While in Operation, the instrument monitors the work place continuously giving the latest update concentration of designated Gas through diffusion sampling. Suction sampling is possible with an optional manual or battery operated pump and adaptor. The poison resistant Pellister or long life, integrally mounted electrochemical Sensors with inbuilt cross interference filters are gas specific. Optionally the sensors can be mounted on an extension cable for monitoring inaccessible locations before entry. The instruments emits an audible beep every 15 sees that provides confidence to the user that he is well protected. Audio, Visual also Warn and Alarms protect him from hazardous situations.
Smoke Detector Camera
Get Price Quote
Our organization is a one-stop stop and the best destination for acquiring superiority guaranteed Smoke Detector Camera. We have hired expert warehousing personnel who keep a stringent check on the entire range of stored lot ensuring zero damage to the products till the final dispatch to the clients.
Best Deals from Leak Detection Instrument
Non Ferrous Metal Detector
Get Price Quote
In order to meet the huge market demands, we are involved in offering best quality of Non Ferrous Metal Detector. This Non Ferrous Metal Detector is extensively used to detect both ferrous and non-ferrous metals and in many other suitable applications. These products are available in the market in various sizes and specifications.
Vertical Metal Detectors
Get Price Quote
Designed for Integration with Vertical Packing Solutions Throat and Super Throat vertical metal detectors are designed for integration with Vertical Form, Fill and Seal (VFFS) equipment to inspect free-falling products in food processing and packaging applications. These vertical metal detectors are particularly suitable for snack food and confectionery processing where metallized film packaging is used. Inspection of metal contaminants within the product flow takes place immediately before the product enters the bag, overcoming any limitations created by the wrapping material - and ensuring the highest levels of sensitivity is achieved.
Deep Search Metal Detector
Get Price Quote
Flame and Gas Detector
Get Price Quote
Flame and Gas Detection systems with/without SIL certified controlling & PLC conforming IEC 61508. These systems are also supplied wireless communication using HART/ ISA 100/ GSM wireless. SIL 2 certified Hybrid Sensors SIL 3 certified Controllers Point IR Gas Detectorss Open Path IR Gas Detectors Catalytic Detectors Electrochemical Detectors Metal Oxide Semiconductor Detectors Flame Detectors Photo Acoustic Detectors Ultrasonic Gas Leak Detectors
Gas Monitoring System
Get Price Quote
Flame and Gas Detection systems withwithout SIL certified controlling & PLC conforming IEC 61508.These systems are also supplied wireless communication using HART ISA 100 GSM wireless.Metal Oxide Semiconductor Detectors.
Metal Detectors
Get Price Quote
The company is a highly acclaimed Supplier of Metal Detectors. The Metal Detectors, offered by the company, can be availed in a wide range that includes Door Metal Detectors, Black Hawk Metal Detectors, Hand Held Metal Detectors, Phantom Metal Detectors, Baggage Metal Detectors, Stealth Metal Detectors and Bag Metal Detectors. The company offers the Best Metal Detectors at the best prices on a timely basis.
Door Frame Metal Detector
45,000 Per each
1 Piece (MOQ)
Door Frame Metal Detector
Get Price Quote
Urea 46% Fertilizer, Agricultural Stretch Film, Mulch Stretch Film
Portable Oxygen Indicator (Model: OIP-02/I)
Get Price Quote
1 Piece (MOQ)
This portable indicator is a convenient and handy instrument for field applications where a quick, easy and accurate measurement of oxygen is required.
Leak Detector
Get Price Quote
Microprocessor control Advanced digital signal processing Tricolor visual LED display and audible signal for progressive leak size indication Seven levels of sensitivity Tactile keypad controls Real-time SF6 sensitivity adjustment Battery test function Battery voltage indication True mechanical pumping provides positive airflow through sensing tip Mute feature included Cordless and portable Comfortable one hand operation One year warranty
Portable Gas Detector
70,000 - 80,000 Per Piece
2 Piece(s) (MOQ)
gas detection system
Get Price Quote
The gas detection controller GMA200continues with the tradition of the company under consideration of innovative technology and trend-setting flexibility. It is designed for commercial and industrial applications for the measurement of combustible and toxic gases as well as for the measurement of oxygen. The compact construction of the GMA200-MW4provides a cost-efficient solution for safe gas monitoring of industrial facilities.Parallel Measurement and flexible applicationUp to four analog and 16 digital transmitters can be connected to GMA200-MW4 and monitored simultaneously.Via the configuration software the measurement range, the measurement designation, the type of transmitter and the type of gas can be set individually as well as three alarm thresholds can be programmed for every connected single transmitter.The microprocessor of the GMA200-MW4 evaluates all receiving signals and activates alarm and relays. In doing so one single gas detection controller GMA200-MW4 can master different gas detection tasks.Integrated RelaysPermanent increasing demands on safety measures require complex gas detection systems and redundant protective measures to protect from gas hazards.Therefore the GMA200-MW4 has six internal relays. For the implementation of safety measures and alarm, four relays can be programmed freely so that in case of alarm the safety measures can be triggered automatically. The programming grants wide-ranged and flexible possibilities like allocation of one or more measurement point s to relay,single alarm per measurement point,configuration of collective alarm and group alarm, error report and voting function. For each, safety related error report and maintenance, one further relay is available.Graphic displayThe clear conception of the controllerGMA200-MW4 allows the rapid recognition of hazardous situations. Current measurement values are shown continuous on the LCD- graphic display.At Alarm a red back light is active.Technical dataMeasuring gases: combustible and toxic gases and vapours, for all GfG transmittersDisplay and control elements: 2,2"-LCD graphic display; 5 button keyboard (left, right, up,down, OK); 13 LEDs for Alarms, operation and Relay statusEnvironmental conditions: for storage:-25..+60°C | 0..99%r.F. (recommended 0...+30°C)for operation: -20..+55°C | 0..99%r.F.Power supply:Operating voltage: 100-240V AC 50-60Hz or/and 24V DC (20-30V DC valid)Power consumption: max.7W (without Transmitter) max.25W (with Transmitter)Fuse: F1=T 500mA (for GMA200-MW4) F2=M 1A (for Transmitter)Transmitter connection:Power supply: 24V DC ±3% with built in power supplyunit, otherwise 20-30VDC (see above) 4x 150mA respectively Itotal=0,6A atany other subdivisionRS485 outputs:TRM-Bus1+2: RS485; Half-Duplex; max. 38400 Baud (only for GMA200-MW4 relay modules)GMA-Bus: RS485; Half-Duplex; galvanically isolated; max. 230400 Baud (for GMA200-MW4 relays modules, control center, PC, SPS or Gateway)Relay Outputs:Contactors: Six Relays with one open contact eachContact current capacity:3A/250V AC or 3A/30V DCAnalog outputs: 2 x analog output4-20mA (burden max.560Ω)free allocatableAlarm acknowledgement inputs: 2 x Reset, free allocatableData logger (optional): 2GB microSD memory card with FAT (FAT16) formattingUSB terminal: Mini USB jack for configuration of the device via PCConnection cable:Cable entries: max. 9 units M16x1,5 (for cable cross section 4,5-10mm)Housing:Protection: IP65Material: PlasticsWeight: ca. 890gDimensions: 209 x 180 x 64mm (W x H x D)Approvals/Testings:Electromagnetic compability: DIN EN 50270:2006Electrical Safety: DIN EN 61010:2010 Additional Information: Item Code: GMA200 Pay Mode Terms: T/T (Bank Transfer),Other Port of Dispatch: Mumbai Packaging Details: One Sensor Per Box
gas detection system
Get Price Quote
Hips Sheets, Polypropylene Sheets, R-PET Sheets, a-pet sheets, R Pet Sheet
Beam Smoke Detector
Get Price Quote
We are offering beam smoke detector. The fireray⮠50r/100r series of reflective infrared optical beam smoke detectors are comprised of a single unit incorporating an infrared transmitter and receiver. The signal is reflected by a prism and analysed for smoke presence. The system is designed to be mounted so that the beam will project between 0.3 and 0.6 metres below and parallel to the ceiling. Lateral detection may be up to 7.5 metres either side of the beam. Applications the fireray⮠50r/100r series of reflective infrared optical beam smoke detectors provide economical and effective protection of large, open plan spaces with high ceilings, particularly if access to �point type� smoke detectors presents practical difficulties. key benefits single compact housing area coverage 50 metre or 100 metre model available 12-24 vdc operation low current consumption robust construction conforms to: bs5839 part 5 and en54 part 12, ul and vds
Altraz Tablets
Get Price Quote
Altraz Tablets
Get Price Quote
Plastic Raw Material, recycled plastic pellets, hm granules, Hd Granules
Metal Detectors
Get Price Quote
We are offering metal detectors.
Dfmd- Door Frame Metal Detector
Get Price Quote
1 Piece(s) (MOQ)
Detects ferrous and non ferrous Metals. Detects ferrous and non-ferrous metal concealed in carbon. Continuous Measurement. LCD Bar graph Facility to display the volume of the metal carried through the detector. Metal Volume displayed on the Bar-graph (16 levels) User programmable sensitivity levels up to 8 levels. Self balancing against any change in ambient temperature, humidity, proximity of metal around. Highly reliable.(Very Low MTBF) WALK and STOP display to regulate the traffic flow. Instant recovery on detection. In-built IR sensors (Infrared sensors) to avoid false metal detection. 6 Digit IN/OUT and NET Count Display on LCD. Metal Detection Threshold Setting through Key Pad. Programmable Audio tones as per Metal level. Password protected KEY-PAD. PC connectivity through RS-232 Serial port(OPTIONAL)
Ultraviolet Flame Detectors
Get Price Quote
1 Piece (MOQ)
Tablet Metal Detector
Get Price Quote
Tablet Metal Detector, meeting the pharmaceutical industry’s requirements for sensitivity, stability and sanitation. This Pharma Metal Detector is designed for the detection and removal of minute pieces of ferrous, nonferrous and stainless steel contaminations. Such particles sometimes enter the product stream from deteriorating processing equipment components such as worn sieve wires or splintered dies. Its compact design accommodates many space-restricted areas within tablet and encapsulation rooms. Metal Detector provides 100% in-line inspection of tablets and capsules at the outlet of the press and screens for ferrous, non-ferrous and stainless steel contaminants. It has many features to enhance quality control measurements without interfering with smooth high-speed tablet manufacturing. This also allows easy integration with dedusters and collection drums. The construction of this special Stand saves space into the production room and reduces the retention areas. Cross contamination from production changes is prevented by its clean design and easily removable throughput chute, reject gate and cover. The scanning capacity is 10,000 tablets per minute and the metal detection head is fully adjustable for the height and  angle to ensure the best possible speed and detection accuracy. The Metal Detector chute cab be quickly and easily dismantled for routing cleaning and product changeover. Conforms to the hygiene requirements of the pharmaceutical industry this system can be combined with all high performance Tablet compression machine and dedusting systems. Flexible operating height, angle and frame with lockable casters allow for easy integration to any production facility. The complete unit takes up minimum system length. Features: Automatic Balance Principle Ferrous / Non-Ferrous Detection & Rejection. Reject Confirmation and Indication For Irregularities. Toughness to Vibration And Noise. Digital Signal Processor. Rugged Mechanical Construction. Automatic Parameter Retention. Improved and Compact Search Coil. Date and Time Recording for Routing QC Checks. Timer with Adjustable Delay and Duration for Reject Device Control. All Sensitivity Checks, Settings and Routine QC Checks are recorded. Stable Operation on Mineralized or Conductive Products. LED bar Graph to Display the Status of Coil.
metal detector gate
28,500 - 65,000 Per One
1 Piece (MOQ)
Metal Detector With Charger
4,500 Per Piece
1 Piece (MOQ)
Photoionization Detectors
Get Price Quote
Hydrogen Gas Leak Detector
Get Price Quote
CLD20 Combustible Leak Detector
Get Price Quote
Quickly locate leaks of combustible gases with the Model CLD20 Combustible Leak Detector. Unit provides accurate detection of Methane, Butane, Ammonia, Ethylene Oxide, Alcohols, Industrial Solvents and other combustible or toxic gases. Adjustable tick rate accelerates as the sensor tip approaches a leak and can be re-zeroed to pinpoint the exact location of the leak. The Model CLD20 offers visual LED indication of leak level and automatically recalibrates when turned off and on. Flexible gooseneck and small sensor head allows use in tight, difficult to reach areas.
Fire Alarm Smoke Detector System
Get Price Quote
ammonia detector
Get Price Quote
Metal Detectors
Get Price Quote
This is one of the most vital security requirements at Malls, Amusement Parks, Hospitals, Airports, Hotels, Corporate offices and other large commercial establishments. Integrated Gate Security Systems not only detect and prevent the entry of anti social elements, they also regulate the flow or movement of people and vehicles at entry and exit points including other access points within the facility. Autocop offers a wide range of Gate Security Systems that comprise of Under Vehicle Scanning System, Baggage Scanners, Door Frame Metal Detectors (DFMD), Explosive Detectosr, Hand Held Metal Detectors (HHMD), Turnstiles, Tubestiles and Boom Barriers. These systems also have value added features like giving the foot count of people̢۪s inflow and outflow from a premise. Our Partners in Gate Security Systems include Hyundai Telecom, Stratech, Autoclear, Eastimage and Vision Pacific among others. Click Here To View Product List