Magnetic Stirrer Bath Dealers in Vasai, Mumbai

• Working Space: 25 x 12.5 x 12.5

This is a double walled serological bath with outer and inner wall made of stainless steel. The gap between the walls is filled with glasswool to minimize loss of temperature. A thermostat, at any point from 50C, controls the temperature automatically above room temperature to 600C with an accuracy of + 0.50C and operates on single phase AC current. A built-in pilot lamp is also provided indicate the working of thermostat. Kahn racks to hold 40 tubes, are available at extra cost. The racks are made of stainless steel or brass.

• Material: Stainless Steel
• Brand: HMG India
• Finishing Type: GI Power
• Driven Type: Electric
• Automation Grade: Automatic
• Frequency (Hz): 50 Hz
• Voltage Hz: 220 V

"ML" series of Magnetic Strirrers with stainless steel top housing are most compact models. Permanent Magnet DC (PMDC) motor gives high torque even at lower speeds and maintains speed stability despite viscosity or volume changes.

• Country of Origin: Made in India
• Type: electric
• Color: white
• size: standard
• applicable: Magnetic Stirrer Bath

Complying with international standards, constant temperature water bath is widely acclaimed in the national and international markets. Constant temperature water bath offered by us is recognized for its effectual functioning, consistent performance and minimal maintenance. Consequently, we are one of the key constant temperature water bath manufacturers, suppliers and exporters from india. specifications double walled constructioninner s. Steelouter crca dully epoxy powder coated finishesmotorized stirrer mounted on one side of water bath for maintaining uniform temp within the bathgap filled with glass wool insulationtemp. Range ambient +5oc to 100ocambient + 5oc to 90o caccuracy ± 0.1oc± 1o c for thermostat & ± 0.5oc for controllertemp. Controlelectronic digital temp. Controller cum indicator with sensorthermostatheating is by immersion type special water heater, a booster heater is provided for initial boostingdeluxe modelinner chamber thick s. Steel dully argon weldedouter chamber is matt / mirror polished s. Steel applications research laboratoriesagriculture institutesbio-chemical industriesmedical institutions internal dimension 30 x 25 x 20 cms35 x 30 x 25 cms45 x 35 x 30 cms optional glass viewing window at extracirculator pump for circulation of liquid » specifications sizerating k.w.30 x 22.5 x17.5 cm145 x 30 x 17.5 cm1.5 optional digital temp. Controller cum indicator with pt 100 sensor pyramid lid for size note : doubled walled, inner chamber ss 304 grade & outer ms powder coated finish / ss with glass wool insulation & concentric rings. deluxe modelinner chamber made of thick gauge ss prime sheet, dully argon welded and polished from all sides and corners are rounder, which eliminates any dust deposition.temp. Rangeambient + 5o c to 90o ctemp. Controlthermostatdigitalmicro. Pid controllertemp. Control accuracy± 1oc± 0.5oc± 0.2 oc or better sizehole 3"diarating14 x 10 x 4"61 kw16 x 12 x 4"121.5 kw optional digital temp. Controller cum indicator with pt 100 sensor electrical stirrer note : doubled walled, inner chamber ss 304 grade & outer ms powder coated finish / ss with glass wool insulation & concentric rings. Top lid with holes of 75 mm dia. sizecap. Ltrsrating8" dia. X 6" ht.11 kw10" dia. X 6" ht.31 kw13" dia. X 6" ht.1.5 kw14" dia x 6" ht.1.5 kw note : made of stainless steel provided with immersion type of heater with concentric rings. constructiondouble walled, inner working chamber made from thick gauge s. Steel dully argon welded on all sides, outer chamber of ms powder coated finish, unit is fitted with either electrical stirrer or circulatory pump, gap filled with glass wool/puf insulation.coolinghermetically sealed compressor & system mounted at top/bottom.temp. Rangeas specified against each model resolution 0.1ocuniformitytemp. Maintain uniform with mechanical stirrer or internal circulatory pump cum stirrer *optional external circulation.accuracy±1oc ( 0.5oc with special imported controller @ rs.12,500.00 extra)power230 v, ac, 50 hz, mainscontrolmicroprocessor based controller, 0.1oc resolutions temperaturebath capchamber dimensionsbath openingrange(ltr)l x w x din cms. 0 to 50oc1233 x 25 x 1725 x 20-20 to 50oc1233 x 25 x 1725 x 20-30 to 50oc1233 x 25 x 1725 x 200 to 50oc1533 x 25 x 2025 x 20-20 to 50oc1533 x 25 x 2025 x 20-30 to 50oc1533 x 25 x 2025 x 200 to 50oc2538 x 30 x 2530 x 25-20 to 50oc2538 x 30 x 2530 x 25-30 to 0oc2538 x 30 x 2530 x 25 optional microprocessor based p.i.d. Controller (i/o above)for higher temp. Up to 100oc

TECSONIC Plasma Thawing Bath is specially designed to thaw Frozen Plasma at +37.0°C. Inner chamber made of stainless steel(304), and outer body of MS duly powder coated With built in heavy duty industrial pump to circulate the water throughout the chamber to get maximum accuracy. The Micro Controlled temperature controller controls the tempera.

• Type: Magnetic Stirrer
• Application: Conveyors
• Weight: 10-20kg
• Voltage: 110V
• Power: 250W
• Power Source: Electric
• Warranty: 1year
• Brand Name: Micronvac

Circulating Water Bath, Water Bath Thermostatic

Apparatus, u v cabinet, Oil Bath, Lab Equipments, Heaters

Magnet, Permanent Magnet Motor, industrial magnet

Plasma Thawing Baths, Automatic Donor Chairs, Vortex Mixers

Magnet, Alnico Magnet, Rare Earth Magnet