Manifold Valves Dealers in Nagdevi, Mumbai (20 products available)

The AVLOK Pipe to Pipe 3-Valve Manifold is a general purpose design for connection system impulse lines and transmitters. This manifold consists of two block Valves and an equalizer valve.Connection are 1/2" Female NPT on 2-1/8" (54mm_ centres safety, an bonnet lock pin is standard. SPECIFICATION  Connection : 1/2" Female NPT to 1/2" Female NPT.  One-piece, high strength body construction for safety no welding used.  316 stainless steel construction for superior corrosion resistance.  Bonnet lock pin prevents accidental valve disassembly.  2-1/8" (54mm) Port centerline dimension for proper alignment.  100% pressure tested for shut-off and at all seals.  Manifolds feature at 4:1 safety factor.

• Material: Alloy Steel
• Weight: 10-15kg, 15-20kg
• Feature: Good Quality
• Size: 0-5inch, 10-15inch
• Application: Air Use
• Connection: Socket Weld Ends

We have gained industry experience in offering the finest range of Valve Manifolds to our clients. Being one of the trusted suppliers and exporters of Valve Manifolds from Mumbai, Maharashtra, India, the offered manifolds are highly appreciated in the market, and we process it using approved raw materials. Before supplying to the clients, the Valve Manifolds are quality-tested on assorted standards of quality, and we source it from authentic vendors in the market.   Details : Our clients can avail from us Valve Manifolds that are designed under the expert supervision of our professionals. These are ideal to handle most corrosive fluids and are available in different models and sizes at market leading prices. Apart from this, we check all the products on various parameters to ensure flawlessness Sizes - upto 12 Types  -Socket Weld (Forged) - 45 Deg & 90 Deg Elbow, Equal Tee, Unequal Tee, Eccentric & Concentric Reducer, Nipple, Coupling, Crosses, Caps,Weldolets, Sockolets, Threadolets Grade- Stainless steel, Carbon Steel, Alloy Steel Hast Alloy, Titanium, Monel, Inconel, Nickel, etc Duplex Steel - UNS 31803, UNS32205, UNS 32750, UNS 32760 Specification - ASTM, AISI, ASME, DIN, UNS etc

• Model: 2 Valve
• MOC: AISI SS316 / AISI SS304 / Exotic Material
• Temp Lmiit: 250°C
• Pressure Limit: 10000 psi
• No. of Valves: 2
• Design: R Type

2 valve manifolds are designed for connecting system impulse lines and transmitters. These manifolds are rugged in construction to withstagh pressures and temperatures. The manifolds are rated for pressures as high as 6000 PSI at 200°F or 4000 PSI at 500°F with PTFE Packing. For a Higher Temperatures Grafoil Packing is used     Special Features : Threaded Vertical Port Inlet and Outlets Isolation Bonnet on the sides, Equalizing Bonnet on the front Available in Exotic Materials

We are offering instrument manifold valves. » air header distributer type : bar stock » air header distributer type : pipe

ACE ALLOYS LLP is one of the expertise manufacturer and exporter of Steel Manifold Valves, which is a hydraulic manifold that combines one or more block / isolate valves, and one or more bleed / vent valves, into one component for interface with other components (pressure measurement transmitters, gauges, switches, etc.) of a hydraulic (fluid) system. The purpose of the block and bleed manifold is to isolate or block the flow of fluid in the system so the fluid from upstream of the manifold does not reach other components of the system that are downstream. Then these Stainless Steel Manifold Valves bleedoff or vent the remaining fluid from the system on the downstream side of the manifold. For example, a block and bleed manifold would be used to stop the flow of fluids to some component, then vent the fluid from that component’s side of the manifold, in order to effect some kind of work (maintenance/repair/replacement) on that component. Carbon Steel Manifold Valves is factory tested with nitrogen for leakage at the seat and packing, which is performed with de ionised water at 1.5 times the working pressure; however, other tests like vibration, temperatures, helium and so on are available upon requests. Each and every package is labelled for proper and easy identification. ACE ALLOYS also offer these Alloy Steel Manifold Valves in different sizes, shapes and designs as per customers’ specifications at affordable rates. Manifold Valves Manufacturer & Supplier Best in Class Industrial High Pressure Manifold Valve, 2 Way, 3 Way & 5 Way Manifold Valves Manufacturer & Supplier in India Stainless Steel Manifold Valves, Carbon Steel Manifold Valves, Alloy Steel Manifold Valve, Aluminium Manifold Valves, Brass Manifold Valves Stockist & Dealers ACE ALLOYS LLP is one of the expertise manufacturer and exporter of Steel Manifold Valves, which is a hydraulic manifold that combines one or more block / isolate valves, and one or more bleed / vent valves, into one component for interface with other components (pressure measurement transmitters, gauges, switches, etc.) of a hydraulic (fluid) system. The purpose of the block and bleed manifold is to isolate or block the flow of fluid in the system so the fluid from upstream of the manifold does not reach other components of the system that are downstream. Then these Stainless Steel Manifold Valves bleedoff or vent the remaining fluid from the system on the downstream side of the manifold. For example, a block and bleed manifold would be used to stop the flow of fluids to some component, then vent the fluid from that component’s side of the manifold, in order to effect some kind of work (maintenance/repair/replacement) on that component. Carbon Steel Manifold Valves is factory tested with nitrogen for leakage at the seat and packing, which is performed with de ionised water at 1.5 times the working pressure; however, other tests like vibration, temperatures, helium and so on are available upon requests. Each and every package is labelled for proper and easy identification. ACE ALLOYS also offer these Alloy Steel Manifold Valves in different sizes, shapes and designs as per customers’ specifications at affordable rates. Types of 2 Way, 3 Way & 5 Way Manifold Valves 2 Valve Manifolds Straight Type Tee Type H Type   3 Valve Manifolds Straight Type Tee Type H Type   5 Valve Manifolds Straight Type Tee Type H Type   Monoflange Valves Dimensions of ANSI/ASME B16.10 Manifold Valves 2-Way Manifold Valve ½” NPT Inlet & Outlet & ¼” NPT Vent Plug ½” NPT Inlet & ¼” NPT Vent Plug ½” NPT Inlet & Outlet & ¼” NPT Vent Plug ½” NPT Inlet & ¼” NPT Vent Plug ½” NPT Inlet & Outlet & ¼” Vent Plug 3-Way Manifold Valve ½” NPT Inlet & Outlet ½” NPT Inlet ½” NPT Inlet & Outlet & ¼” NPT Vent Plug 5-Way Manifold Valve ½” NPT Inlet & Outlet & ¼” NPT Vent Plug ½” NPT Inlet & ¼” NPT Vent Plugs ½” NPT Inlet & ¼” NPT Vent Plugs

Super Fasteners Industries is the leading manufacturer, exporter and supplier of manifold valves. Our diligent workers us to offer a quality proven range of manifold valves that find application in various industry segments, these valves are manufactured using premium quality raw materials like ferrous and non-ferrous metals.Further, it offers the simplification of connections between instruments such as pressure gauges, pressure switches, pressure transmitters, indicators and recorders. In addition to this, our manufactured Manifold Valve offers the cut-off and zeroing of instruments. These are highly appreciated by our clients for the features like easy installation, compact and cost effective. These are widely used for applications like instrumentation, process and control systems. Also, these can be availed at reasonable rates. Key features:• Premium quality raw materials used• Ferrous• Non-ferrous metals• Offers the cut-off and zeroing of instruments

2–way Manifold valve. 3-way Manifold valve. 5–way Manifold valve.

We manufacture and supply exceptional quality Manifold Valves that are in wide demand in the market for its various features and properties. The basic details of our Manifold Valves are given below. Designed For : Direct mounting on connecting systemDirect mounting on impulse linesDirect mounting on transmitters Material Of Construction : BrassCarbon SteelMonelStainless Steel Manufacturing process : BarstockForged Testing : Hydrostatic test performed at 1.5 times of required working pressure Pressure : 4000 PSI to 6000 PSI Temperature : 400 F to 200 F

Valve Manifolds are functionally intended to Control, Measure, Isolate, Equalize, Calibrate, Drain, Vent or Differentiate the pressure of liquid & gases. Valve Manifolds are available in 2, 3 & 5 Valve confugrations.

Manifold Valve, cocks fitting, Pipe Fitting, valves fitting

Manifold Valve, Breather Plug, samosa making machine

Instrument Manifold Valves, Tube Fittings, compression tube fitting

Manifold Valves, Air Header, Manifold Valve, Pipe Fitting

Stainless Steel Manifold Valves, Mounted Points, Slewing Bearings

multiple manifold valves, Forged Pipe Fittings, Instrumentation Tube

Manifold Valve, Industrial Valve, union fitting, Tee Fitting, Elbow fitting

three valve manifold, Acrylic Manometer, air lubricator, Air Integral Unit

Manifold Valve, compression tube fitting, Male Connector, eq tee