The tda-4b was specifically designed for use in medium flow systems. Its small size and low cost make it the ideal generator for testing biosafety cabinets or other low flow cleanroom systems. It has a 6 laskin nozzle design, and is capable of testing systems up to 8,100 cfm.
The tda-4b was specifically designed for use in medium flow systems. Its small size and low cost make it the ideal generator for testing biosafety cabinets or other low flow cleanroom systems. It has a 6 laskin nozzle design, and is capable of testing systems up to 8,100 cfm.
The TDA-101P Mask Leakage Tester is an accessory to ATI's TDA-100P Automatic Filter Tester. It has been designed to test the serviceability of any protective mask worldwide. The TDA-101P, in conjunction with the TDA-100P, can be completely set up in minutes. Utilizing solid-state electronic circuitry with simple menu-driven controls, the TDA-101P enables efficient test and analysis of mask results
The TDA-101P Mask Leakage Tester is an accessory to ATI's TDA-100P Automatic Filter Tester. It has been designed to test the serviceability of any protective mask worldwide. The TDA-101P, in conjunction with the TDA-100P, can be completely set up in minutes. Utilizing solid-state electronic circuitry with simple menu-driven controls, the TDA-101P enables efficient test and analysis of mask results
Digital read-out : mass challenge in µg/l and downstream %penetration
Real time indication– fast response
Two stream solenoid switched – may be computer controlled or remotely operated
Switchable DNS makes upstream measurements stable and more accurate
Unrivalled stability – enables measurement to 99.9999% efficiency.
Visual & audible alarm.
Weighs only 9 kg
Scanning Probe: SP9, Simple low cost hand-probe
Scanning Probe: SP20A, Digital hand-probe with alarm LED and articulating head
Digital read-out : mass challenge in µg/l and downstream %penetration
Real time indication– fast response
Two stream solenoid switched – may be computer controlled or remotely operated
Switchable DNS makes upstream measurements stable and more accurate
Unrivalled stability – enables measurement to 99.9999% efficiency.
Visual & audible alarm.
Weighs only 9 kg
Scanning Probe: SP9, Simple low cost hand-probe
Scanning Probe: SP20A, Digital hand-probe with alarm LED and articulating head
The portable PMLT Protective Mask Leakage Tester is a revolutionary piece of equipment designed to test the serviceability of any protective mask worldwide. The PMLT can be completely set up in minutes, and is completely self-contained in a rugged, shippable case. Utilizing solid-state electronic circuitry with simple menu-driven touch pad controls, the PMLT enables efficient data capture and analysis of mask testing results.
The portable PMLT Protective Mask Leakage Tester is a revolutionary piece of equipment designed to test the serviceability of any protective mask worldwide. The PMLT can be completely set up in minutes, and is completely self-contained in a rugged, shippable case. Utilizing solid-state electronic circuitry with simple menu-driven touch pad controls, the PMLT enables efficient data capture and analysis of mask testing results.
The NanoCount 30+ is the world’s first 30 nanometer liquid particle counter. Based on our new state-of-the-art technology and built by Lighthouse, it is backed by international support. The NanoCount 30+ includes a built-in color display for viewing real time data and uses the industry...
The NanoCount 30+ is the world’s first 30 nanometer liquid particle counter. Based on our new state-of-the-art technology and built by Lighthouse, it is backed by international support. The NanoCount 30+ includes a built-in color display for viewing real time data and uses the industry...
The MiniColt 4SP has been designed for air flow testing, visualization tests and particle recovery work. It is a completely portable unit and has the ability to produce anything from a small wisp of artificial smoke to a large plume, on and off power. Pharmaceutical grade smoke chemical, stored in a one-piece aluminium canister is forced under pressure through the precision machined heat exchanger, where it is vaporised. The vapour condenses to form a "smoke" effect with a classleading particle size (an order of magnitude smaller than most "conventional" smoke systems) which means that dense smoke can be achieved for a substantially lower concentration of chemical in the atmosphere.
The MiniColt 4SP has been designed for air flow testing, visualization tests and particle recovery work. It is a completely portable unit and has the ability to produce anything from a small wisp of artificial smoke to a large plume, on and off power. Pharmaceutical grade smoke chemical, stored in a one-piece aluminium canister is forced under pressure through the precision machined heat exchanger, where it is vaporised. The vapour condenses to form a "smoke" effect with a classleading particle size (an order of magnitude smaller than most "conventional" smoke systems) which means that dense smoke can be achieved for a substantially lower concentration of chemical in the atmosphere.
Designed with functionality in mind, the Lighthouse LS-60 Liquid Sampler is an integrated syringe sampler and optical particle counting system with an easy-to-use Windowsâ„¢ based software interface. Following a quality standard of reliability and dependability, Lighthouse Worldwide Solutions developed the LS-60 Liquid Sampler using the...
Designed with functionality in mind, the Lighthouse LS-60 Liquid Sampler is an integrated syringe sampler and optical particle counting system with an easy-to-use Windowsâ„¢ based software interface. Following a quality standard of reliability and dependability, Lighthouse Worldwide Solutions developed the LS-60 Liquid Sampler using the...
The Lighthouse LS-20 Liquid Sampler has an integrated syringe sampler and optical particle counting system. Its easy-to-use Windowsâ„¢ based software interface is designed to meet the international regulatory EP and JP, as well as USP 788, requirements. Following a quality standard of reliability and dependability,...
The Lighthouse LS-20 Liquid Sampler has an integrated syringe sampler and optical particle counting system. Its easy-to-use Windowsâ„¢ based software interface is designed to meet the international regulatory EP and JP, as well as USP 788, requirements. Following a quality standard of reliability and dependability,...
The Apex portable particle counters are the worlds smallest and lightest 1.0 CFM particle counters.
The Apex can store up to 3.000 records of particle count data from up to 4 particle channels and the configurable database can store up to 50 recipes for sampling and reports. The Secure Data Transfer allows all particle count data to be quickly and reliably transferred to a USB flash drive, computer, facility monitoring system or building automation system.
The Apex portable particle counters are the worlds smallest and lightest 1.0 CFM particle counters.
The Apex can store up to 3.000 records of particle count data from up to 4 particle channels and the configurable database can store up to 50 recipes for sampling and reports. The Secure Data Transfer allows all particle count data to be quickly and reliably transferred to a USB flash drive, computer, facility monitoring system or building automation system.
The high boiling range of the smoke chemical used results in an aerosol or smoke of exceptional persistency, so it remains visible for long periods. The resulting smoke has been analysed by independent laboratories to ensure that it is both non-toxic and nonflammable. Canisters re-seal after use, so no wastage occurs and part-used canisters can be utilised later. The artificial smoke from the MiniColt 4 can be ducted using optional ducting adaptors (to suit 25, 50 and 75mm ducting) enabling the smoke to be introduced into a restricted area, duct or fume cupboard very simply.
The high boiling range of the smoke chemical used results in an aerosol or smoke of exceptional persistency, so it remains visible for long periods. The resulting smoke has been analysed by independent laboratories to ensure that it is both non-toxic and nonflammable. Canisters re-seal after use, so no wastage occurs and part-used canisters can be utilised later. The artificial smoke from the MiniColt 4 can be ducted using optional ducting adaptors (to suit 25, 50 and 75mm ducting) enabling the smoke to be introduced into a restricted area, duct or fume cupboard very simply.
The Concept Air Trace is perfect for situations where a small amount of smoke is required for air tracing applications or in remote locations where no power is available. It is capable of producing shorts bursts or a steady stream of smoke, if required, for up to 10 minutes on a full battery or up to 1 hour, with the optional mains adaptor and dummy battery. The unit is compact and very simple to use and operates on a 12vDC sealed battery.
The Concept Air Trace is perfect for situations where a small amount of smoke is required for air tracing applications or in remote locations where no power is available. It is capable of producing shorts bursts or a steady stream of smoke, if required, for up to 10 minutes on a full battery or up to 1 hour, with the optional mains adaptor and dummy battery. The unit is compact and very simple to use and operates on a 12vDC sealed battery.
Reviews & Ratings
Write a Review
Post Free Ad