MEHTA SANGHVI & CO. Marol, Mumbai, Maharashtra

Main base frames are fabricated and stress relieved before machining. There are basically two units, the Drive and Idler - one unit each. The precisely machined (on boring machine) Roller Brackets are bolted on the roller beds. Both the Roller Brackets have to be manually moved as per the job diameter keeping the job center fixed. This model has double ended drive to avoid use of intermediate drive shaft. The fixing holes for the brackets on the bed are precisely factory set.

We are one of the leading firms engaged in providing a wide range of Welding Cables and Cables Kits. These cables offered by us are used for various connection processes in the industry. Made using premium quality wires these cables are provided with a rubber coating for proper insulation. Before dispatch, the final range is stored in our capacious and well-maintained warehousing unit in a safe and efficient manner. Clients can avail, these in various specifications as per their needs.

Sigma Galaxy - simplicity and state-of-the-art technology. Sigma Galaxy is the result of new giant leaps in welding technology. Developed in co-operation with universities and users throughout the world, this high-technology welding machine in a self-explanatory industrial design optimizes itself and allows the welder to focus on good workmanship.

Number Of Flower : Automatic

Certification : CE Certified

Availability : 100-1000kg

Country of Origin : 220 V

Rated Power : 1-3kw

Total Carbohydrate : 1 Year

After-Sales Service Provided : Spare Parts

Feature : Carefully formulated, High performance

The MiniMill 100 is a rugged, fast, portable weld end preparation lathe designed for various tubes and pipes, including stainless steel and other high chromium materials. Our standard machine can be used for pipe sizes of 20 – 74 mm i.d. (0.787” – 2.913”) and comes with a 88 mm cutting head.

Tube expansion system, Our New Model Push & Pull K50-600 Pneumatic Rolling Motor has been specifically engineered to ensure uniform tube to tube sheet expansions, thereby preventing the under and over rolling of tubes. This pneumatic tool features an aluminum body, weighing in at only 10.5 lbs (4.76 Kgs) with an ergonomically correct pushpull Throttle. Automatically Stops Tube expansion at defined settings.

These saw blades and bevel cutters are especially designed for our pipe cutters for highest requirements and longest service life. 4 different ranges of swa blades are available.

The Rapid Heat 35 System has a choice of four programmes Pre-Heat, Bake-Out, P.W.H.T. and Custom. In the programme you can set the target temperature, soak timetemperature, cool down temperature rate deghr, ramp rate deghr, etc. The Rapid 35 controller will then monitor the attached thermocouples to ensure that the heating and cooling rates are not violated during the procedure.

Mini Ostrich is a right-handed lightweight, portable yet robust shape-cutting machine, which can be used on field job as well as in factories. This is simplest and one of the most accurate magnetic tracing systems, which help in maintaining repeatability of the flame cut parts. Mini Ostrich is primarily meant for cutting different shapes such as stars, hexagons, squares, rectangles, circles, triangles etc. It can also cut straight lines up to 2000 mm in length. It can cut plates up to 150-mm thickness. The speed of the machine can be varied with an indexed selector knob. The tracing head can be moved in clockwise or anticlockwise direction by a selector switch. The use of Mini Ostrich is almost unlimited because of the accuracy with which metal templates can be made easily and repeatability of shapes obtained.

After successfully launched the portable cantilever and the portable bench CNC cutting machines, SteelTailor, the world leader in portable CNC machines, has newly released its portable gantry! The portable gantry is named by SteelTailor as Dragon. Its cutting width can reach as wide as 3.5 meters (11 feet). The length can be extended as need. The precision is as good as a traditional gantry machine. SteelTailor Dragon portable gantry machine is designed with care for the users and dealers. The thoughtful design makes it easy to install and to adjust. Users can easily fix everything by following the instruction of the user manual and the demo video. It is not only convenient but also absolutely saving the cost on installation and adjustment!

This latest generation portable beveling machine performs auto feed beveling on steel plates on top, front and bottom edges. The ABM-28 can perform beveling along steel plate’s edge in both travel directions eliminating hard physical work of the operator. Required length of the guide track (rail) can be accomplished to with additional sections of guide tracks.

This latest generation portable beveling machine performs auto feed beveling on steel plates on top, front and bottom edges.The ABM-28 can perform beveling along steel plate’s edge in both travel directions eliminating hard physical work of the operator.Required length of the guide track (rail) can be accomplished to with additional sections of guide tracks.

Plasma cutters - Kjellberg can be integrated with Steeltailor to realize high effective cutting. Kjellberg 's Cutfire50i, Cutfire90i, Cutfire100i Cutfire120i are very good choices.

Availability : 22(kg)

Pipe beveling machine The MiniMill 100 is a rugged, fast, portable weld end preparation lathe designed for various tubes and pipes, including stainless steel and other high chromium materials. Our standard machine can be used for pipe sizes of 20 – 74 mm i.d. (0.787” – 2.913”) and comes with a 88 mm cutting head.

Oxy- 70 is a sturdy yet Portable 0xy Fuel Plates Cutting Machine. It is designed for Clean and Accurate cutting of Mild and Low Alloy Carbon Steel. It is Easy to Operate and is best suited for Straight line, Bevel and Circular Cuttings. Oxy 70 means maximum 70mm thickness capacity, the machine can cut Straight Line cuts upto 1.8 Mtrs length or multiples, can cut Circles from 75mm to 1200mm diameters, Bevels from 0 to 45 degrees. The Machine traverses on an Aluminum Rail for Straight Cutting and cuts circle with a circle cutting attachment. The speed of Oxy- 70 can be set instantly by an indexed speed selector knob .Its forwardoffreverse switch is located just below the speed control knob for easy and quick operation. The speed of the machine can be varied from 80 to 800 mmmin to suit the nature of cutting. The Machine can be supplied with Injector Mix or Nozzle Mix or Victor compatible Torch . The Machine can be supplied with or without Mechanical Clutch. SEC also has models to cut thicker plates like Oxy 150 , Oxy 200 , Oxy 300.

This manually operated portable oxy fuel pipe cutting machine uses a chain and gear drive system. The drive chain is comprised of durable, interlocking links that can easily be added or removed for quick change of pipe diameters. A graduated bevel collar ensures accurate bevel setting. The control valves for fuel, preheat oxygen and cutting oxygen are positioned away from heat yet conveniently placed for easy operator use.

Orbital welding equipment, Plasma cutters - Kjellberg can be integrated with Steeltailor to realize high effective cutting. Kjellberg 's Cutfire50i, Cutfire90i, Cutfire100i Cutfire120i are very good choices.

EWAC Placut 80 D is state of the art digital Plasma Cutting Machine provided with the latest primary switched power electronic and controls. The features are -IGBT Semi conductor Power blocks for reliable performance in Hand and Mechanised cutting. - Stable cutting process because of the line fluctuation compensation. - 100% Duty cycle at maximum current - Higher flexibility through the low weight of only 59 kgs - Easy operation because of. The EWAC Placut 80 D delivers excellent quality properties at high productivity in a wide range of thickness and at various metallic materials including galvanized steel plates.

Ostrich 2000 is a Professional , Tough and Durable Profile Cutting Machine . This non tiring machine has to be foundation mounted and can be used in multiple shifts for large Production Application. A Magnetic Racing Roller which moves around a Tin Sheet Template makes the cutting Torch cut the exact shape with perfect accuracy. Ostrich 2000 can cut Mild Steel and Low Alloy Carbon Steel with Oxy Fuel the Machine can also be used for Plasma Application to cut Stainless Steel and Aluminium. The Machine can cut from 5mm to 250mm Plate thickness with Oxy Fuel and Plasma thickness depends on Power Source. The Machine can cut any complex shapes like Flanges , Stars , Hooks , Elipse , Triangles or even Circles , Squares , Rectangles and even Staright Lines.

The Rapid Heat 35 System has a choice of four programmes Pre-Heat, Bake-Out, P.W.H.T. and Custom. In the programme you can set the target temperature, soak timetemperature, cool down temperaturerate deghr, ramp rate deghr, etc. The Rapid 35 controller will then monitor the attached thermocouples to ensure that the heating and cooling rates are not violated during the procedure.

We have gained expertise in delivering a quality range of Electrode Holders. The offered products are manufactured by our expert professionals using superior quality raw material, which is procured from the most reliable vendors of the market. Available in different specifications, these Electrode Holders are appreciated in the market for their attributes like fine finish, perfect design and compact size. We assure t deliver the entire range at client’s premises within the desired time-frame.