Metal Testing Equipment Dealers in Andheri, Mumbai

(17 products available)
  • Premium
    Conical Mandrel Bend Tester

    Conical Mandrel Bend Tester

    11,000 - 14,000 / Piece

    • MOQ1 Piece(s)
    • Dimesions250 x 150 x 419mm
    • Specimen Thickness0.80mm / 1/32"
    • Max specimen width190mm
    • Conical mandrel1/8 - 1 ½" (3.2 – 38.1 mm)
    • The conical mandrel bend tester is used to determine properties of a coating. Resistance to cracking detachment from its substrate and its elongation during the test. Conical mandrel test is also known as standard method for assessing the flexibility and the adhesion properties of coatings when these are subjected to bending stresses This is accomplished by bending the test material around a conically shaped metal bar. The conical mandrel bending test is a commonly used for testing for painted or coated panels.
    ...more
    www
  • Karat Meter

    Karat Meter

    Get Price Quote

    It distinguishes the real gold and platinum from the fake material efficiently. Also it is useful to measure actual purity than that of marked without harming samples i.e. there are no scratches or stains left behind on the sample. Unlike expensive metal analyzer it does not evaluate the purity of GOLD and PLATINIUM just from outer surface, it is most useful when you want distinguish complete gold or platinum from gold or platinum plated material. User friendly operation yet very fast measurement it will not take more than 15 second to finish one measurement. Higher weighing resolution including 0.001g and 0.01g gives you flexibility of measuring high accuracy in specific gravity and also possibility of measuring purity with lower sample weight. Unlike other low resolution load cell sensor our karat tester are equipped with Magnetic sensor gives you reliable, accurate and repeatable weighing result which intern gives you very accurate purity measurements of precious metal. Result can also be documented if connected with Aczet CPR 02 printer You can also measure specific gravity (density) of any solid material other than precious metal.
    ...more
  • Plating Plant 3 Ltr

    Plating Plant 3 Ltr

    Get Price Quote

    • Power0.3 kw
    • Dimensions27 ” x 16.5 ” x 16 ”
    • Input Voltage220 V, 50/60 Hz
    • Capacity3 ltr
    • Heater3 x 50 watts / 1 bath
    • Output12 V-30 Amp
    • Dimensions of Tank5.5” x 6 ” x 6 ”
    • Planting Plant carries out Plating process on articles using different types of Gold Carats such as 9kt, 12kt, 14kt, 18kt, 22kt, 24kt and also to carry out Rhodium plting. Degreasing, Activation, muliple Rinsing, before Flash and Rhodium tanks all placed according to the order of process and ease of operation and in controlled temperature value. Gold plating is the process in which a fine gold layer is coated over another metal by an electrochemical reaction. During the electrochemical reaction a DC current gold ions from the gold bath solution is adhered on to the negatively charged piece or article. Gold as itself is ductile and malleable. For enhancing the properties of the articles, materials like Silver, Copper and Nickel are introduced and gold plating is done of it to mimic the same appearance of gold. FEATURES:  3 Litres Polypropylene Plating Plant with Degreasing Bath, Activation Bath, Gold Plating bath and Rhodium Plating bath. Timing and Voltage Controller with digital display. Automatic Temperature Controller. SS Anode for degreasing and Gold Plating bath. Multi-metal oxide anode for Rhodium.  Voltage ramp, Automatic Timer and Manual settings.  Convertible Agitation for piece movement inside bath.
    ...more
  • Gold Testing Machine

    Gold Testing Machine

    1,500,000 - 1,700,000 / Bag

    • Working Temperature15-25oC
    • Power220V - 50 Hz
    • Availability33 Kg
    • SoftwareWindows based
    • Precision+ 0.1%
    • Relative humidity<10 - 80 %
    • Measurement area20mm
    • We use premium-packaging materials to safeguard our products from mechanical and environmental conditions. For our patrons, we offer customized packaging solutions as well. We are committed towards providing the world-class lot of products thus, check each and every product on different levels.
    ...more
  • DC TIG Metal Plus Welding Equipments

    DC TIG Metal Plus Welding Equipments

    Get Price Quote

    • Power Capacitance3.9KVA
    • Rated Input Current17.8A
    • acdc tig metal plus welding equipments smooth arc and stable welding performance ideal for welding carbon steel, stainless steel, copper and non-ferrous metal with dc tig function and aluminum, aluminum alloy welding in ac function automatic over-voltage and over-current, protection quick connect torch and gas fittings. High strength case construction for industrial applications.
    ...more
  • Gold Loss Controller

    Gold Loss Controller

    Get Price Quote

    • MOQ1 Piece(s)
    • Brand NameUltra-Shine
    • We are offering gold loss controller, itâ��s an electromagnetic field emitter which emits electromagnetic field of various different frequencies. This field excites the metal particles (platinum, gold, palladium, silver, copper, zinc) present in the atmosphere and forces them to settle down on the ground floor. Thus you can also recover your metal particles which you lose in atmosphere while filling and polishing it. How it is used? just connect the plug in a socket and place the machine in your filling, polishing and buffing department. Now start the normal manufacturing process. key features: * settles down all the precious metallic dust from the atmosphere. Ï� (platinum, gold, palladium, silver, copper, zinc) ï� * helps in reducing refinery work. Ï� * no other consumables required. Ï� * long life of the machine. Ï� * cost effective. Ï� * unlimited technical support at no extra charge. Ï� * no minimum orders. * ï� prompt courteous service.
    ...more
  • METAL DECORATING EQUIPMENTS

    METAL DECORATING EQUIPMENTS

    Get Price Quote

    • modelP-452
    • 1-6 Colour Metal Decorating Press with conventional and U.V. Ink Printing incorporating many advanced features,  Operationally Best and Most Efficient.   Maximum Sheet size : 45” x 38”    Maximum Speed       : 7500 SPH     Gears for Cylinder and Roller Drive are located outside of Main Frame thereby eliminating oil trickle/seatter  on sheets and improved lubrication to increase gear life substantially.   Image starting-point on the sheet can be set with simple mechanism on plate cylinder gear.   One touch Plate Clamping System.   Print Pressure Adjustment with Handwheel.   Alcohol Dampening System   Optional CPC Control System.   Automatic Lubrication System.   Simple operation for Mechanism & Pressure settings.
    ...more
  • Pro Manual Gold Testing Machine

    Pro Manual Gold Testing Machine

    Get Price Quote

    Pro Manual Gold Testing Machine, Pro Automatic Gold Testing Machin
  • Gold Testing Machine

    Gold Testing Machine

    Get Price Quote

    • SoftwareUser friendly, Coating-thickness analysing and operating programs Results and statics data can be stored in data file. There are three seperate modules as follows. 1. Evaluation module for coating thickness and composition analysis. 2. Software m
    • MODELStaRk
    • X-Ray tubeHigh Performing,stable with long life tungsten tube. Spot size approx 0.5x0.5mm to assure minimal beam spread
    • High Voltage50kV, 1.2mA (60Watt) high voltage generator, software controlled.
    • CollimatorSingle Collimator 0.3mmØ (optional sizes : 0.1mm, 0.2mm, 0.5mm, 0.7mm)
    • DetectorProportional Counter, Si-Pin & SDD
    • Colour Video microscopeHigh resolution CCD color camera for optical monitoring of the measurement location with 20X zoom, Electronic cross hair with scale and beam size indication.
    • Sample FocusMotorised moving head z axis
    • Laser PointerLaser emits through the collimator travelling the X-Ray indicating the target spot on the sample very precisely only with colimator >0.3mm
    • Micro Focus X-Ray tubeX-Ray tube with tungsten target, Be window, stability and longer life, spot 85x85µ. Oil insulated air cooled, radiation safe tube shielding. single collimator 0.1mmØ
    • Multi collimatorColliamtor changer, 6 positions molarised, automatic 0.1mmØ / 0.2mmØ /0.3mmØ / 0.5mmØ / 0.05x0.05mm / 0.05x0.25mm
    • Sample stageMotorised programmable X,Y
    • Power SupplyAC 110V or AC 230V, 50-60Hz
    • Power Consumption200VA
    • Usable Sample Area400x420mm
    • Internal Chamber Dimension500 x 489 x 172.5mm (W x D x H)
    • External Dimension500 x 652 x 500mm
    ...more
  • Specimen Mounting Press

    Specimen Mounting Press

    Get Price Quote

    Specimen Mounting Press, CBN Grinding Wheels, Diamond Dressing Tool
  • Gold Testing Machine

    Gold Testing Machine

    1,150,000 / Piece

    • MOQ1 Piece(s)
    • Brand NameMaxsell
    • Availability31kg
    • Total Carbohydrate12 months
    • Accuracy0.01% (Under optimized test conditions with standard samples)
    • Availability31kgs
    • Country of Originchennai
    • Model NumberMX-GT Aurum
    • Power Supply110V to 260V, 50/60Hz
    • After-Sales Service Providedyes
    • DetectorSI Pin Diode Detector / Silicon Drift Diode (SDD) Detector
    • High Voltage4-50 KV - Auto variable type to increase Tube Life
    • ElementsAl (13) to U(92) detection range
    • Testing Time20 - 60 Secs (30-40 Secs for best results)
    • Test Area1
    • XRay tubeTriple Stage Cooling W-Target Xray Tube
    • Power Supply110V to 260V, 50/60Hz
    • Dimension400(L)x660(W)x330(H)
    • Get accuracy of fire assay method detects 20+ elements precisely identifies prohibited elements (powder) iridium, ruthenium, osmium, etc convenient touch screen operation - fast & easy industrial standard touch screen interface with inbuilt laptop. Detailed features: technology: si-pin diode detector tube based detector design: easy sample loading chamber, low profile design for super convenience. Inbuilt touch screen operation makes it easy plug and play usage: simply place sample & click test icon. Bottom to top x-ray, makes it quick & easy sample positioning software: professional software yet simple & comprehensive. Curves to suit wide array of samples composition which provide excellent control on quality of results results: accurate & fast results for jewellery or melt ingot or any form or shape sample can be tested. Get results that can be closest to fire assay safety: 100% safe, each instrument is tested with "inspector usb - radiation alert instrument usa" maintenance: low maintenance ratio and cost effective packages available after warranty reports: get pdf or excel report with complete detail. Customize report software available to suit individual needs suitable for hallmark labs refineries & assaying centers jewellery showrooms & manufacturers testing & tounch centers for application which demands certified analysis system first time in india - maxsell xrf gold tester with hindi language user interface
    ...more
  • Gold Testing Machine

    Gold Testing Machine

    Get Price Quote

    Gold Testing Machine, Spectrometer, Diamond Testing Machin
  • Portable Gold Tester

    Portable Gold Tester

    Get Price Quote

    Portable Gold Teste
  • Gold Testing Machine

    Gold Testing Machine

    Get Price Quote

    Gold Testing Machine, Plating Machine, Precious Metal Analyzer, Wax Injecto
  • Dry Mounting Texturising Press

    Dry Mounting Texturising Press

    Get Price Quote

    Dry Mounting Texturising Press, Mat Master Circle Cutter, Measuring System
  • Metal Finishing Equipment

    Metal Finishing Equipment

    Get Price Quote

    Metal Finishing Equipment, Electroplating Equipment, Anodizing Chemical
  • Gold Purity Testing Machine

    Gold Purity Testing Machine

    Get Price Quote

    Exceptionally fast, easy to use-Just close the lid and push a button, or point and shoot . See results in seconds on a bright, color, touch-screen display.
Filter by Locality
top