Plastic Rods Dealers in Andheri East, Mumbai (23 products available)

We are offering uhmwpe rods.

• Material: ABS
• Color: Pink,CLEAR,BLUE,GREEN
• Size: 24 INCH
• Brand Name: Lemon
• Usage/Application: Bathroom
• Mounted Type: Wall Mounted
• Capacity: Upto 5 Kg

We are offering ptfe moulded rods. Diameter :12.5mm to 400mm(standard) length :300mm(standard) material : virgin ptfe

• Color: As per Customer Requirement
• Brand Name: ASHWIN PLASTIC INDUSTRIES
• manufacture technique: Extrusion

• Diameter: 2.0 mm to 50 mm

POLYPORTM- Porous Plastic Filter Material of Polypropylene, PTFE, HDPE, Cellulose Acetate, and Polystyrene ranges from 5 to 250 microns. Form of rods, hollow pipes, sheets and joined parts of porous with a non-porous plastic and can be moulded as per your drawing and dimension.

We stringently follow the safety packaging guidelines, thus we are flexible enough in delivering the products to the clients. We only use the finest packaging material to evade loss during transit. Our organization has all the essential logistic resources and links to ensure on schedule delivery of order(s).

Oil seals for the shafts are of dynamic type in as much as sealing has to be provided between a rotating shaft and a stationery member. Int he vast majority of cases the internal pressure against which the seal has to work is very low and thus whist a simple lip seal may be adequate its performance depends to a large extent on a suitable unit load being maintained at the seal-shaft interface. The conventional form of Oil seal which is suitable for the majority of applications where the pressure involved is not more than about 5 PSI and the oil (or fluid) to be sealed is clean comprises a moulded elastomeric ring. For the majority of applications where a conventional single lip seal will be suitable, seal selection is based on seven basic points: namely shaft diameter, housing bore diameter and width, shaft speed, working temperature, fluid, pressure differential and service conditions.

POLYPORTM- Porous Plastic Filter Material of Polypropylene, PTFE, HDPE, Cellulose Acetate, and Polystyrene ranges from 5 to 250 microns. Form of rods, hollow pipes, sheets and joined parts of porous with a non-porous plastic and can be moulded as per your drawing and dimension Material: POLYPORTMmakes its porous plastics from many thermo-plastic polymers including: Polypropylene (FGX) Polyethylene (DMF) Polyvinylidene Fluoride (PVF) Ethylene-Vinyl Acetate (EVA) Styrene Acrylo Nitrite (SAN) Polyurethane (PUR) Polytetrafluoroethylene (TFE) Polystyrene (PTR) Cellulose Acetate (CAB) Availability: Diameter from 2.0 mm to 50 mm can be produced. Custom sized for your application - No cutting, no waste Hydrophilic, Hydrophobic and Sealing Type

• Country of Origin: India
• Type: Extruded Ptfe Rod
• Material: PTFE, Virgin PTFE
• Shape: Round
• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm, 5 - 350
• Length: 300mm (standard)
• Outer Diameter: 12.5mm to 400mm (standard)
• Made to Order: Specific Length & Diameter available as per customer`s requirement
• Filler: Glass / Carbon / Graphite / Bronze / Bronze + MOS2

PTFE Rods exhibit astonishing chemical resistance. PTFE is a self-lubricating material that provides a low friction coefficient, and is ideally suited for the manufacture of corrosion-resistant gaskets & seals. PTFE stands for PolyTetraFluoroEthylene. it is a fluorocarbon-based polymer. FEATURES OF PTFE ROD: Easily outperform other engineering plastics by being able to perform continuously at temperatures of -250°C, right up to an +250°C It has an outstanding co-efficient of friction It also has a very good acid and chemical resistance Another feature of PTFE is its ability to set by or due to compression PTFE has excellent electrical resistance PTFE is water repellent and can be used in the manufacture of modern high performing, water repellent and breathable clothing   FEATURES OF PTFE ROD: Easily outperform other engineering plastics by being able to perform continuously at temperatures of -250°C, right up to an +250°C It has an outstanding co-efficient of friction It also has a very good acid and chemical resistance Another feature of PTFE is its ability to set by or due to compression PTFE has excellent electrical resistance PTFE is water repellent and can be used in the manufacture of modern high performing, water repellent and breathable clothing DATA INFORMATION FOR PTFE ROD: PTFE is a synthetic fluoropolymer. Maximum long term working temperature is plus 260°C. Maximum short term working temperature is plus 260°C Melting point is plus 327°C. Co-efficient of friction is 0.08. Density is 2.18g/cm3 ADDITIVES OF PTFE ROD: Although PTFE is an excellent material, PTFE Rod can further be enhanced by adding performance enhancers into the production process such as molybdenum, bronze, graphite etc. This can further expand its suitability for other applications. ADHESIVES FOR PTFE ROD: PTFE is very slippery but there are specialist adhesives produced specifically to bond it either to more PTFE or to bond the PTFE to other materials. This often involves a primer which etches the surface of the PTFE Rod to prepare the initial surface and the adhesive is then applied to complete the bonding process. This is more complicated in terms of having a two part process than other bonding systems but if you require any assistance with this, we recommend you contact an adhesive specialist. POINTS TO REMEMBER ABOUT PTFE ROD: Softness of PTFE Rod – PTFE Rod is softer than other engineering plastics and this may cause damage to the material if gripping or clamping in machine tools such as lathes or milling machine vices. In addition, threading PTFE rod would produce threads of limited strength Thermal Expansion – PTFE has a marginally higher than average thermal expansion rate. This means that components will increase/decrease in size due to temperature fluctuations Bonding – Bonding PTFE rod can be a little more involved than with some other engineering plastics Weight – PTFE is much denser than most other engineering plastics. This means there is an increase of weight over other plastics

Pvc fiberglass sleeving, Fiberglass Chopped Strands, frp pultruded profile

• Material: Polyacetal
• Color: White
• Shape: Round

• Material: Polyacetal
• Shape: Round rod
• Diameter: 6mm - 150mm
• Melting temp: 166 degree c
• Operating temp: 100-140 degree c
• Density: 1.41gm/cm3
• Elongation At Break: 32.00%

We are manufacturer of PTFE Rod also custom PTFE rods like:PTFE moulded rod : 25 mm dia to 500 mm dia length – 300 mm & also available in 500 mm length. PTFE moldedrod are also available in filled grade. 

plastic rods, Plastic Items, tubes, Tube Fittings, Pvc Pipe, Hdpe

oil seals, Auto Spare Parts, Suspension Parts, light parts

Nylon Rods, Polymer, tubes

plastic rods, Bobbins, Precision Component, nut fasteners

oil seals, dust covers, Diaphragms, Bellows, boots, Transmission Mounts

Plastic Welding Rods

fibre reinforced plastics rods, frp pultruded products, Plastic Products

plastic square rods

oil seals, Water Filters, Air Filters, Regulators, Lubricators