S G Gasket & Cooling Tower Co Andheri East, Mumbai, Maharashtra

Cooling Tower Fill Is The Main Heat Transfer Area Available For Heat Transfer From Hot Water To Cold Air. The Splash Fills Disintegrates The Hot Water From The Vertical Direction And It Splits The Water To Pass Through Next Level Of Splash Bars.. Fills Are Normally Made Of Pvc, Wood.

Size : 28 X 28, 35 X35, 65 X 65, or According To Clients Requirement

Material : PVC

Total Carbohydrate : 1 Years

Turbo Splash Modular Splash Fill Assemblies Feature Hinged Panels That Can Be Installed In Both Counter Flow And Cross Flow Cooling Tower Applications. Turbo Splash Was Designed For High Thermal Performance Where Poor Water Quality Does Not Permit The Use Of Film Fills. Each Unit Can Be Accordion-Folded Into A Compact Bundle For Efficient, Cost-Effective Storage And Shipping And Then Unfolded In The Tower For Easy InstallationTemperature : Stand Upto 85 Degree Celsius And Its Non-Clogging

Size : 305*1220mm

Material : PVC

Total Carbohydrate : 1 Years

We S G Gasket & Cooling Tower Co. Manufacturing Cca (Copper Chromate Arsenic) Chemical Treated Timber. These Timber Or Pine Wood Cooling Towers Are Available In Induced Draft Cross Flow & Induced Draft Counter Flow Design. And The Capacity Is 45 M3/Hr. To 5000 M3/Hr In Multi Cells Fan Diameter Varies From 1500 Mm To 10000 Mm. Different Models Have Different Air Travels, Fill Height, Fill Pattern, Fan Diameter, Etc.

Number Of Flower : Single And Double Cross Flow

Sgct Manufactures Screw Shank Nails In Stainless Steel Grade. The Sizes Vary From 1” To 4” In Length & 16’ To 10’ Wire Gauge In Diameter. Sgct Also Manufacture U Nails. The Nails Are Mainly Used For Wooden Cooling Tower To Fix Wire Grids Sgct Also Offers Ss Self Drilling Screws and Tapping With Neoprene Washers In 1” 1 ½” , 2” And 2 ½” Sizes, These Are Used Mainly To Fix Frp Casing And Louvers In Pultruded Frp Cooling Towers.

Size : Available In All Size

Material : Stainless Steel

Sgct Manufactures Screw Shank Nails In Stainless Steel Grade. The Sizes Vary From 1” To 4” In Length & 16’ To 10’ Wire Gauge In Diameter. Sgct Also Manufacture U Nails. The Nails Are Mainly Used For Wooden Cooling Tower To Fix Wire Grids SgctAlso Offers Ss Self Drilling Screws and Tapping With Neoprene Washers In 1” 1 ½” , 2” And 2 ½” Sizes, These Are Used Mainly To Fix Frp Casing And Louvers In Pultruded Frp Cooling Towers.

Material : Stainless Steel

Size : All size Available

We source direct as well as indirect raw materials only from the certified vendors present in the market. Our team of quality experts strictly checks the entire range against varied parameters. We efficiently cater to the varied demands of the clients and offer them personalized packaging options as well. We ensure that the products are packed sternly using quality packaging material to evade loss.

Material : Rubber

Condition : New

Total Carbohydrate : 1 Years

Reinforce Concrete Cement Cooling Towers Designed For Heavy Industrial Applications Such As Power Plants; Petrochemical And Chemicals Plants And Refineries Of Various Kinds. Our Engineering Department Guides The Concrete Construction Process From Beginning To Completion, Ensuring That On-Site Work Meets All Requirements. While Construction Is Taking Place, All Relevant Parts Of The Cooling Tower Are Purchased Or Manufactured And Sent To The Job Site. When The Structure Is Ready, Our Assembly Team Flies To The Job Site To Install And Furnish The Cooling Towers With Fill, Louvers, Fan, Motor Unit, And Fan Stack Until The Cooling Tower Is Operational.Details : Reinforce Concrete Cement Counter Flow & Cross Flow Cooling Towers Longest Service Life In Harsh Environment Erected On Site Pultruded Frp Fills Support

Material : Concrete Cement

Number Of Flower : Counter Flow / Cross Flow

we sgct manufacturing pvc fills optimally designed to achieve (with both edges folded) high surface area for given volume pvc fills are made by continuous forming and offer minimum resistance to airflow, providing more cooling by lower power consumption. they have uniform thickness throughout. durable folded edges provide, strength at critical locations on the fill. the fills are easy to glue at site thus saving on transportation costsdetails : 12 mm flute size 17 mm flute size 19 mm flute size 27mm flute size 32-27 mm flute size and the length, width & height are coming according to client requirement

Number Of Flower : Pvc Fills

Material : Pvc, PVC

Certification : CE Certified, ISO 9001:2008

Application : Air Compressors, D.G. Sets, Plastic Molding Machines, Process Cooling, Fill In The Cooling Tower And Add Water Retention Time

Condition : New

Capacity : 0-500L, 1000-1500L, 500-1000L

Total Carbohydrate : 1year, 1 Years

Temperature : 0-50℃, 50-100℃

Gauge Thickness : 0-5mm

Size : as per requirement

Brand Name : SGCT

Thickness : 0.20-0.025

After-Sales Service Provided : YES

Cooling Type : all type

We design, manufacture and export cooling towers and spares like frp, pultruded frp, timber and rcc.

Induced-Draft Cooling Towers Made Of Frp. The Structure Of Our Pul. Frp Series (support Beams And Columns) Is Made Of Composite Continuous Fiberglass Pultruded Sections That Comply With Cti Std 137 And Conform To Astm E84d With A Flame Spread Rating Of Below 25. Pultruded Frp Cooling Towers Are Positioned Over A Concrete Basin. Just As Our Sgct Series , Sgct Provides Its Customers With Scale Drawings Of The Concrete Cement, Including Locations And Production Drawings Of All Pipe Fittings In 2d Or 3d, The Size Of A Single Cell Ranges From 3m X 3m To 15m X 15m. When The Concrete Basin Is Ready On Site, Sgco Sends Its Assembly Teams To The Job Site, Where One Team Sets The Pultruded Frp Structure, And The Other Furnishes The Cell Once The First Team Has Erected It.Detail : Pultruded Frp Cooling Towers Have Become An Alternative Solution To Traditional Concrete Cooling Towers, Since In Many Cases They Cost Less And Their Erection Time Is Much Shorter Than That Of Cooling Towers Made Entirely Of Concrete. In Addition, Pultruded Frp Towers In Many Cases Offer Superior Corrosion Resistance.Options : Additional Weil Layers To Increase Corrosion Resistance Pultruded Frp Hand Rails, Walkways, And Ladders Low-Noise Fans. Ss 304 Nut Bolt Or Ss 316. Elevated Basin For Optimal Use Of Space. Features : Pultruded Fiberglass Polyester Field-Erected Cooling Towers Heavy-Duty Cooling Towers Designed For Industrial Applications Optimal Thermal Performance Design Highly Resistant To Corrosive Environments

Material : Pultruded And Hand-Rail Frp

Number Of Flower : Counter Flow

Capacity : 2,000,000-20,000,000 Kcal/Hr Per Cell

We Sgct Manufacturing Various Types Of Nozzle As Per Requirement & Base Upon Design, Pressure Required

Material : Polypropylene

Condition : New

Total Carbohydrate : 1 Year

Optic Grid Fills Is A Direct Replacement Splash Fill For Use In Counter Flow Cooling Tower Where Dirty Water Is A Concern .Optic Grid Splash Fills Is Maximizing Number Of Water Drop Lets & Highest Surface Of Water Are Passing Through Air .This Fills Are Made Of Polypropylene,(Pp) It Is Resistant To Attack From Acids, Alkalis, Muddy Water , Ash, Etc.

Material : PVC

Condition : New

Total Carbohydrate : 1 Years

We Sgct Manufacturing The Torque Tupe Or Baseframe Unitized Supports Gives Permanent Alignment Of The Motor, Driveshaft & Gear Reducer. Torque Tube Type And Channel Base Frame Can Be Used For Both Cross Flow And Counter Flow Cooling Towers.Normally The Mechanical Supports/Base Frames Are Made Out Of Hot Dip Galvanized Steel. Stainless Steel Of 304 Or 316 Grade Are Manufactured Upon Request.

Material : Metal

Condition : New

Total Carbohydrate : 1 Year

We Sgct Manufacturing The Gear Box Single & Double Reduction Which Depend Upon The Motor Capacity In Kw(Hp)Single Reduction : One Reduction Ranges From Ratios Of 2:1 To 5.5:1. Power Ranges From 7 Hp (5.2 Kw)  Up To 60 HpDouble Reduction : Double Reduction Gearbox Is The Perfect Choice. Reduction Ratios Range From 7.5:1 To Over 20:1. Power Ratings Start At 60 Hp (45 Kw) And Exceed 500 Hp (375 Kw).

Material : Metal

Condition : New

Total Carbohydrate : 1 Year

We S. G. Gasket & Cooling Tower Co Manufacturing Frp Package Cooling Tower Like Square Counter Flow, Bottle Type & Force Draught With Uniquely Designed, For High Performance Reliability Durability & Trouble Free Operation And It’s Come Segment Which Can Be Easily Maintenance During Operational, This Frp Cooling Tower We Also Design For High Temperature & Temperature Up To 90 Degree Celsius The Capacity Of Cooling Are Coming For 2tr To 4000 Tr.Frp Package Cooling Tower : Square Counter Flow. Bottle Type. Force Draught Type Square Counter Flow. Bottle Type. Force Draught Type.

Total Carbohydrate : 1 Years

Availability : 870kg(net weight)

The Raw Material I.E. Frp And Aluminium Provides The Desired Non-Corrosive Quality To The Fan Blades, Resulting In The Operation Of Fans Even In The Chemical Environment. Frp Is Lightweight Material Which Ensures Low Moment Of Inertia, Minimum Wear & Tear Of Motor, Bearing And Drive System.Detail : The Basic Purpose Of Fan Is To Move A Mass Of Gas Or Vapor At The Desired Velocity. For Achieving This Objective, There Is Slight Increase In The Gas Pressure Across The Fan Impeller. Sgct Manufacture Fans With Fan Blade Choice Of Correct Twist And Of Special Airfoil Sections To Reduce Compressibility Losses.

Size : Small, Medium, Large

Blade Material : Aluminum

SGFCT Louvres Are Made Up Of Asbestos Sheets Or Frp Sheets. It Serves Two Purposes. One Is To Retain Circulating Water Within The Tower, And Other Is To Equally Distribute The Air Flow Into The Fill

Size : Customize

Number Of Flower : Cooling Tower Parts

Material : Pvc, FRP

Certification : MSMED

Application : Machinery Use, COOLING TOWER

Availability : 1-5kg

Packaging Type : AS PER REQUIREMENT

Condition : New

Surface Finishing : Polished

Country of Origin : India

Brand Name : SGCT

Surface Treatment : YES

Dimension : AS PER CLIENT

After-Sales Service Provided : YES

Cooling Type : ANY TYPE

Sgct Fan Cylinders Feature Venture- Shaped Eased Inlets And Closed Blade Tip Clearances. The Fan Stack Does Far More Than Protect Operating Personnel From A Rotating Fan. It Is A Vital Link In The Chain Of Critical Components That Contribute To The Overall Efficiency Of Cooling Tower. When Correctly Designed, Manufactured And Supplied, It Assures The Fan Will Be Capable Of Moving The Maximum Amount Of Air Through Tower At The Minimum Required Horsepower.Detail : For An Optimum Fan Performance, The Fan Stack Must Have Dimensional Stability For A Perfect Fan-Tip Clearance, Proper Smooth Air Intake And At The Exhaust Side A Flare Of 7-8 Deg. The Fan Stacks We Manufacture Are Of 8 Degree Flare Diffuser Type With Elliptical Or Parabolic Air Inlet. Fans Stacks Are Taken Up For Manufacturing After Approval Of Drawings By Client, We Use Best Materials Unsaturated Polyester And Fiber Csm. The Fan Stack Thickness, Dimensional Stability And Weight Per Segment Are Maintained Throughout The Manufacturing Process.

Material : PVC

Condition : New

Fan Deck Provides A Platform For The Support Of The Fan Cylinders And Acts As An Access Way To The Fan And Water Distribution System

Body Material : Metal

Total Carbohydrate : 1 Years

Sgct Drive Shaft Assemblies Are Available In Hdg, Ss 304, & Carbon Composite Fibre Design To Transmit High Torque Rating For Cooling Tower Applications. Drive Shaft Are Single Span & Flexible To Compensate For Any Misalignment. All Drive Shaft Components Are Completely Inter Changeable & Its Design Through Ansi /AGMA 9000- D11

Material : Metal

Total Carbohydrate : 1 Years

The Purpose Of Drift Eliminator Is To Reduce The Drift Loss In The Cooling Tower. Drift Eliminators Normally Kept Next To Fills In The Air Flow Path Thereby Reducing The Drift Loss. Drift Loss Is The Loss Of Entrained Water Through The Hot Air To Atmosphere. Drift Eliminators Normally Made Up Of Pvc. More Number Of Passes Through Drift Eliminator Decreases The Drift Loss But Increases The Pressure Drop Thereby increasing fan Power Consumption.   The Drift Eliminator Coming In : C Type. S Type. Spectra Type And The Drift Loss Are Coming 0.002 To 0.005%

Material : PVC, PP, FRP

Total Carbohydrate : 1 Year

We Sgct Manufacturing All Types Of Distribution System Like Hot Dip Galvinse, Pvc,Frp ,PVC Lateral Pipe & And We Design As Per Water Capacity With Lateral Pipe With This We Offer To Our Client Flow Control Valve.

Material : Metal

Total Carbohydrate : 1 Years

Condition : New

Induced-Draft Cooling Towers Made Of Frp. The Structure Of Our Pul. Frp Series (support Beams And Columns) Is Made Of Composite Continuous Fiberglass Pultruded Sections That Comply With Cti Std 137 And Conform To Astm E84d With A Flame Spread Rating Of Below 25. Pultruded Frp Cooling Towers Are Positioned Over A Concrete Basin. Just As Our Sgct SeriesCrossflow Towers : Low Pumping Head, Thus Lower Operational Cost. Accepts Variations In Water Flow Without Changing The Distribution System. Easy Maintenance Access To Vital Parts. Reduced Drift Loss Due To The Absence Of Water Droplets. Lower In Noise Due To Absence Of Water Noise. Larger Foot Print Of The Tower. Large Air Inlet Surface Makes Icing Difficult To Control. Tendency Of Uneven Air Distribution Through The Infill Due To The Large Inlet Surface. Customise & Tailor Made Counter Or Cross FlowCustomize & Tailor Made Tower Is Design Were We Have Less Space To Design Counter Or Cross Cooling Tower & We Are Specialized To Design For The Same : Space Availability Constrains Cooling Tower Fit In Existing Basin High Wind Velocity & High Seismic Zone Low Noise Level. To Suit Optimum Operating Economy. Features : Pultruded Fiberglass Polyester Field-Erected Cooling Towers Heavy-Duty Cooling Towers Designed For Industrial Applications Optimal Thermal Performance Design Highly Resistant To Corrosive Environments

Material : Pultruded And Hand-Rail Frp

Number Of Flower : Cross Flow

Capacity : 2,000,000-20,000,000 Kcal/Hr Per Cell

We are capable of delivering the orders on time and at any desired Mumbai(India) as we are supported by up-to-the-minute facilities. We inspect each and every element of the raw material that that helps us in delivering qualitative products. Under the vigil supervision of professionals, we conduct quality examinations to ensure that the range is free from defects.

Material : Metal

Condition : New