Srs Jewelkon India Pvt Ltd Andheri East, Mumbai, Maharashtra

We are offering white rhodium plating. For an ever increasing demand of the world market for extremely white and bright plating. We have developed a new product called "ultra-shine™ - rj-1". the revolutionary characteristics of this product is, it's particularly suitable for rhodium plating on jewellery where a brilliant white and bright colour is required. ultra-shine™ rhodium plating solutions are prepared from 100% virgin rhodium obtained from only the highest quality resources. The result is a mirror bright, tarnish resistant finish that will add shimmering elegance to all your fine jewellery. Our product do not require special additives and therefore are easy to use. In addition, nickel plating is not required when doing rhodium plating over silver for a tarnish resistant finish. key features: * consistent quality * competitive pricing and quantity discounts * user-friendly * no additives required * unlimited technical support at no extra cost * no minimum orders * prompt courteous service.

Brand Name : Ultra-Shine

Ultra-Shine™ introduces Wax Magic Spray by which, you can improve your casting quality without investing in High Tech Setup. You can get firmly filled, porosity free smooth casting irrespective of Rubber mold, Casting machines, Alloys and Burnout cycle. Key Features: > Gives smooth casting surface. > Enhance shine and smoothness on the casted tree. > Reduces Porosity in the pieces. > Gives better flow to metal. > Reduces the polishing effort. > Avoid problems caused due to dust or powder residue on wax pieces. > Reduces manual effort to clean wax pieces. Problems it can solve: * Gas Porosity * Shrinkage porosity * Metal Cracking * Rough casting * Incomplete filling * Water marks on casted surface * Brittle prongs Technical: It’s a special solution which gives a smooth and uniform coating of a special material on the wax surface. This coating is transparent and has a very good elastic property. The wax pieces are sprayed with this spray after they are taken out from mold. After spraying, the coat dries in 2 – 4 min. Then you need to follow the normal process of tree making followed by investment pouring. When the tree is kept in the burnout cycle, this smooth coating will allow the wax to drain out at a faster rate. And then when the temperature reaches to 210° C, this coating itself will drain out like wax. Then what you will get is the smooth cavity in flask. This smooth cavity will help you to get smooth and shiny casting.

Brand Name : Ultra-Shine

Country of Origin : 230 V

We are offering ultrasonic cleaning solution. For an ever–increasing demand in the world market for extra cleaning and extremely bright appearance of diamonds, we have developed a new product called ultra-shine™ utp-18 the revolutionary characteristics of this product is that, it's particularly suitable for cleaning of jewellery pieces, where brilliant brightness is required on the metal as well as diamond area. key features: * it enhances diamond shine to a great extent. * it makes the base metal brighter. * it does extra-ordinary cleaning of the pieces. * it also enhances the rhodium quality and its durability. * extra-ordinary cleaning speed. * best solution for bulk production. * gives excellent luster on cz and colored stones without damage * long lasting luster * no maintenance * cost efficient. technical's: ultra-shine™ utp-18 is an ultra-sonic cleaning and shining liquid. It's purely neutral and cyanide free cleaner. The solution will not only clean the metal area but also gives good shine to the diamonds because of the special additives in it. Add 1% of ultra-shine™ utp-18 in 1 litre of water. I.e. 10ml of solution in every litre of water. operating conditions: operating temperature : 45 c - 70 c product agitation : optional ph value : 7 bath maintenance : ph10.

Brand : Ultra-Shine

SRS Jewelkon introduces new concept of cleaning of the 21st century. Ultra-shine ‘P’ series digital ultra-sonic cleaner with PSP (Pulse Sweep Power). This new technology reduces the cleaning time with enhancement in the shine of the pieces. Key Features: > Superior and deep penetrating. > Independent of water levels. > Reliability with extra power spread throughout the bath > Even cleaning and distribution of ultrasonic energy throughout the liquid. > Uniform and thorough cleaning of the surface without the risk of fine parts and sensitive instrument damage. > Extremely efficient electronics and transducer coupling to ultrasonic bath (Overall Approx. 95% efficiency) dispensed or reduces the additional use of heating. > Timer and sensor based controller. > Digital display and push buttons makes it more user friendly Technical's: * Micro controller based digital timer * With latest MOSFET technology * Automatic frequency tuning for maximum output * Low transducer losses permit maximum cleaning action * Rugged and easy to clean stainless steel housing. * Extensively protected electronic circuits for longer and safe operation. * Frequency 33 + 1 Khz * Input Voltage range of 170 AC - 270 AC, 50Hz * Inbuilt digital timer

Brand Name : Ultra-Shine

Ultra-shine™ brings you injection waxes for the jewellery manufacturing industry. After extensive research and development, this acclaimed product line has been founded by srs jewelkon india pvt. Ltd., making us the chief in jewellery waxes. we had developed the specialized formulas using our cutting edge technology to give you the finest performance. Ultra-shine™ waxes gives you excellent shine and surface finish on the casted pieces and are easy to remove from the moulds. Key features: * hard with good workability * excellent shine * best for wax setting. * smooth surface. * fast drainout due to good fluidity characteristics royal blue injection wax: > royal blue wax is a flexible wax > royal blue wax is suitable for cold climates or where more strength is required. > royal blue has a low shrinkage and good flow characteristics > royal blue can be used for wax setting or "stone-in-place" waxing > injection temperature - 72oc - 74oc technical data: colour : blue drop melting point : 70oc - 78oc congealing point : 64oc - 68oc penetration at 25oc : 5 - 10 ±0.1mm viscosity at 100oc : 80 - 110 mpa.s density : 1.05gcm3.

Brand Name : Ultra-Shine

We are offering jewelry care solutions. A unique product which will be provided on complementary basis to the end user of jewellery, by showrooms, to maintain & enhance the shine of their precious belongings. it’s particularly suitable for cleaning of jewellery pieces along with brilliant brightness on the metal as well as diamond area. It can be used on all types of gold, silver, brass & imitation jewellery, studded, non-studded, kundan jewellery and all kind of stones & diamonds. the characteristic of ultra-shine™ jewel care: * no need for special ultrasonic machine. * it enhances metal and diamond’s shine to a great extent. * because of its ph7 nature (neutral), it prevents oxidization of jewellery. * it will improve the shine and brightness of the rhodium as well. * also removes dust & finger prints from jewellery. steps to use ultra-shine™ jewel care: take few drops on cloth and wipe gently on the ornaments and then dry with tissue or cloth.

We are offering ultra shine cleaning solution. For an ever–increasing demand in the world market for extra cleaning and extremely bright appearance of the jobs, we have developed a product called “ultra-shine utp-27” ultrasonic cleaner. the revolutionary characteristic of this product is, it not only removes dust particles from the pieces, but also enhances its shine. features of ultra-shine utp-27 ultrasonic cleaner: * extraordinary cleaning speed. * it enhances shine of the pieces to a great extent. * best solution for bulk production. * no maintenance required.

Brand Name : Ultra-Shine

We are offering ultra shine alloys. "srs jewelkon" introduces alloys with the brand name ultra-shine™. Today, srs jewelkon is a company that offers a range of services that includes technical consultancies for the best use of alloys, rhodium and other consumables for jewellery manufacturing industry. we have more than 350 alloys which together cover the entire spectrum of colors, ranging from white to red through yellow. Given below are some of them. * yellow gold alloys > j1b : american yellow alloy for 8-18 kt. Casting and handmade work > jw503n : french italian yellow color alloy for 14-18 kt. Casting and handmade work > jw354n : dark orange yellow alloy for 14-18 kt. Casting and handmade work > jw13b : economical yellow alloy for 10-18 kt casting and handmade work > jhy22 : it is a hard yellow alloy for 21-23 kt. Casting and handmade work * white gold alloys > wnpf85 : nickel palladium free white alloy for 8-12 kt. > wd010 : it’s an economical white alloy for 10 - 18 kt. With very good whiteness > wd720 : nickel safe white alloy for 14-18kt. Casting > wd1016 : white alloy for 9-14 kt. > wd2013 : universal alloy for 10-18 kt. For casting and mechanical work * pink gold alloys > jw205n : swiss 5n pink color alloy for 18-22 kt. Casting and handwork > jw356n : deep red color alloy for 10-18 kt. Casting * green gold alloys > jw602n : 2n high quality greenish yellow alloy for 14 - 18 kt suitable for casting and handwork. > jw272n : economic greenish yellow alloy for 10 – 18 kt. Casting and handmade. * anti-tarnish silver alloys > jas88a : anti-tarnish alloy for 925 silver casting and handwork. > jw925a : ready to cast anti-tarnish silver (super -premium version) for casting and handwork * anti-tarnish sample line alloys > jbr11a : anti tarnish ready to cast yellow alloy especially for making sample line.

Brand Name : Ultra-Shine

We are offering tarnish remover. For an ever increasing demand of industries for extremely bright appearance of metal, we have developed a new product called "ultra-shine™ tr-27". it is particularly suitable for cleaning of silver, copper, copper alloys. It not only removes the oxide layer from it but also enhances the shine on the metal. key features: * it removes the oxide layer from silver and copper alloys without any weight loss. * no need for special ultra-sonic cleaning machine in your shop. * activates the surface of metal for plating. * because of its ph7 nature (neutral), it prevents oxidization of jewellery. * it makes the base metal brighter. * it will even enhance the shine and brightness of plating. * it acts as an anti-tarnish agent on silver jewellery and brass jewellery. technical's: for bright appearance of metal, good cleaning, good activation of metal surface is required. Practical study says that, better the cleaning and activation of pieces, more shinier it will be. "ultra-shine™ tr-27" tarnish remover solution not only cleans the metal area but also gives good shine to metal, because of the special activator additives and diamond boiling additives. As it's ph level is 7 (neutral nature), it prevents oxidation of pieces. how to use: just pour ultra-shine™ tr-27 in a beaker, and dip the pieces for 10-15 secs and the luster of metal will enhance. If the tarnish is very old then you can heat the solution upto 50oc and dip the pieces for 30-45 seconds.

Brand Name : Ultra-Shine

Packaging Type : Transparant

Material : Transparent Film

We are offering silver electro polishing solution, ultra-shine™ ssp-925 (silver electro - polishing solution) is a special product which increases your productivity with reduction in cost. The casted pieces are directly dipped in this solution, after spurge grinding. In few minutes, the surface of the pieces will become smooth and the pieces will be polished. key features: * it’s a cyanide free solution. * gives 99.9% silver recovery from the bath. * enhances shine on the metal and diamond area. * gives very smooth surface finishing. * casted piece is polished in few minutes. * does not harm stones. * no special machine required. * even the inner most surface is polished. technical's: electro - polishing of silver involves passage of electric current through a silver piece (anode), while it is submerged in a specially-designed ultra-shine™ ssp-925 solution. The process is essentially the reverse of electroplating. In that, the surface of the silver piece is actually stripped away. when used on silver and silver alloys, the process removes silver, copper, silver, nickel, palladium, (as well as non metallic’s) from the surface. Thus, it also enhances the corrosion resistance of the gold surface.

Brand Name : Ultra-Shine

We are offering shining activator. For an ever increasing demand of jewellery showrooms for extremely bright appearance of metal and diamonds, we have developed a new product called "ultra-shine™ se-45". it is particularly suitable for cleaning of jewellery pieces along with brilliant brightness on the metal as well as diamond area. key features: * no need for special ultra-sonic cleaning machine in your shop. * it enhances diamond shine to great extent. * because of its ph7 nature (neutral), it prevents oxidization of jewellery. * it makes the base metal brighter, because of which the shine of rhodium enhances. * it will even enhance the shine and brightness of rhodium. * it acts as an anti-tarnish agent on silver jewellery and brass jewellery. technical's: for bright appearance of diamonds and jewellery pieces, good cleaning, good activation of metal surface is required. Practical study says that, better the cleaning and activation of pieces, more shinier it will be. "ultra-shine™ se-45" shining solution not only cleans the metal area but also gives good shine to metal and diamonds because of the special activators and diamond boiling additives. as it's ph level is 7 (neutral nature), it prevents oxidation of pieces.

Brand Name : Ultra-Shine

Ultra-Shine™ Magnetic Polishing Machine is a special process which increases your productivity with reduction in cost and improvement in quality. Key Features: * Deal tumbler for finishing gold and platinum jeweleries * Polishing can be done in very short time * High speed rotation of the Magnet disc. * Powerful magnet which gives good torque * Timer, Clockwise and Anti-Clockwise rotation * Mirror finish shine * No pin marks on the pieces * Long lasting shine * No maintenance required * Mainly used for polishing the precious metals * Powerful, Reversible and reliable. * Long service life time. * Reasonable factory-direct price * Optional barrel size * Digital display showing time & Rotating direction * 2800 RPM (Rotation Per Minute) Process: The casted pieces are put in the Magnetic Pin-Polishing Machine. In few seconds, the surface of the pieces will become smooth and the pieces will be polished without any actual metal loss. Note: Ultra-Shine™ recommends Ultra-Shine™ - MTG-9 (Magnetic Polishing Liquid) for deriving maximum result from Magnetic Polishing.

Brand Name : Ultra-Shine

Packaging Type : piece

Form : ss body

Capacity : 3 ltr to 300 ltr

We are offering gold loss controller, itâ��s an electromagnetic field emitter which emits electromagnetic field of various different frequencies. This field excites the metal particles (platinum, gold, palladium, silver, copper, zinc) present in the atmosphere and forces them to settle down on the ground floor. Thus you can also recover your metal particles which you lose in atmosphere while filling and polishing it. How it is used? just connect the plug in a socket and place the machine in your filling, polishing and buffing department. Now start the normal manufacturing process. key features: * settles down all the precious metallic dust from the atmosphere. Ï� (platinum, gold, palladium, silver, copper, zinc) ï� * helps in reducing refinery work. Ï� * no other consumables required. Ï� * long life of the machine. Ï� * cost effective. Ï� * unlimited technical support at no extra charge. Ï� * no minimum orders. * ï� prompt courteous service.

Brand Name : Ultra-Shine

We are offering gold electro polishing solution. ultra-shine™ gep-18 (gold electro - polishing solution) is a special product which does 85% of your filling and 60% of your polishing work in few minutes. The casted pieces are directly dipped in this solution, after spurge grinding. In few minutes, the surface of the pieces will become smooth and the pieces will be polished. key features: * it’s a non cyanide based solution. * gives 99.9% gold recovery from the bath. * gives very smooth surface finishing. * casted piece is polished in just 4-5 minutes. * does not harm diamonds. * no special machine required. * even the inner most surface is polished. * can be used for all the karat of gold. * common liquid for white as well as yellow gold. technical : electro - polishing of gold involves passage of electric current through a gold piece (anode), while it is submerged in a specially-designed ultra-shine™ gep-18 solution. The process is essentially the reverse of electroplating. In that, the surface of the gold piece is actually stripped away. when used on gold and gold alloys, the process removes gold, copper, silver, nickel, palladium, (as well as non metallic's) from the surface. Thus, it also enhances the corrosion resistance of the gold surface.

Brand Name : Ultra-Shine

Ultra-shine polishing plant is a special process which increases your productivity with reduction in cost and improvement in quality. key features: * common plant for gold and silver. * gives 99.9% metal recovery. * reduces filling work up to 95% * reduces polishing work up to 90% * enhances shine of metal and diamonds. * gives very smooth surface finishing. * casted piece is polished in just 10 minutes. * does not harm stones. * even the inner most surface is polished. Process: - the casted pieces are directly dipped in the electro- polishing machine. In few seconds, the surface of the pieces will become smooth and the pieces will be polished. 85% of your filling and 60% of your pre-polishing work will be done in few seconds, without any actual metal loss. Then the pieces are kept in powder polishing with specially designed powder in vibro polisher. After some seconds, 95% of your filing and 90% of your polishing will be done without any actual metal loss. Technical�s: electro- polishing of metal involves passage of electric current through a piece while it is submerged in a specially-designed ultra-shine solutions. When used, the process removes gold, silver, copper, nickel, palladium, zinc, as well as non metallics from the surface. Thus, it also enhances the corrosion resistance of the metal surface. powder polishing with special powder in vibro polisher gives excellent smoothness and shine on the electro polished pieces. Thus further smoothens the pieces without any actual metal loss. a combination of both processes reduces your manual effort of polishing the pieces up to 90% to 95% without any actual metal loss. And also brings improvement in quality of the polish obtained.

Brand Name : Ultra-Shine

Ultra-shine™ - electro-polishing plant is special machine which increases your productivity, reduces production cost and improves quality. The casted pieces are directly dipped in this machine. In few minutes, the surface of the pieces will become smooth and the pieces will be polished. 85% of your filling work will be done in few seconds, without any actual metal loss. key features: * common plant for gold and silver. * gives 99.9% metal recovery. * reduces filling work up to 85% * enhances shine of metal and diamonds. * gives very smooth surface finishing. * casted piece is polished in just 5 minutes. * does not harm stones. * even the inner most surface is polished. technical: electro-polishing of metal involves passage of electric current through a piece while it is submerged in a specially-designed ultra-shine™ - electro-polishing plant with ultra-shine™ gold silver electro polishing solutions. when used, the process removes gold, silver, copper, nickel, palladium, zinc, as well as non-metallic's from the surface. Thus, it also enhances the corrosion resistance of the metal surface.

Brand Name : Ultra-Shine

Ultra-shine™ - electro plating plant is a special machine which increases your productivity with reduction in cost and improvement in quality. The final polished pieces are directly dipped in the gold silver plating solution. In few seconds, the surface of the pieces will be uniformly plated. key features: * machine comes with a 3ltr capacity bath * gives good durability of plating done. * it is very user friendly machine * value for money * does not harm stones. technical: electro-plating of gold involves passage of electric current through a gold piece (cathode), while it is submerged in ultra-shine™ - gpn solution (gold plating solution). Any gold shade (3n, 4n and 24 kt) color can be obtained in this machine just by varying the parameters of plating. note: ultra-shine™ recommends dgr-100 (degreasing salt) in electro-cleaning process to get extremely clean surface before plating.

Material : Stainless Steel

Capacity : 2.5 K.G

We are offering magnetic solution. for an ever–increasing demand in the world market for extremely high quality polishing, we have developed a new product called ultra-shine™ mtg-9 (magnetic polishing solution). it’s a concentrated liquid which is used in magnetic polishing machine. This liquid also cleans the oil or any invisible sticky particles which are deposited on the surface of the pieces. These particles spoil the light and luster of the pieces. key features: * cleans the pieces in an optimum way * extra ordinary cleaning speed * ph7 in nature, hence doesn't tarnish the pieces * can be used at room temperature * common solution for gold and silver. * eradicates the problem of white patches on pieces * best solution for bulk production * cost efficient technical's: ultra-shine™ mtg-9 is an magnetic cleaning and polishing liquid. It's purely neutral and cyanide free cleaner. add 3% of ultra-shine™ mtg-9 with the rest 1 litre of water. I.e. 30ml of solution in every litre of water. operating conditions: operating temperature : 30oc - 55oc product agitation : optional ph value : 7

Brand Name : Ultra-Shine