STEEL CORPORATION Kumbharwada, Mumbai, Maharashtra

This is high carbon steel strips with Martensite grain structure with high tensile strength, Produced by passing strips through long continuous heating furnace and oil quenching. Parts made from this strips have uniformity in hardness, flatness and shape as compared to parts made from annealed strips and then hardened in batches. These strips are usually available in C80 grade per the standard sizes available in stock but also can be provided in C75 & C98 grades if quantities required are viable to produce. These strips are supplied with various option as per requirement of customer. Edges Slit, rounded or dressed. Surface finish Bright polished, grey (un polished), polished and blued or golden.

This is a High Carbon cold rolled steel strip, with Spherodized grain structure, this steel is with a very high yield strength. This allows objects made of this steel to return to their original shape despite significant bending or twisting after hardening and tempering.

Usually in soft annealed condition but can also be supplied in temper rolled hardness in range between 200-350 Hv (band range is+- 40 Hv) These grade of steel is used where fatigue value and elastic limits are critical it is also used where high strength, hardness and wear resistant is needed. These steel has good forming and blanking properties but very poor drawing property.

Cold Rolled steel strip is highly engineered steel made from hot rolled steel coils. cold Rolling process changes the mechanical properties of steel allowing to meet forming and bending operations as well as to get good surface finish. Cold Rolled strip is produced by further processing hot rolled steel strip.Hot rolled steel strip is descaled with combination of chemical and mechanical process and then washed to remove acids . The strip is then further passed through cold rolling mill, this process is called cold rolling because steel is kept below its recrystallization temperature. Strip is rolled to final thickness either directly or with inclusion of annealing process at some intermediate thickness to enable further rolling. Due to this process one can achieve better thickness tolerance, good surface finish and desired mechanical properties

We are offering hardened & tempered steel strips . This is high carbon steel strips with martensite grain structure with high tensile strength, produced by passing strips through long continuous heating furnace and oil quenching. Parts made from this strips have uniformity in hardness, flatness and shape as compared to parts made from annealed strips and then hardened in batches.

This is high carbon steel strips with Martensite grain structure with high tensile strength, Produced by passing strips through long continuous heating furnace and oil quenching. Parts made from this strips have uniformity in hardness, flatness and shape as compared to parts made from annealed strips and then hardened in batches. These strips are usually available in C80 grade per the standard sizes available in stock but also can be provided in C75 & C98 grades if quantities required are viable to produce. These strips are supplied with various option as per requirement of customer. Edges Slit, rounded or dressed. Surface finish Bright polished, grey (un polished), polished and blued or golden.

We offer Hardened and tempered strips C62, C-75, C98, EN47 grades. This grade of steel strips are not commonly used in India, so it is not in our inventory but we do supply against an specific request from customer Minimum order quantity and lead time for delivery depends on size

This is a Medium Carbon cold rolled steel strip l with a very high yield strength. This allows objects made of this steel to return to their original shape despite significant bending or twisting after hardening and tempering. usually in soft annealed condition but can also be supplied in temper rolled hardness in range between 200-300Hv ( band range is +-40 Hv ) This grade of steel strip is used where fatigue values and elastic limits are not critical, is used for applications in which high strength, hardness and wear resistance are important. This grade of steel strips has good forming , blanking and bending properties.

This is a Medium Carbon cold rolled steel strip l with a very high yield strength. This allows objects made of this steel to return to their original shape despite significant bending or twisting after hardening and tempering. usually in soft annealed condition but can also be supplied in temper rolled hardness in range between 200-300Hv ( band range is +-40 Hv )This grade of steel strip is used where fatigue values and elastic limits are not critical, is used for applications in which high strength, hardness and wear resistance are important. This grade of steel strips has good forming , blanking and bending properties.

Application : Automobile Industry

We are offering annealed steel strips. This is an high carbon cold rolled steel strip, with spherodized grain structure, this steel is with a very high yield strength. This allows objects made of this steel to return to their original shape despite significant bending or twisting after hardening and tempering.

We are offering Annealed Steel Strips.This grade offers reasonably good fatigue value and elastic limity after hardening and tempering and compares with C65, CK67 grades.

We are offering cold rolled annealed strips. This is an medium carbon cold rolled steel strip l with a very high yield strength. This allows objects made of this steel to return to their original shape despite significant bending or twisting after hardening and tempering. Usually in soft annealed condition but can also be supplied in temper rolled hardness in range between 200-300hv ( band range is +-40 hv )

This is a Medium Carbon cold rolled steel strip l with a very high yield strength. This allows objects made of this steel to return to their original shape despite significant bending or twisting after hardening and tempering. usually in soft annealed condition but can also be supplied in temper rolled hardness in range between 200-300Hv ( band range is +/-40 Hv ) This grade of steel strip is used where fatigue values and elastic limits are not critical, is used for applications in which high strength, hardness and wear resistance are important. This grade of steel strips has good forming , blanking and bending properties. Physical properties Hardness is annealed condition 200Hv Max Yield strength 270 N/MM2 Elongation 30% Minimum Tensile strength 590N/mm2 Surface bright and free from any detrimental surface defect Edges Clean slit Form of Supply Usually in coils, thicker strips can also be supplied in cut to length and levelled strips Edges are slitted Coil ID 300-500mm as per mutual agreement with buyer Coil weight as per mutual understanding with buyer Surface finish is bright suitable for electroplating Width: Usually is between 300-450mm, however we can slit as per customers requirement. Thickness: 4.5mm to 0.20mm range as per following divisions and thickness tolerance.

Thickness : 0.20 MM TO 4.50 MM

Certification : IN HOUSE ACCURATE TEST CERTIFICATE

Grade : C55

This is a high carbon cold rolled steel strip, with spherodized grain structure, this steel is with a very high yield strength. This allows objects made of this steel to return to their original shape despite significant bending or twisting after hardening and tempering. Usually in soft annealed condition but can also be supplied in temper rolled hardness in range between 200-350 hv (band range is+- 40 hv) these grade of steel is used where fatigue value and elastic limits are critical it is also used where high strength, hardness and wear resistant is needed. These steel has good forming and blanking properties but very poor drawing property. physical properties hardness is annealed condition 200hv max yield strength 290 nmm2 elongation 25% minimum tensile strength 640nmm2 surface bright and free from any detrimental surface defect edges clean slit form of supply usually in coils, thicker strips can also be supplied in cut to length and levelled strips edges are slitted coil id 300-500mm as per mutual agreement with buyer coil weight as per mutual understanding with buyer surface finish is bright suitable for electroplating width: usually is between 300-450mm, however we can slit as per customers requirement. Thickness: 4.5mm to 0.20mm range as per following divisions and thickness tolerance.

Thickness : 0.20 MM TO 4.50 MM

Certification : IN HOUSE ACCURATE TEST CERTIFICATE

Grade : C80

Application : Oil & Gas Industry, Automobile Industry, Steel Industry

Thickness : 0.25 -4.0 (mm)

Width : 250 - 350 (mm)

This is high carbon steel strips with Martensite grain structure with high tensile strength, Produced by passing strips through long continuous heating furnace and oil quenching. Parts made from this strips have uniformity in hardness, flatness and shape as compared to parts made from annealed strips and then hardened in batches. These strips are usually available in C80 grade per the standard sizes available in stock but also can be provided in C75 & C98 grades if quantities required are viable to produce. These strips are supplied with various option as per requirement of customer. Edges Slit, rounded or dressed. Surface finish Bright polished, grey (un polished), polished and blued or golden. PROPERTIES Edges Sheared Finish Grey, bright polished, or blue Flatness 0.025mm Max per 25mm of width.