Stuffing Machines Dealers in Midc, Mumbai (76 products available)

the machines can be made available as per the requirement of customers starting from single lane up to four lanes. the machines are suitable for filling of ice-cream in small / big cup as well as big / small cone.

• Vacuum: 500 mm (25”) of Hg. At 1000 Ltrs./min. (30cfm)

Capsule filling machine is design for manufacturing Requirements of modern pharmaceutical procedures. The machine provides a high Degree of automation with higher levels of filling weight accuracy. These machines are suitable for filling and counting capsule machine of all size with powder, pellets etc. The machine is available in manual panel with manual capsule closing system with single or double loader. No painting finish on the machine surface thus it can avoid that the paint strip off and mix into the power, then fill into the capsules. Infinitely variable speed of filling table with independent power and fix point filling that result in accurate dosage. A special design allows for changing mold for different size capsules within 15 min easily, simply, precisely. A pneumatic join system can increase join power and smoothen join without any damage of capsule. Simple operation, only one operator required, and operating training can be done in 10 min. Automatic declutching of loader minimizes operator attention and ensures optimum production. The loading rings need only be placed in the closing section. The automatic closing cycle completes the closing and ejection of filled capsules in an enclosed chamber providing complete operator safety and no manual effort. Ease for cleaning and quick change over of parts greatly reduces downtime of the machine during product change. No noise, no public harm & low maintenance.

This is a vertical form, fill and seal machine for packing all types of free flow products. This machine shall make center seal pouches. This model is mainly designed to pack 100 gm to 1000 gm product packing. Maximum reel width can be used in this model is 450 mm open width with 76 mm core ID. Variety of filling systems can be used in this model as suitable to products. Pouch length is controlled by electromagnetic clutch brake and vector driven draw down pair of belts which is synchronized with PLC and print registration sensor. Unprinted packing material can also be used i9n this machine

• Accuracy: ± 1% to the filling volume 
• Production Rate Input Specification: 80 to 170 Vials / Min (Depends upon Size of Vial & Fill Volume)
• Container Dia.: 14mm to 56mm
• Container Height: 25mm to 110mm
• Rubber Stopper: 13mm or 20mm Butyl
• Fill Capacity: 2 ml to 100 ml
• Power Specification: 1.5 H.P., 3 Phase, 4 Wire System, 50 Hz.
• Overall Dimension: 2000mm (L) x 850mm (W) x 1680mm (H) (HLVF 120)

Automatic Liquid Vial Filling & Stoppering Machine functions on volumetric principle with diving nozzles. Manufactured using pleasing matte finished stainless steel, the machine is compact and versatile in design. The basic unit is comprised of turntable, unique co. Eccentric pre-gassing, SS316 stat conveyor belt, filling and post-gassing SS316 nozzles extremely efficient and precision built SS316 syringes, non- toxic synthetic rubber tubing's, simple reach compressed panel and with no stopper, no container, no filling System.Features No Vial No Filling System. S.S. Elegantly matt finished body. Inbuilt scrambler and Unscrambler. “No Rubber Stopper machines stop “system. Immediately stopper closing on vial after feeling.

• Color: Brown, Creamy, Green, Multicolor, Off White, Red, White
• Pattern: Plain, Printed, Striped,Plain and printed
• Feature: Durable, Easy To Carry, High Strength, Moisture Resistance, Perfect Finish, Recyclable, Water Proof
• Storage Capacity: 100kg, 20kg, 25kg, 30kg, 50kg,1 ton
• Feature: Easy To Carry
• Condition: New
• Industrial Use: Agriculture, Mailing, Promotion, Shopping
• Capacity: 500kg - 2000kg
• Safety Factor: 5:1
• Model: VTC-BNW/BGW
• Bag Size: 90x90x80 cm
• Loading Weight: 500KG to 2000KG
• Dimension: 90 x 90 x 120 cm

• Drive: 0.25 HP 3–Phase 50 Cycles
• Dimension: L 630 mm x W 490 mm x H 985 mm
• Weight: 100 Kg.

This equipment has been rated as ideal for small / medium scale Pharmaceuticals Units. The design is unique and extremely functional. The equipment is Simple to Operate, is time and labour-saving. The Automatic Capsule Loader is compact, occupies minimal space, is easily movable and is simple to operate. It gives higher production at a lower cost and with much better standards of accuracy than the earlier semi-automatic machines, which are being phased out gradually in most units.  AUTOMATIC CAPSULE LOADER can make a significant difference in your Production Department. Output :  Fills 300-hole plate in 28 seconds. The vertical loader can fill 2 or 3 manual capsule filling machine tray depending on the quality of the capsule and the sill of the operator.

• Driven Type: Electric
• Model: NAPF-1
• Number Of Filling Heads: Single Head
• Usage/Application: Industrial
• Air Consumption: 4 to 6 kg pressure
• Height of Conveyor: 860 mm (+ 50 mm adjustable height) 

• Hook Rod: 6
• Moment: 2 side
• Zig (Provided): 2
• Zig (Working at time): 1
• Input Voltage: 230V,50Hz
• J Hooks: 12
• Model Type: Table Top
• Dimensions: 33
• Tank Capacity: 9 ltr
• Hooks and Zigs for: 9 ltr
• Capacity in grams: 60 - 80
• Hook Layers: single layer

As a trusted Liquid Filling Machine Manufacturer, exporter and supplier we offer an advanced range that can be availed in a wide variety. The complete range is designed by experts to match international standards and manufactured using the precision components and other materials. Known for delivering superior performance, the Liquid Filling Machines offered by us are tested on various parameters to assure hassle-free operation together with a long functional life.

• Type: Manual Capsule Filling Machine, Canvas Paintings
• Certification: ISO 9001:2008
• Condition: New
• Automatic Grade: Manual
• Color: Grey
• Country of Origin: India
• Brand Name: ACE
• Weight: 60
• Capacity: 30

Salient Features : ·Design is cGMP - Current Good Manufacturing Practices compliance ·All Product contact parts AISI 316 & non contact parts AISI 304. ·Octagonal shape product container for Ideal dry mixer for lubrication of granules and homogenization mixing of multiple batches in to single batch. ·Available Capacity model in octagonal blender 25 kg to 5000 kg batch size. ·Enclosed rigid drive with reduction gear box and motor. ·"A" type rigid structure of the machine with two sides resting of product container. ·Product container having discharge with butterfly valve and man hole. ·Charging hole with hinged lid with seal for charging and cleaning. ·Safety reeling provided for rotating area of product container. ·Fixed baffles provided for lumps braking. ·Electric controls panel with cycle time

We are a reputed Manufacturer, Exporter and Supplier of Two Head Piston Filling Machine, which is designed as per the set industry standards. The Two Head Piston Filling Machine is highly appreciated for its superior performance and longer working life. Further, we offer Two Head Piston Filling Machine at market leading prices. Specifications Motorised or pneumatically operatedFilling range available from 5ml to 5ltrs in different machineIn pneumatic model complete microprocessor based systemAll Contact parts in stainless steel 304/316 quality Used For Filling Products Such As OilPaintVarnishThinnerInkMilkChemicalsLubricantsAdhesive

• Model: IPM-SFPM125
• Electric specifications: 380 V, 3 Phase, 50 HZ.
• Power consumption: about 20 KW/H
• Air consumption: 300 lt/min. 8 bar.
• Capacity: 28-30 bag/Min (1 kg weight per bag)

  Automatic salt filling and packaging machine takes and fills ready made flat bottom paper bags from magazine automatically. It fills the salt, compacts it. At the end station, it makes the pre-folding then takes out of vibration station. After compacting and prefolding, the bag goes through bag closing machine to be closed by hot glue.

• Features: Piston Feed Speed Adjustment, Extremely Accurate (+/- 1%) etc.

in these applications, the filling machine might be classed as a positive-displacement filling machine instead of a volumetric filling machine. These machines are manufactured with single or multiple filling heads, and they can be used manual as well as automatic operations. Each machine is also equipped with an adjustable piston stroke to permit a single unit to fill variable amounts of product. During operation, product is drawn into the piston cylinder head. As the piston reverses its travel, the product is discharged from the cylinder into the container. If it is mechanical then the piston is driven by an eccentric crank connected to the driven shaft of the motor or speed reducer. The crank or piston rod is slotted to allow the piston stroke to be adjusted as required. A filled container can then be moved along manually or integrated with conveyor. These processes can be repeated cycles can be performed to fill volumes that are higher than the cylinder capacity. Our volumetric piston fillers are used by industries in the food & beverage, cosmetics, and personal care, agricultural, animal care, pharmaceutical, and chemical fields.

• Features: The pump unit has a vertical dosing system, which aids in easy suction.

The LIMBUS 150 is a twin-head mediumfast speed tube filler able to produce about 45,000+ tubes per shift. Tubes have to be first manually transferred from the tube box, into the two cassettes on the machine. They are then loaded one by one into the holders on the turret. First the tubes are centered & oriented and then filled. They are then closed depending on the type of tube. In case of metal tubes, the tubes are flattened and crimped twice (or even thrice). In case of laminate plastic tubes, they are first heated on the inside periphery and then sealed. Batch details are then coded on the crimp (or seal) with metal stereos and the tubes are ejected out either into a collection container or to a tube-transfer system to link to the downstream MERLIN 180XC cartoner from Vectacraft.

• Capacity: 25000 Capsules /per hour
• Brand Name: Pharmachem
• Voltage: 230 V
• Country of Origin: Made in India
• Usage/Application: Pharmaceutical Industry
• Model Name/Number: Pharmachem
• Automation Grade: Automatic
• Body Material: Stainless Steel
• Warranty: 1 year plus service

• No. Of Stations: 5
• Cup Size: 50 to 500 ml
• Hopper Capacity: 21 Ltr
• Power Supply: 3 Phase 1 HP x1440
• Heater: 16 mm x L90mm

Model AT - 1HD • Automatic Cup and Glass Liquid Filling Sealing Machine• Fully Mechanical Working• Easy to operate• Easy to maintain   Technical Specification• Machine Capacity  - Mineral Water 200 ml 800-850 Cups/Hr  - Curd/ Lassi 200 ml 700-750 Cups/Hr  - Curd/ Lassi200 ml 500-600 Cups/Hr • Temperatiure Controller : 0 to 400 C (230V x 500w)• Filling Timer 1 Nos.• Product Contact Paers : SS 304• Machine Dimension LXWXH / 36" x 30" x 30" • Worm reduction gear box • Vacuum : 0.25 • Weight 400KG

• Condition: New
• Driven Type: Electric
• Brand Name: RIDDHI
• Automatic Grade: Semi-Automatic
• Machine Capacity: 60-240 bottles/min
• Dimension(L*W*H): AS PER SIZE
• Material: SS
• Bottle Size (Litre): 10 ML TO 1 LITRES
• Filling Range (millilitre): 10-1000 ML
• Power (Kilowatt): 1.5 KW
• Voltage (volt): 410 VOLTS
• Weight (kilogram): 120
• Production (Bottles/Hour): 20 TO 40 BPM
• Model No.: RDVLFM
• Capacity (per hour): 1200
• Material Grade: SS
• No. Of Heads: 2

Machine Applications Perfume Filling Glass Bottle Filling Low Viscosity Liquid Filling Best For Level Filling Best For Glass Bottle Filling

We are offering two head piston filling machine. Our two head piston filling machine are diligently designed as per the demands of the clients. These two head piston filling machine are highly reliable and durable and thus hugely demanded by clients in the global markets.

Syrup Filling Machine, Polishing Pan, Tablet Press Machine

The machine is suitable for filling cosmetic and pharmaceutical products into tubes, pouches, and other small containers. Integral cut off eliminates drips and product waste while saving the expense of separate cut off accessories. The same basic filling system is attachable on Linear, Rotary and FFS (form fill seal) machines.

� Suitable to fill a variety of semi viscous products in tubes � Option for lamy, plastic, metal tubes � Combi for lamy and metal tubes available (optional) � Manual or automatic tube feeding � Automatic tube loading from the tube magazine (Optional) � Automatic tube orientation � Single or double head option available � Diving nozzle for an accurate dosage of the bottom of the tube. � Hot air system with imported air gun for laminated tubes. � Possibility to realize sealing system following the Customer drawings such as round edge, curved seal, wave seal etc. � Simplified and easy change of size parts, without tools � Complete digital panel with optional PLC � VFD for main drive (optional) � Jacketed hopper with stirrer (optional) � Batch printing option available � HSAjet printer for special printing (optional)

• Capacity: 40,000 capsules per hour
• Material: SS
• Usages: Capsule Filling
• Grade: Fully Automatic
• Application: Pharmaceutical
• Features: Complying to 21CFR PART 11
• Features: Output Up to 40,000 capsules per hour,Fully Automatic,High Accuracy,cGMP compliant

• Accuracy: 2 to 4
• Vacuum Required: 15" To 20" of Hg at 35 cfm

High, medium and low fill augurs of stainless steel, Speed choice in the powder hopper, Change over within 30 minutes, Only 2 persons required for operation, No electronic parts; easy to operate and servicing, Device to drop tabletspellets into the body of the capsules Uniform flow of repose in the powder hopper Accuracy within 2 to 4 percentage.

• Voltage: 220V
• Frequency: 50 - 60 Hz
• Type: Filling Machine
• Weight: 100kg
• Power: 0.55KW
• Automation Grade: Automatic
• Filling Speed: 6kg/min - 12kg/min
• Power Source: Electric
• Size: (800mm600mm1100mm)

If you are searching for high quality Automatic Vial Filling, then you are the perfect destination for you. We present Automatic Liquid Vial Filling Machine that is designed to meet sealing applications in pharmaceutical industries. Used for sealing pharma products, Automatic Liquid Vial Filling Machine is highly demanded in the market. Some of the features due to which Automatic Liquid Vial Filling Machine is widely appreciated are high performance, maximum durability and easy operation. Besides this, we provide availability of Automatic Liquid Vial Filling Machine at the most reasonable prices. We are named as one of the leading Vial Filling Stoppering Machine Exporters from India. COMBINE AUTOMATIC VIAL FILLING AND RUBBER STOPPERING MACHINE SEALING MACHINE GMP MODEL FFS-80 FABRICA Combine Automatic Vial Filling and Rubber Stoppering Machine cGMP Model : FFS-80 is a very compact, comprehensive and elegantly finished cGMP designer Machine. The machine provides overall economy by reducing space, length of laminar flow and number of personnel in sterile area. Salient Features : Unit is rigid, vibration free construction for trouble free performanceNo Vial, No Fill systems saves valuable liquid and downtime for cleaningNo container, No stopper system is observedSpecial safety device to prevent damage to working partsCompact Line Saves space utilisation, reduces length of laminar flow and number of personnel in sterile areaObserving true GMPAll contact parts can easily be removed for mandatory requirement of sterilizationUnique pressing head ensures No Popping Off of stoppers

We are offering container filling machine. Empty containers are fed manually or automatically through turn table. The empty containers are carried by the belt conveyor up to the filling station.

We are one of the pioneer Tube Filling Machine Manufacturers from India, We Manufacture Automatic Tube Filling Machine, for Lami and Aluminum Machine, we also manufacture Semi Automatic and Hand operated machine. We manufacture Tube Filling Machine in Rotary and linear type of machine. We manufacture combi model where you can do Lami and Alluminium tubes by switch of one button. Features The proposed High Speed 12 Stations compact rotary Fully Automatic Lami/Plastic Tube Filling machine. Contact Part -SS-316. Model - GMP Capable to fills from 40-300ml SS-316 Syringe Pump Housing and Rotary Piston Filling Device. With Blow off Device Pneumatic Tail Cut-off System. NO TUBE - NO FILL Device. And Bottom up Filling System. Filling Accuracy +/ - 0.1%. Filling Speed 40 to 50 tubes per min. Tube diameter of 16-60mm and height 60-258mm, Tube holding Cup SS-304. And SS Spring Loaded Change Part 12 nos. Nylon Holders one Tube Size will be provided.   Jacketed Hopper single Head Type of Capacity of 40 liters. Temparetcher Controller With 3 KW SS Tubular Heater.Belt Less Stirrer Device with augur to keep the product in Continuous homogeneous condition. Geared Motor 0.5 HP, RPM-40 REMI make. With Label Sensor and controller.   Manifold cam indexing device Make Camfild.

These models are used for weighing and filling of powder granules flakes etc. in jumbo bag (Bulk Quantity). The feeder can be Screw, Flap-Gate of Rotary Feeder.The quantity of filling per bag can be maximum 2000kg.Models are available as Net weigher Gross weigher type as per requirement.Vibratory compaction system can be provided to vibrant bag during after filling.