Welding Neck Flanges Dealers in Girgaon, Mumbai

We offer high quality Duplex Steel Weld Neck Flanges in the market. The Duplex Steel Weld Neck Flanges are appreciated for their great strength and tolerance. They are resistant fatigue, corrosion, abrasion and erosion resistant. Duplex Steel Weld Neck Flanges are used in Desalination plants, Components for structural design, Storage tanks, Water heaters, Rotors, impellers and shafts.

We are offering weld neck flanges. Specification: standard: ansiasme ansib16.5, ansi b16.47, ansi b16.36, ansi b16.48 din: din2527, din2566, din2573, din2576, din2641, din2642, din2655, din2656, din2627, din2628, din2633, din2634. Size: 12" (15nb) to 48" (1200nb) class: 150#, 300#, 600#, 900#, 1500#, 2500# material & grade: stainless steel: astm a182, a240 f 304, 304l, 304h, 316, 316l, 316ti, 310, 310s, 321, 321h, 317, 347h, 904l carbon steel: astm asme asa 105 astm asme a 350, astm a 181 lf2 a516 gr.70 a36, a694 f42, f46, f52, f60, f65, f70. Nickel alloy: astm asme sb 564 uns 2200 ( nickel 200 ), uns 4400 (monel 400 ), uns 8825 inconel (825), uns 6600 (inconel 600 ), uns 6601 ( inconel 601 ), uns 6625 (inconel 625), uns 10276 ( hastelloy c 276 ) astm asme sb 160 uns 2201 (nickel 201 ) astm asme sb 472 uns 8020 ( alloy 20 20 cb 3 ) copper alloy: astm asme sb 61 uns no. C 92200 & astm asme sb 62 uns no. C 83600. Astm asme sb 151 uns no. 70600, 71500, c 70600 ( cu -ni- 9010), c 71500 ( cu -ni- 7030) astm asme sb 152 uns no c 10100, c 10200, c 10300, c 10800, c 12000, c 12200.

Size : 1/2"NB TO 36"NB IN Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc. SPECIFICATIONS AS PER THE INTERNATIONAL STANDARDASTM, ASME, API, AISI, BS, ANSI,  DIN, JIS, MSSP, NACE    MATERIALS : Stainless Steel Long Neck Weld Flange  – SS Long Neck Weld Flange  ASTM  A182 Grade : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. Duplex Steel Long Neck Weld Flange  ASTM / ASME A/SA 182 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61. Alloy Steel Long Neck Weld Flange  – AS Long Neck Weld Flange  ASTM SA 182  F1/F5/F9/F11/F22/F91Carbon Steel Long Neck Weld Flange  – CS Long Neck Weld Flange  ASTMA 105 Gr. F42/46/52/56/60/65/70 Low Temperature Carbon Steel Long Neck Weld Flange  – LTCS Long Neck Weld Flange  A350 LF2/A350 LF3 Nickel Alloy Long Neck Weld Flange  :Standard: ASTM / ASME SB 564 / 160 / 472.UNS 10276 (HASTELLOY C 276 Long Neck Weld Flange )UNS 2200 (NICKEL 200 Long Neck Weld Flange  ), UNS 2201 (NICKEL 201 Long Neck Weld Flange  ), UNS 4400 (MONEL 400 Long Neck Weld Flange  ), UNS 8020 (ALLOY 20 Long Neck Weld Flange  )UNS 8825 (INCONEL 825 Long Neck Weld Flange  ), UNS 6600 (INCONEL 600 Long Neck Weld Flange  ), UNS 6601 (INCONEL 601 Long Neck Weld Flange  ), UNS 6625 (INCONEL 625 Long Neck Weld Flange  ), Copper Alloy Long Neck Weld Flange  ASTM / ASME SB 61 / 62 / 151 / 152.C 70600 (CU -NI- 90/10) – Cupro Nickel Long Neck Weld Flange  C 71500 (CU -NI- 70/30) – Copper Nickel Long Neck Weld Flange  UNS NO. C 92200, UNS NO. C 83600, UNS NO.  UNS NO C 10100,C 10200, C 10300, C 10800, C 12000, C 12200 VALUE ADDED SERVICESHot Dip Galvanizing ,Epoxy Coating, TEST CERTIFICATE Mill Test Certificate as per EN 10204 / 3.1B

  WNRF Flanges Fabricated with finest quality of stainless steel, carbon steel etc., our range of weld neck flanges is high in demand across the globe. Available in standard as well as customized dimensions, these weld neck flanges features high performance, durability, reliability and corrosion resistance. We ensure reasonable pricing of the products and timely delivery of the consignment.

Alloy Steel Weld Neck Flanges which is available in different material and specifications. Our Steel Weld Neck Flange is fabricated with the wall thickness having the same dimensions of the matching pipes. Our range is catering to the requirements of various industries and is ideal for use at high pressure, and varied cold or hot temperatures.

Weld neck flanges are a flanges with a heavy welding neck which is hot formed from a circular section of steel plate having a small co-axial hole in the center. Specifications : ANSI B 16.5 from 1/2" to 24" and classes150 to 2500 (complete range) Applications : Recommended for orifice flanges. These work as substitute for slip-on-flanges in the cases where the diameter of the tube is very small and working pressure is very high.

Weld Neck Flange Manufacture We at Nexus steel Exporter and manufacture a wide array high quality ASME/ANSI/DIN standard Weld Neck Flanges in India. We offer Weld Neck Flanges for standard size of Carbon Steel Weld Neck Flanges and Stainless Steel Weld Neck Flanges. We are maintaing the stock of around 3000 ton of Weld neck pipe flanges in , Dammam, Saudi Arabia to provide quick delivery in Gulf Countries(GCC) for ongoing projects,so we an deliver Weld neck pipe flanges with in a day as per requirements of our valued clients in Saudi Arabia & all Gulf countries at best price, bcz. there is no shipping cost for each material again n again,due to our ready stock of Weld neck pipe flanges in Saudi Arabia, our clients can visit our stockyard in Dammam, Saudi Arabia & can inspect the material before placing the order & within no time delivery can be scheduled, by having largest stockyard in Middle East of Weld neck pipe flanges makes us different from all other manufactures & stockiest of Weld neck pipe flanges in INDIA & Saudi Arabia, so we can provide Weld neck pipe flanges at less than 10% cost & fastest delivery, we also can provide used Threaded flanges or Screwed flanges in Saudi Arabia,Bahrain, Qatar, Yemen, Kuwait , UAE, Egypt, Turkey, Singapore, Malaysia, Iran, Iraq at almost half of the price,even our pre used Weld neck pipe flanges also tested & check before buyback, so these Weld neck pipe flanges can be used even in Turnkey projects & in Different sectors like Oil & Gas, Petroleum, Chemical, Fertiliser, Construction, Dairy, Pharma etc. Stainless Steel & Duplex Steel Flanges Size : 1/2"NB to 48"NB, ANSI B 16.5 Standard : 150#, 300#, 600#, 900#, 1500#, 2500# in ASA 150 & ASA 300 Stainless Steel : ASTM A 240 / 182 F - 304 / 304H / 304L / 316 / 316H / 316L / 316Ti / 309 / 310 / 317 / 321 / 347 / 904L Duplex Steel : ASTM A 182 - F 51, F53, F55 Alloy Steel, Carbon Steel & Flanges Size : 1/2"NB to 48" NB, ANSI B16.5 Schedule : 150#, 300#, 600#, 900#, 1500#, 2500# in ASA 150 & ASA 300 Alloy Steel : ASTM A 182 - F5, F9, F11, F12, F22, & F91 Carbon Steel : ASTM A 105, ASTM A694, F42, F46, F52, F60, F65, F70 Low Temp. : A 350 LF2, A 516 GR. 70 Copper & Nickel Alloys Flanges Size : 1/2"NB to 6"NB, ANSI B 16.5 Standard : 150#, 300#, 600#, 900#, 1500#, 2500# in ASA 150 & ASA 300 Copper Nickel : C70600(90 : 10), C71500(70 : 30), C71640 Nickel : UNS N02200, N02201 Monel : UNS N04400, N05500, Alloy 20 Inconel : UNS N06600, N06601, N06625, N08800, N08810, N08825 Hastelloy : UNS N10276, N06022, N10665, N06455 Titanium : Gr. 1, 2, 3 DTH 3.7025, DTH 3.7035, DTH 3.7055

We bring forth a range of highly durable Weld Neck Flanges for clients across the world. These Weld Neck Flanges are rigorously tested for quality and receive appreciation from the clients for the same. The Weld Neck Flanges are offered to the esteemed clients at highly reasonable rates. Salient Features Top class qualityAbrasion resistantCorrosion resistantHighly resilientAccurate dimensions Used In Chemical industryShip buildingPetroleum industryPetrochemical industry etc. Material : 4301/1.4306/1.4401/1.4404/1.4541 (304ss,316ss and 321ss)) Relative Flange Standards include DIN 2527 (PN6, PN10, PN16 PN25, PN40),DIN 2533, DIN 2573 PN 6, DIN 2576 PN10DIN 2631 PN6, DIN 2632 PN10, DIN 2633 PN16, DIN 2634 PN25, DIN 2635 PN40 FlangeANSI B16.5 150LB (300LB, 600LB) Blind/ Slip-on/SCH 10(SCH 40, SCH 80) Welding Neck/ Plate/ Socket weld/ Threaded/ Lap Joint FlangeJIS 5K, 10K, 16K, 20K, 30K (PL, SO, BL, TH, SW), JIS 30K Weld Neck FlangeBS 10 Table D/E/F/H Flange, BS 4504 FlangeDIN EN 1092-1 FlangeAS2129 Flange Nominal pressure PN0.25-PN42.0 The lead time without shipping About 20 days Nominal width DN10-DN600 (the diameter of flange is 75mm-800mm, the thickness of flange is 8mm-100mm)

We are engaged in manufacturing an extensive range of Socket Weld Flanges, which is welded to the end of a pipe. This welding helps in connecting two pipes together. Moreover, these products are premium in quality and available in varied shapes and sizes. We ensure that our products match with the industry standards.

Weld neck flanges are a flanges with a heavy welding neck which is hot formed from a circular section of steel plate having a small co-axial hole in the center. Weld Neck Flanges are available with following specifications :-Stainless Steel : ASTM A 182, A 240Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750Carbon Steel : ASTM A 105, ASTM A 181Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276Copper Alloys : Copper, Brass & GunmetalSize : 1/8" NB TO 48"NB.Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.StandardANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48DIN :DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673B.S : BS4504 , BS4504, BS1560, BS10

Weld Neck Flanges are flanges that are designed to be joined to a piping system by butt welding. the WN Flange is relatively expensive because of its long neck, but is preferred for high stress applications. The neck, or hub, transmits stresses to the pipe, reducing stress concentrations at the base of the Welding-Neck flanges. The gradual transition of thickness from the base of the hub to the wall thickness at the butt weld provides important reinforcement of the Weld Neck flange. The bore of the Weld-Neck flange matches the bore of the pipe, reducing turbulence and erosion. We are counted amongst the chief Manufacturers, Exporters, Importers, and Suppliers of the superior quality variety of Weld Neck Flanges. The Weld Neck Flanges offered by us find their application in various industrial processes. Our quality-tested assortment of Weld Neck Flanges includes Carbon Steel Weld Neck Flanges, Stainless Steel Weld Neck Flanges, Alloy Steel Weld Neck Flanges, Duplex Steel Weld Neck Flanges, Nickel Alloy Weld Neck Flanges, and Copper Nickel Weld Neck Flanges. Our range of Weld Neck Flanges is widely appreciated by the clients, owing to their excellent quality and durable life. Furthermore, these Weld Neck Flanges are available in various specifications and sizes in order to fulfill the clients needs.   Specifications: Size: 1/2" (15mm) NB TO 24" (600mm) NB (ABOVE 24" NB MAKE TO ORDER BASIS) Nominal Pressure Range: 150# - 2500#  Schedule: 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160, and XXS  Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)  Grades Available: CARBON STEEL: ASTM A 105, LF 2, LF 3 ALLOY STEEL: ASTM A182 GR. F1, F 5, F 9, F 11, F 22, F 91 STAINLESS STEEL: ASTM A182 GR. 304/304L, 316/316L, 310, 347, 321, 904L NON FERROUS METALS: COPPER, HASTELLOY C 276, INCONEL 600/625/825, BRASS, MONEL 400/500 ,TITANIUM, TANTALUM, BRONZE, ALUMINIUM, HIGH SPEED STEEL, ZINC, LEAD Flange Standards: ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 B.S: BS4504, BS4504, BS1560, BS10    

Simplex Metal & Alloys is one of the leaders amongst manufacturers and exporters of high quality pipe fittings, buttweld fittings in alloy steel, carbon steel, nickel alloys. Our products have found various applications in different industrial requirements, including - Oil & Gas, Chemical, Petrochemical, Power Plant, Pulp & Paper, Environmental & Water Projects, Engineering Projects and more. Through regular and consistent supply of our products at industry leading prices, we have established ourselves a reliable player in the industry.

Order from us Socket Weld Flanges of varied designs, sizes and finish as per requirement. Our company is one of the eminent Manufacturers, Exporters and Suppliers of Socket Weld Flanges in Maharashtra, India. We design and fabricate them using the latest CAD/ CAM technologies. We use premium metals and efficient make-to-order process to provide customers with Socket Weld Flanges that are robust, excellently finished, rust proof and reliable. In addition, we offer customized Socket Weld Flanges at competitive prices.

Gautam Steel is a specialised manufacturer of high quality ASME/ANSI/DIN standard weld neck flanges in India. We offer immediate delivery programs for standard size of carbon steel weld neck flanges and stainless steel weld neck flanges. Weld neck pipe flanges are connected to the pipe by welding the pipe to the neck of the pipe flange, which helps to pass on the stress from the weld neck to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck pipe flanges. Weld neck pipe flanges are generally used in high pressure applications, where hot or cold temperatures exist. The inside diameter of a weld neck pipe flange is machined to match the inside diameter of the pipe. We offer weld neck pipe flanges manufactured at our facility to companies in various industries including shipbuilding, power generation, petrochemical plants, oil refineries, waste water treatment plants, paper mills, pharmaceutical plants and turnkey projects among others. Our products are widely exported to countries and regions such as the United States, Europe, Russia, Turkey, Malaysia, the UAE, Saudi Arabia, Iran, Brazil, Chile, Mexico, South Africa, Jordan, Tunisia, Vietnam, Indonesia, Thailand, Singapore, Colombia, and Sri Lanka. Size: 1/2″ (15 NB) to 48″ (1200NB) Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings Pressure Ratings: Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc. Carbon Steel Weld Neck Flanges: ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8 Stainless Steel Weld Neck Flanges: ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L Alloy Steel Weld Neck Flanges: ASTM A182 F1, F5, F9, F11, F22, F91 Special Alloy Weld Neck Flanges: Duplex, Super Duplex, Nickel Alloys Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) Coating/Surface Treatment: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized Value Added Services: CNC Machining, Customised Flanges Marking & Packing Products are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases. All flanges are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on our products. Quality Assurance At Gautam Steel, all fittings and flanges are subject to strict inspection at each stage of the production process, from starting material purchasing to product dispatch. They are visually examined for conformity to ASTM, ASME, MSS, DIN, EN, and JIS codes and standards. Upon request, official certified Inspection Agencies can be called in to witness the material reports, dimensions and quality conformity of products.