Wired Networks Dahisar, Mumbai, Maharashtra

Complying with 802.11g standard, the WL-8317 provides up to 54Mbps wireless connection for laptop users who want to access network resource. By employing a dipole antenna, the WL-8317 provides 360 degrees coverage of wireless access. Support of WPA / WPA2 high-level encryption keeps your wireless network from unauthorized access and ensures secured data transfer. For more detail information.

Complying with the IEEE 802.11g standard, the WL-U356M provides simple, reliable, high-speed wireless connectivity for both desktop and laptop users. By combining two technologies---USB 2.0 and 802.11g---the gadget delivers data at speed up to 54Mbps, five times the speed of existing 802.11b devices, and spares the effort of opening up the case of your desktop computer. For more detail information.

In computer networking, a wireless access point (WAP) is a device that allows wireless communication devices to connect to a wireless network using Wi-Fi, Bluetooth or related standards. The WAP usually connects to a wired network, and can relay data between the wireless devices (such as computers or printers) and wired devices on the network. In industrial wireless networking, the design is rugged with a metal cover, a Din-Rail mount, and a wider temperature range during operations, high humidity and exposure to water, dust, and oil. Wireless security includes: WPA-PSK, WPA2, IEEE 802.1xRADIUS, WDS, WEP, TKIP, and CCMP (AES) encryption. Unlike home consumer models, industrial wireless access points can also be used as a bridge, router, or a client. The WAP-4033 supports both IEEE 802.11b and IEEE 802.11g standards. You can use it for connecting to an existing WLAN, or to build up a new wireless LAN. Except essential AP mode, the WAP-4033 provides Repeater, Bridge, WDS, and Client modes to accommodate all kinds of network topology. High data rate (up to 54Mbps) performing allows faster communication between LAN and WLAN. Maximize network efficiency via using the WAP-4033 while minimizing your network investment and maintenance costs. For more detail information

The WRT-416 allows you to setup trigger ports of special applications, and let you utilize Internet service smoothly. The firewall features can protect your Intranet PCs from illegal access and variant DoS attacks from the Internet. The Virtual Server and DMZ functions let you setup your servers in the Intranet and still provide service to the Internet users. Access Control function allows you to block the Internet service to different clients. For more detail information

The WAP-4033 supports both IEEE 802.11b and IEEE 802.11g standards. You can use it for connecting to an existing WLAN, or to build up a new wireless LAN. Except essential AP mode, the WAP-4033 provides Repeater, Bridge, WDS, and Client modes to accommodate all kinds of network topology. High data rate (up to 54Mbps) performing allows faster communication between LAN and WLAN. Maximize network efficiency via using the WAP-4033 while minimizing your network investment and maintenance costs. For more detail information

Variable Attenuator Connector (VAC) utilizes air gap technology to create attenuation. This part combines the functions of a connector with a variable attenuator.

The conductor is made of electrolytic grade, bright annealed bare solid copper conductor of 0.45/ 0.5 mm diameter and is insulated with a special grade polyethylene compound on the latest state-of-the-art extruders. The cores are twisted together with a uniform lay on a special purpose imported machine, according to the color code to form pairs. The pairs are bunched together in such a manner so as to minimize cross talk. The cable is then jacketed with a specially formulated PVC compound with fire retarding properties. A nylon rip cord provides an effective means of slitting the jacket without damaging the insulation. These are ideal because of low attenuation and low cross talk. Jelly Filled Telephone Cables Effective communication plays a vital role in the economic growth of any country. These cables are widely used by all telecom companies and some government organizations like BSNL, MTNL, Railways, Defence and Manufacturing units. These cables are manufactured using bright annealed, 99.97% pure base copper, imported virgin high density polyethylene, high quality poly-aluminum (APL) tape and galvanized steel tape.

These cables both in dielectric and armoured versions from 2 fibre to 96 fibres. These are manufactured by the center tube design. Compared to the conventional standard tube design used in India, the central tube design offers several advantages. Both the types Armored and unarmored cables are available. Used mostly for patch cord and backplane applications. Used for desktop connections.

Our rack mount fiber optic patch panel (LIU) is a wiring device used to terminate, protect and organize the fiber optic cables and optical fibers in the fiber optic communication networks. The fiber patch panel is in a standard 19 inch size as per required number of ports.

SFP can be regarded as the upgrade version GBIC, SFP is short for Small Form-factor Pluggables, unlike GBIC with SC fiber optic interfaces is with LC interface and the main body size of SFP is only about half of GBIC, which makes SFP space saving. Signal transmitting rate of these modules range from 100Mbps up to 4Gbps or more, working distance of these SFP transceiver modules can be from 500 meters to 100 kilo meters, working wavelength of different SFP modules are typically 850nm, 1310nm and 1550nm, there are also CWDM type SFP transceivers available. 100Base-FX SFP Transceiver The MFB SFP transceivers using a long wavelength (1310nm) FP LD enable data transmission up to 2km on a multimode optical fiber and up to 60km on a single mode optical fiber. 1000Base-SX/LX SFP Transceiver The MGB family SFP Mini-GBIC Gigabit Ethernet module can install into Switch products with SFP Mini-GBIC interface. The distance can be extended from 100 meters (TP), 550 meters (Multi-mode, LC), up to 120 kilometers (Single-mode, LC).

Fiber optic patch panel is an integrated unit for fiber management, we offer wall mounted fiber optic patch panel and rack mounted fiber optic patch panels, these equipment function is to fix and manage the fiber optic cables inside the box as well as provide protection. Cable management refers to an important step during the installation of building services (ie electrical services) and the subsequent installation of equipment providing means to tidily secure electrical, data, and other cables. The term is often used interchangeably to refer to products used for the purpose of managing cables or to the workmanship carried out to cables whilst being installed.

The FPS-1010M allows you to share your MFP (Multi-Function Printer) to your network. Not only printer, but also scanner, fax and card reader can be shared to your network at the same time. With Windows base operation utility, each user can get the MFP to print and scan your document, send a fax or reach the data from the card reader of MFP via FPS-1010M. For More information,

A serial cable is a cable that can be used to transfer information between two devices using serial communication, often using the RS-232 standard. Serial cables may use D-subminiature connectors with 9 or 25 pins, but other connectors are used. A specially wired cable used for connecting two similar computer serial ports directly is known as a null modem. Empirically tested combinations of bit rate,serial ports, cable type, and lengths may provide reliable communications, but generally RS 232-compatible ports are intended to be connected by at the most a few tens of metres (yards) of cable. Null modem cables Use this cable between two DTE devices (for instance two computers)   The purpose of a null-modem cable is to permit two RS-232 DTE devices to communicate with each other without modems or other communication devices (i.e., DCE"s) between them. These cables also support custom designed data transfer devices equipped with DB9, DB37 or DB25 ports. When trying to run a serial connection over a very long distance, it is better to use a ethernet line to do so. It will cut down on signal loss and interference. For that industry prefers following cables: • RJ45 (8-pin) to DB25(M) Cable • RJ45 (8-pin) to DB25(F) Cable • RJ45 (8-pin) to DB9(M) Cable • RJ45 (8-pin) to DB9(F) Cable All our molded serial cables are fully populated and combine foil shield construction with a PVC jacket for durability. Thumbscrews are attached for a reliable connection. 

Exceptional material properties and cable design High ACR values- providing low BER (Bit Error-Rate) Exceeds Cat 5e Performance Extremely high pair-balance-providing excellent EMC (Electromagnetic compatibility) Minimum radiations and maximum noise immunity. RoHS Compliance ANSI/TIA/EIA-568-B.2

Fiber optic converters are used in the fiber optic network to transform the signals sent from fiber glass to traditional UTP cables. They are typically used in Ethernet as physical layer networking equipment. Working distance of the fiber optic converters are different .for typical multimode fiber optic converters, their working distance max is about 2km, for single mode fiber media converters, their working distance can be 20km, 40km, 60km, 80km and up to 120km.     Standard Fast Ethernet Media Conversion 10/100Base-TX to 100Base-FX Bridge Media Converters It is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. 10/100Base-TX to 100Base-FX SMI Fast Ethernet Converter The SMI (Small Multimedia Interface) is one kind of POF (Plastic Optic Fiber) interface that can suitable for low-cost and high-speed data transmission. 1 SFP / 2 TP Redundant Fast Ethernet Media Converter It is designed for critical networks that require fibers or copper links to automatically recover less than 10ms, such as ISPs, telecom, hospitals, banks and enterprises. 2 SFP / 1 TP Redundant Fast Ethernet Media Converter With the 2-Port redundant Mode, it provides less than 10ms redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link down, it forwards the packet to the other port of the backup pair. 100Base-FX to 10/100Base-TX PoE Media Converter More than a Fiber Media Converter and also can be a Power over Ethernet Injector as well! The best data link and power sourcing solution for long reach network equipment.

Fiber optic patch panel is an integrated unit for fiber management, we offer wall mounted fiber optic patch panel and rack mounted fiber optic patch panels, these equipment function is to fix and manage the fiber optic cables inside the box as well as provide protection.     Cable management refers to an important step during the installation of building services (ie electrical services) and the subsequent installation of equipment providing means to tidily secure electrical, data, and other cables. The term is often used interchangeably to refer to products used for the purpose of managing cables or to the workmanship carried out to cables whilst being installed. Cable management is important in many fields, such as IT, communications, power distribution, facility wiring, local area networks, and so on. There are two main types of the OF Patch panels: 1)Rack Mount 2)Wall Mount. The rack mount fiber optic patch panel is a wiring device used to terminate, protect and organize the fiber optic cables and optical fibers in the fiber optic communication networks. The fiber patch panel is in a standard 19 inch size, with different models including 1U 24 ports, 2U 48 ports. Our rack mounted fiber patch panels can be drawer type or ecnomic type without draw design. We supply wall mount fiber optic patch panels with waterproof and dust proof design optional. There different models to fit for 12 core fiber,24 core fiber,36 core fiber,48 core fiber core fiber applications.

An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so that light can pass. Most optical fiber connectors are spring-loaded: The fiber endfaces of the two connectors are pressed together, resulting in a direct glass to glass or plastic to plastic contact, avoiding any glass to air or plastic to air interfaces, which would result in higher connector losses. In the development of fiber optic technology over the last 30 years, many companies and individuals have invented the "better mousetrap" - a fiber optic connector that was lower loss, lower cost, easier to terminate or solved some other perceived problem. In all, about 100 fiber optic connectors have been introduced to the marketplace, but only a few represent the majority of the market. Here is a rundown of the connectors that have been the leaders of the industry. We are providing some of the popular FO connectors: In the development of fiber optic technology over the last 30 years, many companies and individuals have invented the "better mousetrap" - a fiber optic connector that was lower loss, lower cost, easier to terminate or solved some other perceived problem. In all, about 100 fiber optic connectors have been introduced to the marketplace, but only a few represent the majority of the market. Here is a rundown of the connectors that have been the leaders of the industry.

Fiber optic "cable" refers to the complete assembly of fibers, strength members and jacket. Fiber optic cables come in lots of different types, depending on the number of fibers and how and where it will be installed. It is important to choose cable carefully as the choice will affect how easy the cable is to install, splice or terminate and what it will cost.

The function of attenuator in fiber optic system is to reduce the optical power in the fiber. The most common application of the attenuator is to balance the optical power between multi-fiber systems and to reduce the receiver saturation that limits the system performance.   FO Attenuator   Fiber Optic Attenuator FC, SC/APC, ST, LC, MU, FC/APC, SC, LC/APC plug type fiber optic attenuators.

Fiber optic adapter are used in fiber optic connection, the typical use is to provide a cable to cable fiber connection. This fibre optic adapter is used to connect the same type fiber optic connectors while hybrid adaptors are the fiber optic adaptor types used to connect different kinds of fiber optic connectors. Fiber optic adapters are known for its stability, they provide reliable solution for fiber connections, single mode fibre optic adaptors and multimode fiber optic adaptors available on request. These adapters are also available in Simplex and Duplex type. Fiber Optic Hybrid Adapters In many applications various fiber optic connectors are used at the transmission outlet. Connectivity problems can be overcome by using hybrid fiber optic adapters, eliminating the need to change connectors. Hybrid fiber optic adapters are available in the SC/ST, SC/FC and FC/ST configurations, they come in either plastic or metal. All hybrid fiber optic adapters are supplied with dust caps.   The function of attenuator in fiber optic system is to reduce the optical power in the fiber. The most common application of the attenuator is to balance the optical power between multi-fiber systems and to reduce the receiver saturation that limits the system performance. Fiber Optic Attenuator FC, SC/APC, ST, LC, MU, FC/APC, SC, LC/APC plug type fiber optic attenuators.