Wuerth India Private Limited JB Nagar, Mumbai, Maharashtra

Properties: Material: PVC - Polyvinyl chloride Colour: Yellow Material of the mesh: Polyester Internal diameter in inches: 1 in Internal diameter: 25 mm Wall thickness: 3.65 mm Hose length: 50 m Working pressure: 8 bar Conditions for operating pressure: at 23°C Burst pressure: 20 bar Burst pressure conditions: at 23°C Min.max. temperature resistance: -15 to 60 °C Bending radius: 125 mm Ultraviolet resistance: Yes Silicone-free: Yes Cadmium-free: Yes

Properties: Container capacity: 90 l Min.max suction capacity: 1,5-2 lmin Features Extraction by vacuum. Transparent suction head allows for optical control of the state of waste oil. By keeping on the maximum vacuum the oil can be sucked off from several cars consecutively (max. 65 liters). Main suction pipe plus 6 suction probes & connection adapters can be applied to most vehicles. 2 swivel wheels and removable small parts bin. Vacuum-charged unit is completely portable and easy to use. Great for cars, boats, motorcycles.

Vehicle sandpaper disc, ARIZONA perfect DAPAP-HOKLP-21HO-P40-D150MM ARIZONA PERFECT Application : Grains P40-P120 Initial sanding of factory primers on new parts (KTL paints), sanding off old paint, sanding out stone-chip damage and rusty areas, sanding dented areas down to bare metal, pre-sanding of polyester and fine filler, levelling of filler edges. Grains P100-P600 Initial sanding of old paint during transition to new paint, matting of top-coat paints, sanding of plain paints, thermoplastic acrylic paints, clear lacquers, water-based paints, thick-film, primer, synthetic resin and nitro fillers, spray filler, 2-component and MS filling primers, and reaction primers.

Properties: Suitable for mounting rail: 36 x 36 mm Width: 18 mm Length: 30 mm Thread type x nominal diameter: M10 Thickness: 6 mm Material: Steel Product weight (per item): 21.399 g Surface: Galvanised Thread type: Metric thread

Properties: Container capacity: 90 l Min.max. height: 1400-1900 mm Tray diameter: 580 mm Tray height: 300 mm Tray capacity: 13 l

Properties: Coating weight per m²: 145 g Length of roll: 50 m Roll width: 1.5 m Air layer thickness equivalent to water-vapour diffusion: 0.1 m Area: 75 m² Number of rolls per pallet: 20 PCS Weight of roll: 11.5 kg Resistance to penetration of water: W1 Resistance to tear propagation (transverse): 228 N Resistance to tear propagation (longitudinal): 208 N Transverse tensile force per 50 mm: 220 N Longitudinal tensile force per 50 mm: 270 N Min.max. temperature resistance: -40 to 80 °C

Tool case with 91 tools TL-SET-MIX-91PCS Art.-no.: 096593 120 This 91-piece tool case is ideal for use on the move. Includes 91 tools Extensive set All common tools in one case High-quality case Plastic case with aluminium hinged lock Dimensions: 423 x 360 x 86 mm Scope of delivery: ZEBRA combination wrench, 11 parts: 8 - 22 mm Combination pliers 180 mm Hammer 400 g Water pump pliers 250 mm Voltage tester 3.0 mm, 150 - 250 V ZEBRA 14 inch ratchet 135 mm

Properties: Material: Wood Length Height Width Product weight (per item) Art.-no. Quantity PU pricePU 183 mm 37.5 mm 38.5 mm 86 g 0899480 x 1 Add to cart 250 mm 12.5 mm 20 mm 43 g

Properties: Anchor diameter: 8 mm Anchor length (l): 200 mm Hole diameter in component (d Bau): 9 mm Version: With washer, sealing washer and hexagon nut Nominal drill-bit diameter (d 0): 22 mm Thread diameter (d thr): 8 mm Max. attachment height (d a): 155 mm Material: Steel Minimum cavity depth (h): 75 mm Sealing-washer material: Hypalon Surface: Galvanised Thread type: Metric thread

Special, highly active system cleaner for 2- and 4-stroke engines. Cleaning without removal Overhead valve Hard-to-reach areas can be easily accessed Outstanding cleaning performance Optimum carburettor performance Perfect throttle valve function Engine runs smoothly Faults caused by dirty throttle valves or carburettors are rectified. The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

SYSTEM INSERT, PLASTIC, 4.4.1 A fixed compartment for orderly storage and retrieval of various small parts. Can be used in combination with other system dividers. Properties: System dimensions: 4.4.1 Width x depth x height (external dimension): 335 x 231,25 x 54 mm Number of compartments: 8 PCS

Properties: Thread type x nominal diameter x length: M8 x 80 mm Material: Steel Property class: 4.8 Surface: Galvanised Internal drive: TX25 Width across flats: 6 mm Thread length (thread for woodwork): 37 mm Thread length (metric thread): 30 mm

Properties: Anchor diameter: 10 mm Hole diameter in component (d Bau): 14 mm Minimum cavity depth (h): 90 mm Nominal drill-bit diameter (d 0): 30 mm Max. attachment height (d a): 140 mm Material: Steel Surface: Galvanised Version: Rubber spacer, collar and hexagon nut Breaking force of the anchor (F failure): 11 kN Thread type: Metric thread Anchor length (l): 180 mm Material of the sleeve: Polyamide

Properties: Anchor diameter: 4 mm Hole diameter in component (d Bau): 5 mm Minimum cavity depth (h): 40 mm Nominal drill-bit diameter (d 0): 14 mm Max. attachment height (d a): 69 mm Material: Steel Surface: Galvanised Version: With washer and MS knurled nut Breaking force of the anchor (F failure): 2 kN Thread type: Metric thread Anchor length (l): 90 mm

For detailed information, other images and documents, please select individual articles from the following table.

For detailed information, other images and documents, please select individual articles from the following table. Specification Ready to solder in five seconds Plastic housing with inbuilt illumination of soldering point Two-core cable with European plug Insulated in accordance with international standards Weight 650 g Case fits ORSY 100 shelving

Properties: Contents: 250 ml Colour: Green Smellfragrance: Characteristic Shelf life from production: 24 Month Density: 1.03 gcm³ Density conditions: at 20°C pH value: 6.8 EN standard: 29454-1

Properties: Weight of content: 250 g Colour: Grey Material designation: S-Sn97Cu3 Shelf life from production: 24 Month EN standard: 29453, 29454-1 DIN: 8511 pH value: 7 Min. flashing point: 135 °C

A handy all-rounder: can be used as a soldering iron or a hot-air gun. Properties: Max power: 100 W Specification : Battery-powered for mobile use Convenient Piezo ignition Continuously adjustable power level Includes protective cap

Properties: Suitable for screw: M12 Diameter: 30 mm Length: 38 mm The three threaded rollers automatically grip positively into thread when screwing in. When unscrewing, the threaded rollers open automatically and release the thread Can be used with 12" square drive for a ratchet screwdriver or with an adapter for an electric screwdriver

Properties: Thread type x nominal diameter: M8 Outer diameter: 11 mm Length: 30 mm Material: Steel Surface: Galvanised Property class: 4

Properties: Permitted tensile force LC in the strapping: 10000 daN Recommended tensile load: 5000 daN Shape of the hook: Double pointed hook Pre-load: 480 daN Length: 4 m Width: 75 mm Colour: Red Hand force with ratchet: 50 daN Material: PES - Polyester Norms: EN 12195-2 Min.max. temperature conditions: -40 to 100 °C

Properties: Permitted tensile force LC in the strapping: 500 daN Recommended tensile load: 250 daN Length: 6 m Width: 25 mm Colour: Red Norms: EN 12195-2

Properties: Permitted tensile force LC in the strapping: 500 daN Width: 25 mm Norms: EN 12195-2