Cable Tester Dealers

Bestnet carries a line of Network LAN tester provide you with an economical way to test Cables & Networks. These Ethernet Testers are specially designed to test the full range of the ever-expanding Ethernet, Lan Data and cable configurations. These ethernet Lan Testers is a must for anyone in the cabling industry.    Functions : » Can test correspondingly double-twisted cables1, 2, 3, 4, 5, 6, 7, 8 and G, meanwhile, can judge wrong connection, short circuit and open circuit. NS-468B tests BNC, RJH and RJ45; NS-468 tests RJ11 and RJ45; NS-468N tests RJ45 and BNC; ST-248 tests RJ45 and BNC      Test of double-twisted cables : » Switch on the power. (S is slow automatic grade, M is manual.) Put cables into both main tester and remote tester. The lights of the main tester will turn on sequentially from 1 to G.      Main Tester : » 1-2-3-4-5-6-7-8-G       Remote Tester : » 1-2-3-4-5-6-7-8-G RJ45 » 1-2-3-4-5-6-------- RJ12 » -2-3-4-5------------ RJ11      Following are erroneous connections : » If one cable, for example, cable No. 3 is open circuited, the two No. 3 lights of the main tester and remote tester will not turn on. » If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on. » If two ends of the cable is disordered, for example No. 2 and No. 4, then displays on:Main Tester : 1-2-3-4-5-6-7-8-GRemote Tester : 1-2-3-4-5-6-7-8-G » If two cables are short circuited neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding lights is on.   If test patch panels or wall plate outlets, two cables which can match each other (eg 110P4 and RJ45) will be connected to the tester. If test cables of the same axes, BNC turns on when the cable works.    

The Presto Melt Flow Index Tester - NXG Model is a reliable instrument used for evaluating and analyzing the flow properties of molten plastics or resins. The determination of the melt flow index of plastic materials is an important parameter in the evaluation of its quality.

High Voltage Tester HVT-7050 perform DC high-voltage testing of power cables (IEC 60502-2) up to 70 kV, power cables accessories (IEC 61442) as well as AC high-voltage testing, up to 50 kV at 50 Hz, of switchgear, reclosers, dielectric insulators, highvoltage dischargers (arresters), busbars and other dielectric materials with relatively low electric capacitance.

NAUGRALABS LABORATORY PRODUCT NAME: PLIABILITY TESTER FOR CABLES FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-104005 Description and Specification for Lab Tenders Pliability Tester For Cables For Testing Lab Workshop. Pliability Tester For Cables - For Testing Lab Pliability of Cables is determined by determining the force exerted by the cable specimen at a specified distance while bending to a specified degree or determining the degree of bend for exerting a specified force at a specified distance.   The  Pliability Tester for Cables consists of digital balance fitted on a rigid base. One end of the cable under test is held in a rotating grip, while the other end is resting on a wedge on the balance at a distance of 76.2 mm (3”) from the rotating grip pivot. A pointer is attached to the grip and angle of movement of grip is indicated on a circular scale. civil lab equipments manufacturers

We are the well-known Importer and Supplier of Test Equipment. We source these Test Equipment from industry�s trusted manufacturers. Our state of the art Test Equipment are in compliance of stringent quality norms, thus in huge demand worldwide. These Test Equipment are exclusively made for precision measuring and obtaining accurate results.

» 1 to 1,000 MHz frequency range. Certifies twisted pair to all approved ISO and TIA standards, including ISO Class F. » Exceeds Level III and proposed Level IV accuracy specifications. » Improved result reporting displays all data in easy to read summary, detailed and graphical formats. » Powerful diagnostics locate link disturbances on each pair, displaying the size and distance to the disturbances in a straightforward manner, speeding link failure recovery. » Unique “connector-less” recessed copper and fiber optic adapters eliminate virtually all potential adapter or tester damage…keeping your SCT on the job. » Powerful SQL based certification management software allows quick organization, editing, viewing, printing, saving or archiving test results by job site, customer, campus building and more.

Transmitter & receiver Included. To identify & trace up to 16 cables.It can also be connected to heat and water supplying 　installation system. Digital display on the receiver indicates the relative cable.

Features: The model AMS-1070M measures an increase in DC resistance due to deterioration of the secondary cable or Kickless Cable and also detects an abnormality in the secondary circuit caused by insufficient bolting or oxidizing of the contact surface. 

Whether you have a few or a mountain of cables, it pays to know which ones are good and which ones need to be tossed into the not so good pile. The MTEST-1 is an incredibly handy tool that can out the cables that may have seen too much action.

Scans for continuity, open, short as well as reversal and crossed wiring. Features with Auto or Manual scans for pin-out indicators. Built-in tone generator for cable tracing & identification. The remote terminator can be used to test the existing cable installations. Patch panel and wall plates can also be easily tested with the RJ45 adapter cable. RJ45 to BNC adapters allows for testing & tracing of BNC cables. Battery low indicator prevents misreading results.

The base unit of the cable tester can be connected via a network cable directly to a hub or switch to test wire connections, or to a network card to test the send receive pairs of wires, it can test if there is any open or miss-wire without the remote kit. 9 Led's to show you exactly which wire is open or miss-wire on both remote and master unit. Network Cable Tester can judge wrong connection, short circuit adm open circuit Build in power switch for power saving RJ45 Network Cable Tester test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and Ground 9 LED lights to indicate wiring connection on both remote and master unit Auto scanning function for rapid testing