Electronic Switches Dealers

Magnetic pickups (MPUs) are speed sensors that detect the speed of a prime mover, typically an engine or turbine. They are the communication link between your engine and a Woodward electronic governor control. The MPU is installed next to a drive shaft gear made of a material that reacts to a magnetic field. As each gear tooth passes the MPU, the gear interrupts the MPU's magnetic field, and an alternating voltage is developed. The frequency of this voltage is translated by the speed control into a signal that accurately depicts the speed of the prime mover. Woodward’s magnetic pickups can be used with most electronic speed controls. Models are available for hazardous location installation.

This is Universal model built with Micro-controller technology. This model has site programming facilities to alter essential parameters to suit application requirements. It is housed in IP-30 DIN-Rail plastic enclosure suitable for indoor panel mounting.

ECAM-21 unit has in built 16 digital inputs and 16 digital outputs. It can be used as press controller for C type presses having following features: Display of crank angle and crank position Display Stroke counter Clutch control. Maintains the top stop at variable SPMs Lubrication control Inch/Once/Continuous modes Anti repeat, two hand safety, top stop function Stroke counter, batch counter Angle dependent outputs. Salient Features: 15 outputs with on & off angle programming Each output can be set ON twice in one rotation Each output can be programmed as timed output Resolver interface suitable upto 1000SPM. Absolute position offers high level of safety Activation of outputs after programmed no. of revolutions

We are a Manufacturer, Supplier and Exporter of Carburetor Electronic Switch. Carburetor Electronic Switch is configured with advanced components for efficient performance. Carburetor Electronic Switch is greatly demanded for its dependability and durability. We have made Carburetor Electronic Switch available in different specifications to meet diverse demands of the customers.

Electronic switch that can be switched ON or OFF by lightly pushing the appropriate button on the front of the unit. The LED on the front indicates the status of the switch and power supply where a) Blue light signifies OFF, b) Green indicates ON and c) No light indicates No Power Supply.

This switch is designed and developed in-house. In order to switch capacitor banks in Manual mode, it is necessary to wire up the panels with multiple auxiliary contactors, push-buttons, indicating lamps, timers, etc. The functionality of all the sundry switchgear is built into this electronic module. The required controlled wiring is reduced to 1/10th of what is required with conventional wiring set-up. Feedback indications are provided with LEDs on the Electronic Manual Switch to confirm the capacitor step status (ON or OFF). Different versions of this electronic manual switch are available, incorporating fault annunciations, and setting features.