Ethernet Device Dealers

we are offering mikrotik router board 5shpn. the new 5ghz router board metal, completely waterproof, rugged, and super high powered. this is a serious outdoor wireless device. fully sealed, industrial design metal case, powered by router board and routeros. 1.3 watt of output power at 5ghz - to reach the last mile, in any conditions. it has a built-in n-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. led signal indicators make it easy to install and align. shipped complete with power injector, adapter and mounting kit. 24vdc power supply with poe injector included.

PoE with High Power, Security, Stability and Easy Installation Features As the applications of Power over Ethernet have expanded to home users from the IT industry. PLANET has developed a new Single-Port PoE+ Injector which meets the requirements of both the IT industry and home users for high wattage output and easy installation, respectively.   The POE-163 is a wall-mountable, single-port Gigabit 802.3at PoE+ injector with internal power supply in compact housing. Carrying both Ethernet data and power simultaneously, the POE-163 helps users to utilize just one Ethernet cable to easily install and deploy IP camera, wireless AP or VoIP phone networking in environments where power outlet is hard to find.   Interface 2-port RJ45 interfaces - 1-port Data + Power output - 1-port Data input 1 AC 100-240V input power socket   Power over Ethernet 1-port Gigabit High Power over Ethernet Mid-span PSE IEEE 802.3at Power over Ethernet Plus compliant Backward compatible with IEEE 802.3af Power over Ethernet Supports PoE Power up to 30 watts for PoE port Up to 1 IEEE 802.3at device powered Provides DC 50-54V power over RJ45 Ethernet cable to device with Ethernet port Auto-detection of PoE IEEE 802.3at/af equipment and devices that could be damaged by incorrect installation Remote power feeding up to 100m   Hardware All-in-one design with internal power supply Compact-size plastic case LED indicators for Power LED and Active LED (PoE ready-in-use)   https://www.planet.com.tw/en/product/poe-163

We are offering poe ethernet extender with power feeding. Eoc-101-p poe ethernet extender with power feeding (coaxial cable) description output power and bandwidth efficiency (based on rg-6) features long transmission distance up to 1500 meters (max.) remote power feeding simultaneous transmission of power and ethernet data over coaxial cable high transmission bandwidth, support hd ip camera 1080p30fps high power transmission for long distance: 12w (dc12v 1a)@1000 meters (eoc-101l-p) complies with standard ieee802.3 and ieee802.3u

Perle’sEthernet IO technology (IOLAN DS IO Device Servers) enables comprehensive access and control of remote digital IO, analog IO, pulse IO, relays and temperature sensors as well as connections of remote serial equipment on any IP network. The IOLAN DS IO has the ability to monitor environmental alarms, intrusion detection, relay contact closures and equipment failure. Through remote operator or application control, opening and closing of integrated relay contacts or activation of digital output signals can be incorporated into any response of a critical event.

NP300-01-af, NP300-01-at Key Features Fully IEEE802.3af compliant With IEEE802.3at supported 10/100/1000 Mbps supported Lightning Surge Protection design Compact Design Plug & Play. No configuration required

The BlueMod+S42 is a next generation Bluetooth single mode module based on the nRF52 Nordic chipset. It is designed for smartphone connectivity and cable replacement applications with low energy consumption. The BlueMod+S42 supports the Terminal IO profile as well as most GATT based profiles through a generic GATT server.

Visonic internal GSM module supports normal GSM SIM card. You can receive calls and SMS for all the alerts and alarms on up to 8 different number. Send simple SMS commands to the panel to Arm, Disarm and to know the current status of the panel. Fits inside the control panel therefore no chance of cutting of wires to disable it.     Visonic Internal GSM Module Supports three data channels – GPRS*, GSM and SMS – for high-speed and highly-reliable reporting. Can be configured as a backup or primary reporting method. Full event reporting. Recommended for every home as a backup communication line in case of line failure or system sabotage. Supports remote programming of the security system via the IPMP Management Platform or via dial-up over the GSM data channel. Continuous monitoring of channel integrity and “signal loss” detection. Supports SIA/IP, SIA and Contact ID monitoring protocols. Support two-way voice communication. Optional external antenna is available to enhance the GSM signal reception. Works with PowerMaxPro, PowerMaxComplete and PowerMaxExpress GPRS-enabled control panels. GSM 350/4 (900/1800MHz) Available only in 433.9 MHz. Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together:

Pepperl+Fuchs’ expertise in fieldbus connectivity for both factory and process automation is built on decades of experience. With new Ethernet IO modules, Pepperl+Fuchs is expanding its product portfolio with additional interfaces to industrial fieldbus systems. The new modules offer an array of innovative features to provide users maximum flexibility and efficiency. Whether PROFINET, EtherNetIP or EtherCAT, the modules support all common Ethernet protocols, and you can easily set the desired protocol type using the rotary selector on the device. Due to this multi-protocol capability, the modules are compatible with all common PLCs. This makes them easy to integrate into existing installations, independent of the type of PLC, and reduces the number of components needed. The result is lower costs and the ability to standardize plant design.

SIM800C is a complete Quad-band GSM/GPRS solution in a LGA type which can be embedded in the customer  applications.  SIM800C support Quad-band 850/900/1800/1900MHz, it can transmit Voice, SMS and data information with low power  consumption. With tiny size of 15.8*17.8*2.4 mm, it can fit into slim and compact demands of customer design.   •GPRS class 12: max. 85.6 kbps (downlink/uplink) •PBCCH support •Coding schemes CS 1, 2, 3, 4  •PPP-stack •CSD up to 14.4 kbps •USSD •Non transparent mode Specifications for SMS via GSM/GPRS •Point to point MO and MT •SMS cell broadcast  •Text and PDU mode     •Quad-band 850/900/1800/1900MHz •GPRS multi-slot class 12/10 •GPRS mobile station class B •Compliant to GSM phase 2/2+ – Class 4 (2 W @ 850/900 MHz) – Class 1 (1 W @ 1800/1900MHz) •FM: 76~109MHz worldwide bands with 50KHz  tuning step •Dimensions: 15.8*17.8*2.4 mm •Weight: 1.35g •Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) •Supply voltage range 3.4 ~ 4.4V •Low power consumption   •Operation temperature:-40°C~85°C