Fuel System Dealers

Powertech has created a fuel sensor (FMS), which digitally senses the fuel level as the level increases or decreases. Its accuracy level is high due to change in fuel level causes change in count of sensor. These counters are enclosed in noncorrosive pole and they are dipped in the Diesel tank. Noncorrosive pole helps in weather proofing, prevents the wearandtear of sensor. Due to temperature inside Diesel tank is lower than outer area, the performance of sensor become double fold. Sensor’s shape makes it easier to mount. Its different design helps in reducing human error and attempt of tempering reduces as well. Mounting seal assist in reorganization any attempt of damaging the sensor or theft. Inbuilt regulate power supply will provide the constant power supply to system, which minimize the chances of fluctuation in reading. Fuel level sensor enables us to avoid situation like Site being down due to DG couldn’t run! Fuel was low! With Continuous Fuel level sensing, you will have enough time to refill and avoid being in that type of putdown condition. Fuel consumption can be monitored with its change in level with DG run, Also the fuel theft can be stopped at some extend. With Fuel level monitoring you will have proper accounting of fuel refill, fuel consumption and DG set performance. You will also have got to know about that extra amount of Fuel getting disappear everyday without any accounting! The Benefits ¾ Timely Information of Top up & drain ¾ Daily fuel consumption analysis ¾ Fuel theft can be ceased ¾ It also helps to avoid situations like site down due to low fuel in DG.

Boiler Construction is Three Pass Fully Wet Back Type. Designed with proper grate area and furnace volume for efficient burning of solid fuels. Proper Furnace Volume is provided For Liquid and Gaseous Fuels for better Combustion Efficiencies.. Higher boiler efficiencies as designed properly with required heating surface areas based on Fuel Type. Available for liquid fuels like LDO/HSD/FO/LSHS, Gaseous fuels like Natural Gas/LPG/Biogas and Solid Fuels like Bagasse, Husk, Wood, Coal and other Agro-Wastes. Consistent and trouble free performance under ‘Normal Operating Conditions’. Capacities from 1,00,000 kcal/hr to 100,00,000 kcal/hr with Maximum Water Temperatures of 230 deg.C.

Cummins has been designing and manufacturing fuel systems since the 1930s. In India, Cummins Fuel Systems (CFS) began its operations in 2011 through its technical center and is responsible for the design, development, test and support of new, existing and remanufactured fuel system products. Cummins Fuel System products enable precise injection of highly pressurized fuel for efficient combustion in mid-range, heavy duty and high horsepower engine markets. They also enable our customers to meet increasingly stringent emission requirements while maximizing fuel-economy and performance. CFS is a pioneer in the field with many firsts in technology like the 2600 bar common rail-fuel system.

Vehicle tracking systems are popular in consumer vehicles for security, theft prevention, monitoring and as a retrieval device. Hands free monitoring that provides critical and geo fencing alerts along with panic button for emergency situation provides you a secure feeling when your family and children are chauffeur driven.

Automating compliance while optimizing operations. Problem solved. Veeder-Root is the most experienced provider of fuel tank monitoring systems in the world. We do more than just automate your compliance and fuel monitoring; we protect your business investment. We’ll help you assess your total operations. Then we’ll tailor a tank monitoring system that provides timely access to the information you need to prevent losses to your product, your profits, and your reputation. Because Veeder-Root is the world’s number-one supplier of automated tank gauges, there’s virtually no problem we haven’t solved, no advantage we haven’t engineered.

We are based in Noida(India) and ensure to make available the entire range of products to any required destination. Packaging of products is as important as designing and manufacturing, and we have upgraded machines, assistance of our packaging experts to meet the standard as well as tailored packing needs of the clientele.

Fuel Handling Systems are designed for receiving, storing and utilizing different types of Fuels Biomass, Coal, Lignite and Bagasse. Our Company is a prominent Importer, Supplier and Exporter of Fuel Handling Systems from Delhi. These Fuel Handling Systems are used in sugar, co-generation plants, and thermal power plants. To ensure that our Fuel Handling System reaches to the client safely, we provide it in excellent packaging to the clients.Details : Product Name : Fuel Handling System for Boilers  Capacity : 10 TPH to 500 TPH

DIFMACS is designed using Micro Controller to monitor fuel levels in real-time. It interfaces with Level sensor through 4-20mA signal and compute the fuel level accurately. The system can also be programmed for tanks of various shapes and profiles. The tank profile information can be programmed through the keyboard interface provided on the console. It communicates the measured values in litres to external devices through the built-in communication port. This facilitates remote monitoring of Fuel levels from a central site. The built-in 7segment LED display assists is monitoring the fuel level locally. The system is designed in with 3 relay outputs for alarm indication for High Medium Low fuel levels.Built-in key pad for programming tank profiles after password validation.

The Apsis Remote Fuel Monitoring System (ARFMS) provides real-time monitoring and management of monitoring Diesel/Petrol in Vehicle Fuel Tank,Mobile Tankers Ferrying Fuel Oil and Power Generator Sets providing alerts and notifications,and offers easy-to-use vehicle and DG real time information.The Apsis Remote Fuel Monitoring System (ARFMS) provides reliable, real time cost-effective, fuel consumption monitoring and management. Combining GSM/GPRS wireless communication with an easy-to-use web-based management application, the Apsis Remote Fuel Monitoring System (ARFMS) ensures constant, on-demand access to Fuel present / consumed information at any time, from any place.    

The TraceTek® Leak Detection and Locating System was developed by the international material science manufacturing company Raychem in the early 1980s and Raychem products are in use in tens of thousands of leak detection applications worldwide.The key is quick detection and accurate location at the source of the leak. TraceTek sensor cable and monitoring systems let you do that, because if offers you: Reliable and accurate fl uid leak detection systems for pipelines, tanks, wharfs and airports, pumps and valves. 

This system is suitable to control the fuel (diesel) temperature within the range of +40 oC to +45 oC (6 oC higher than cooling tower water temperature) throughout the test, at the engine inlet. For lower temperature range chiller is provided. Fuel from the in-cell tank is passed through a heat exchanger, which is made of SS sheet metal.  The water controlled at specific desired temperature is used to remove heat from fuel flowing through the heat exchanger. It is observed that the temperature of fuel is maintained with ± 1 oC. The system comprises:Digital Temperature Indicating Controller For HeaterA heaterBosch Fuel PumpAir Separator A sight flow indicator is provided in the fuel circuit for visual flow indication. Following Auto functions are provided: Auto priming module for fuel Auto venting valve with interlock Auto fuel draining (Suction type)

PESCO BEAM Bio-diesel Systems are the most complete systems in the market today. Our Bio-diesel Systems include all the process modules to deal with a wide variety of feedstock, including yellow grease, canola oil, soy oil, palm oil and also animal fats. Our systems are designed to efficiently convert these fats and oils into bio-diesel, obtaining better than 98% conversion. Our Biodiesel Systems include all the needed modules to recover valuable by-products such as methanol and glycerin. The systems are continuous and computer controlled. We guarantee that our systems will produce products which will meet ASTM, EU, and Turkish Standards.

With the rapid change on Road Transport industry, the volume of vehicles is expanding in the quick pace. In this manner is the requirement for operations administration of fleet and counteractive action of Fuel burglaries, as the fuel emerges to be the costliest segment of the transport business.

Our Automotive Fuel Management System is precisely designed to perfection under strict quality control. Fuel Management System offered by us helps control the fuel consumption in varied usage conditions.

We are engaged in offering Bag House in variety of sizes and type to suit site constraint. Depending on size, unit is shipped fully assembled or in modular PID PLC based control Panel form for quick and easy field erection and low field labor cost.

Fuel handling systems from Off-loading Pump sets to final Delivery Pumps and ElectricSteam heater sets are readily available with SSE&S . In addition to design advantages, SSE&S use only those components that measure up to SSE&S high engineering standards.