Tilting Table Dealers

Aditron Lifting Cum Tilting Table for Light Heavy Duty Industrial Service and Maintenance works with Capacities from 200 kgs. to 10000 kgs. with Double Acting High Pressure Hydraulic Pump with Release Valve and Replaceable Oil Seals. Multi-Scissor Mechanism, Motorised Power Packs with Customised Controls for Manual, Semi Automatic or Fully Automatic Operations made to Order - Applications.

Heavy duty cast iron construction Machined T -slots Indexed accurately Table surface accurately ground Setting is locked by two screws Graduated in degrees for setting purpose

Features : Special design for angle setting on various machine tools. Low profile for larger working space. The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts. Can be adjusted by 45 degree on both right-hand and left- hand side. The angle marking are accurate and easy to read. Application : Useful accessory for setting work at an angle for milling or other operations. Construction : Cast Iron Stress Relieved Tilting Table. Finish : Hammer tone mid grey.

In a Deep Tilting Rotary Tables the Swing Diameter is larger as compared to the Turn Table Diameter to accommodate larger diameter component on to a smaller table. Features Hydraulic Clamping Pre-Loaded Axial Radial Roller Bearing High Grade C I Construction Dual Lead Worm Gear set  

Manual Tilt Table having comes with Three Wide Straps to hold the patient.Range of Tilt is Calibrated from 0 to 90 Degree.Table Size : 24" X 78" X 32"The table is fitted with Tubular Frame and Four wheels 4". Features: Easy to operate Easy to carry Fine quality

TILT TABLE MOTORIZED : Owing to our wealthy trade expertise and information, we've got been engaged in providing an impressive quality vary of Tilt Table motored. This product is meant and made in conformity with set quality set standards with the help of progressive technology. Also, this product is exactly tested on variety of quality parameters to make sure well end. We provide this product at market leading worth to our revered customers.

  Tilting table with payload of up to 25t. Specific for MINIDREL S and B series. Optional installation of pushers.

special design for angle setting on various machine tools.* low profile for larger working space.* the table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts.* can be adjusted by 45 degree on both right-hand and left-hand side.* the angle marking are accurate and easy to read. .

We are engaged in the manufacturing of well constructed Tilting Tables. The Tilting Tables are highly appreciated in the market and there has been consistent increase in their demand. Assuring high performance and durability, our Tilting Tables can be availed at market leading prices from us. Tilting Tables can be availed from us in various sizes as per the size of the Radial Drilling Machines. Description Two working sides of the table have a number of T-slots Table top can be tilted in any angle from 0-90 degree Raw Materials Pig Iron Steel Coal Application Areas Fabrication Heavy industry Steel plants Auto industry Sizes (in mm) 1000 x 725 x 500 825 x 725 x 500 600 x 500 x 500 550 x 420 x 420

Electrically operated tilt table with foam padded top, provided with three straps to hold the patient. Heavy duty imported motor provides silent and smooth lifting action with easy to operate remote control switches. Range of electronic tilt table is adjustable between 0 to 85 degrees. The table top is 61cm wide x 198cm long x 80cm high, and is fitted on a heavy duty tubular steel frame with four locking wheels of 10 cm dia. For easy mobility. Oven baked finish. Works on 220v ac.

Product description: electrically operated tilt table with foam padded top, provided with three straps to hold the patient. Heavy duty imported motor provides silent and smooth lifting action with easy to operate remote control switches. Range of electronic tilt table is adjustable between 0 to 85 degrees. The table top is 61cm wide x 198cm long x 80cm high, and is fitted on a heavy duty tubular steel frame with four locking wheels of 10 cm dia. For easy mobility. Oven baked finish. Works on 220v ac.

Pneumatic Clamping system, with built-in patented disk-clamping design (Taiwan PAT.: 217736) to ensure cutting endurance. The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical efficiency of power transmission, high indexing accuracy and easy adjusted on the backlash. Able to be connected with CNC machine to perform synchronous 5th axis multi-angle machining. Able to be connected with CNC machine to perform tilting angle machine (4+1 axis) through Single Axis Controller. Minimum Indexing Degree: 0.001° Tilting range: +/- 110 °    

DESCRIPTION Asmit Tilt Massage Table is a premium quality professional spa massage table crafted from German Steam Beech wood, German tilt mechanism for backrest incline and other premium grade raw material like 75mm/40 density foam cushion and high grade leatherette. This table is supplied with external face cradle that is adjustable/detachable and complimentary carrying case   CUSTOMISATION AVAILABLE The leatherette color can be customised to Black, Brown, Biege, Maroon, Blue, Cream, Dark Green as per client’s choice. There is no customisation possible for change in length & width of this table.

We are Leading Manufacturer, Supplier, Dealer & Exporter Of Electric Tilt Table. Features: * Elevated frames to allow proper lifter positioning * Heavy duty motor lift up to 500 Kg * Powder coated frames that resist rusting and scratching * Remote control for up-down adjustments * Angle indicator * Three extra wide movable patient positioning straps with locking swivel casters * Removable footrest.

ERT series of Rotary Tilting Tables enables accurate and productive machining. These tables are designed so that the surface of the table top is on the center line of the tilting axis, for a greater piece part capacity, easier programming and less interference in the work zone.