Hydraulic Testing Machine Dealers

Features Load Capacities 50kN to 600kN static & dynamic Frame stiffness 1100kN/mm Up to 300 mm stroke servo hydraulic actuators with 1micron resolution Works out of 3 Ǿ 415 VAC Next generation DSP based servo controller with 32 bit data acquisition 24 kHz data acqusition & 24 kHz servo loop control Accuracy ± 0.5% of read out value for load, strain & stroke 0-100 Hz cyclic frequency operation. Frequency response depends on combination of power pack & servo valve flow rate Noiseless operation Power pack rating 11 LPM to 500 LPM Applications Tension/Compression/3 point bend Ductile and Brittle Fracture toughness (K1c, J1c, CTOD, J-R) Fatigue crack propagation (da/dN) Threshold stress intensity Low-Cycle/High-Cycle Fatigue (LCF/HCF) Elastomeric properties

NAUGRALABS LABORATORY PRODUCT NAME: SERVO HYDRAULIC UNIVERSAL TESTING MACHINE FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-111015 Description and Specification for Lab Tenders Servo Hydraulic Universal Testing Machine.  Capacity: 60T (Max upto 2000kN) Single Test Frame with dual zone to conduct Tensile, Compression and flexural test. Four column load frame with dual pressure hydraulic loading system. Four Column and two screw construction to allow for a larger, more robust testing area. Extension resolution from cross head: 1micron (0.001mm) Display of force, position & strain valves (in kg/ kN/ Lbs/ Tons) Hand held controller for indicating load elongation, speed for loading and unloading in the manual mode, for pump start/stop, return, max value, crosshead up/dowm and stop. A variable sample break function to display peak values automatically, and return the crosshead. Automatic value-Hydraulic safety values (using only Parker & Bosch valves) Automatic piston zero positioned. Control System provided with closed-load control, allowing precise control of load, strain and position rates when used with test software, driven by Vfd motor for higher torque. Load Measurement & Accuracy: Load Measurement: Pressure Transducer load weighing system (capacity 400 bars) Accuracy: ±5% of the indicated load from 0.2% to 100% of capacity. Resolution : better than 1/100,000 of capacity (0.001kN) Friction free design : no oil seal for maintenance free operation (cylinder piston lapped to 2 microns finish) Basic Testing Clearances: 450- 575mm clearance between screws  850 - 1000 mm Standard Opening  750 - 850 mm maximum clearance in tension  650 - 850 mm maximum compression clearance  135 -200mm hydraulic stroke Standard Speed Ranqes: 0 to 100mm /min testing speed  250 - 350 mm/min per minute adjustable crosshead speed Speed Resolution: 0.005 - 0.02 mm/min can be improved upto 100mm/min  Steel & Metal Mechanics Lab equipment manufacturers,exporters and Steel & Metal Mechanics Lab suppliers

We are leading Hot/Cold Baths For Hydrostatic Pipe Pressure Testing, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India.   Technical Specifications : → Capacity : 200 To 20,000 litrs → Temperature Range : Ambient to 95 °C. → Accuracy : +/- 0.5 °C. → Temperature controlling system :      Thyristorised power pack. (30% Power Saving). → MOC Inner : SS-304, Outer MS Powder coated. → Door opening : 3 Layers folding type. → Water level controlling : Auto + Safety. → Water circulation : With Heavy duty pump      (German make) → Supply : 440 VAC/50 Hz  

    Hydraulic testing machine suitable for stainless stell and carbon steel longitudinally welded tubes   Custom made design to suit requirements of water and gas tubes to Oil country tubes   Emphasis on : Material selection     Manufacturing & process selection     Dimensional & geometrical accuracy   Specially designed sealing arrangement for high pressure testing   PLC controlled Auto & Manual cycles   Quick changing type tooling for quick size change   Testing pressure range from 200 to 600 atmosphere   Heavy and rugged heads fabricated from tested carbon steel   Selection of Power pack and intensifier from most standard and dependable sources   Suitable for tube length ranging form 4 meters to 8 meters. Easy & quick length change through adjustable moving tailstock   Single or multi-head design to suit different production quantum requirements .

When it comes to payment, we offer convenient and practical methods to our clients. We undertake both online and offline payment methods which are hassle free and safe for the clients. Owing to our well-established set-up in Kolkata(India), we are capable of catering to the requirements of clients with utter ease.

This range of test systems meets practically all the requirements of metals and composites testing for strength, durability and toughness. It is backed up with a wide choice of appropriate application software, transducers and accessories that satisfy the requirements of most standard test practices applicable to such tests. These accessories include room and elevated temperature testing of metals for tension and compression properties, low and high-cycle fatigue, fracture and fatigue crack growth, testing of composites under ambient and controlled environment for shear, tension/compression and fatigue and testing of joints and fasteners for strength and durability under a wide range of loading conditions, including constant amplitude, programmed block loading and simulated service loading.Standard Features 0–100 Hz cycling frequency Hydraulic lifts and clamps 50/100/150/250/300/500/600 kN force rating 150 mm actuator stroke Adaptable to wide range of fixtures & grips Actuator on fixed bottom crosshead Electronically servo-controlled variable flow, variable pressure, low noise, energy efficient pump Up to 40kHz,32-bit digital closed loop control 32-bit data acquisition Frame stiffness 600 kN/mm User friendly MTL-Windows software with dedicated application software Provision for user to program in software Applications Fatigue crack propagation Fracture mechanics Room temperature tests Testing in corrosive environment Tension/compression/3-point bend Low/High cycle fatigue (LCF/HCF) Ductile/Brittle fracture toughness Low/High temperature tests

1.Peak load along with on line load2. Maximum elongation with online elongation3. Ultimate Tensile Strength4. Graphical Display of Load vs. Time5. Graphical Display of Elongation vs. Time6. Graphic Display of Load vs. Elongation7. Graphic Display of Stress vs. Strain8. Complete Statistical Analysis9. Data Report Management

Exceptional After-sales Services of this Hydraulic Grip Universal Testing Machine can be experienced once it is purchased from us. Also, spare parts of this Hydraulic Grip Universal Testing Machine can be purchased from us at competitive rates. This Hydraulic Grip Universal Testing Machine complies with the most stringent of standards set by IS, BS, ASTM and DIN. Details : Complete range of material testing system, Destructive testing (DT) & Non Destructive equipment (NDT)Product conforming to IS, BS, DIN and ASTM StandardsEquipment approved by NPL / NML, NABL, LLOYDS, PDIL, NTPC, BHEL, RDSO, DOI and Railways

Type of Test: Destructive Purpose:Understand behaviour of component under Radial load with constant or variable displacement/ motion in cyclic pattern Prime Mover: Servo Hydraulic Power Pack  Brief Specifications: 15 HP AC Induction Motor and Servo Hydraulic Power pack System with Two Pillar structure with micro controlled system to generate sinusoidal, Trapezoidal and square wave motion.