Galvanized Wire Mesh Dealers in Nagpur (16 products available)

We offer an extensive range of GI / Mild Steel Wire Mesh, that is manufactured using high grade mild steel, galvanized steel and stainless steel. The high grade of raw material used for the manufacture of the mesh, ensures the quality and durability of the range. The grades that we utilize vary from 15 MM TO 100 MM. We are also capable of manufacturing these as per the specifications of the clients. 

Welded wire mesh, or welded wire fabric, or "weldmesh" is an electric fusion welded prefabricated joined grid consisting of a series of parallel longitudinal wires with accurate spacing welded to cross wires at the required spacing.

We are renowned for offering a wide range of Welded Wire Mesh. Welded Wire Mesh, offered by us, is manufactured using high quality materials and is highly durable in nature. These Welded Wire Meshes are available in all opeaning and all wire thickness, We also offer G.I and S.S welded mesh . Use of high-end technology in fabrication ensures flawless quality of our Welded Wire Mesh. We make available Welded Wire Mesh in different specifications to cater to the demands of the clients. Why Our Welded Wire Mesh? good welding strengthequal opeaning throughout the lengthproper wire thicknessLong usable, lifePrecisely designedSuperior quality

• Material: SS304
• Brand Name: CWC
• Type: Welded Wire Mesh
• Wire Gauge: 2.5mm
• Weave Type: Welded
• Usage/Application: Industrial
• Material Grade: MS,GI,SS
• Thickness: 9 - 4mm
• Mesh Size: 0-10 per inch

We are the leading exporters and supplier of this products.

• Material: Galvanized Iron
• Technique: Hot Rolled
• Country of Origin: Made in India
• Wire Diameter: 5.2mm
• Hardness: 50HRC
• Tensile Strength: 360MPa

• Application: Cooler and reinforcement
• Material Grade: Ms, GI, SS
• Opening (Microns): 15MM TO 100MM
• Weight (kg): As per size
• Packing Type: 50feet Roll
• Size (mm): 15mm to 100mm
• Hole Size: 15mm to 100mm
• Rust Proof: Non Rust Proof
• Minimum Order Quantity: 40 Kilogram

Welded Wire Mesh Our range of welded wire mesh is supreme in quality, which is produced conforming to IS: 1566-1982 with long and cross wire spacing varying from 25 mm to 150 mm with 2 mm to 6 mm wire diameter. The intersections are rigidly welded and each of them has the capacity to withstand the shear stress up to 210 N\mm2 (IS: 4948-1974) on the reference area of the longitudinal wire. Our range is widely used in RCC-building construction. It gives good reinforcement solution for industrialized concrete constructions. Following are the advantages of the welded wire mesh: Higher Characteristic Design Strength: The welded wire mesh has a better characteristic strength point of view, usage of welded mesh with Fe480 grade results in savings in steel area or steel weight required to the tune of 13.55% vis-à-vis HYSD bars of Fe 415 grade and to the tune of 47.92 % vis-à-vis plain mild steel bars of Fe 250 grade. Better Bonding Behavior: The bonding capacity of welded mesh is excellent. As against the peripheral surface area which is responsible for bonding to concrete in the case of individual bars, the rigid mechanical interconnections by means of welds to cross wires are mainly responsible for stress transfer from concrete to steel and vice-versa in the case of welded mesh. Better and Economic Crack Resistance with Thinner Wires and Closer Spacing: The welds have a strong mechanical anchorage behavior at each the intersections are further responsible in imparting an immense deal of homogeneity to the R.C.C section as a whole. The two dimensional uniform stress distribution of the welded mesh with the concrete achieves better plate behavior in the slab. Further, welded mesh usage affords the possibility of using thinner wires at closer spacing. The close spacing of thinner wires and the two-way behavior of welded mesh minimizes the crack widths and preserves structural integrity of the slab. Load stresses in the residential slabs are low but where minimum thicknesses of 75 to 125mm are used from serviceability or other reliability criteria. Following are some of the specifications of our assortment: Slab Depth in mm Min steel. Reqd.@ 0.12% sq.mm/m HYSD Steel provided at 3 x eff.depth max. spacing Welded Wire Steel Welded mesh Close spacing % Savings of steel 75 90 Y8 @ 165c/c= 303mm2/m 125 xl25-4mm dia = 100mm2/m 67.00% 100 120 YS@240c/c= 209mm2/m 100xl00-4mm dia = 125mm2/m 40.00% 125 150 Y8@310c/c= 162mm2/m 100x100-4.4mm dia = 152mm2/m 6.20% Savings of Labor,Time and Binding Wire: This consumption saved works out to about 2 to 5% of the reinforcement used in terms of cost of steel saved. Besides, the added benefit is avoidance of those dangling ends of binding wire which are the starting fuses for the virus of corrosion into the reinforcement.

Welded Mesh, Galvanized Welded Wire Mesh, Chain Link Mesh, Galvanized Wire

GI Wire Mesh, solar fencing wire, razor wire, pvc chaninlink wire

Wire Netting, Wire Mesh, pvc chainlink fencing wire, Concertina Wire

crimp wire mesh, Crusher Screen Mesh, razor wire

Stay Wire, Binding Wire, Galvanized Wire, Mild Steel Wire

Color Coated Profile Sheet, Deck sheets, shutter strip

GI & MS Weld Mesh

Wire Mesh, Wire Netting