Voltage Transformers Dealers in Nagpur

ARMO CVTs are based on static, Magnetic (Ferroresonant) Principle. The input winding normally runs at very moderate levels of flux linkage. The output winding exhibits an intrinsic energy storage characteristic and this energy storageco-operates in conjunction with mains capacitors to produce self-generated AC flux fields which is indirectly excited from the input winding.This results in instantaneous voltage regulation,no transient,no spikes,sine wave output,noise less operation and high isolation between inputs and outputs.

Fixed or horizontally with drawable voltage transformer are accommodated on top of the cubical or in separate PT panel and are in 3 limb or 5 limb or 3 single phase version with ratio to suit system voltage. The PT winding are epoxy cast resin insulated and are connected to either circuit side or busbar side as desired. The voltage transformer carriage can readily be removed from the panel when required. A shutter automatically covers the fixed isola_ng contact when the voltage transformer is isolated. On the primary side of voltage transformers are provided with high resistance cartridge type fuse which can only be removed when the transformer is isolated. Secondary of HRC fuse are also accessible.

Avail from us a wide range of precision-engineered Constant Voltage Transformers that are based on the principle of static and magnetic (Ferro Resonant) principle. In order to produce self generated AC Flux field, which is indirectly excited from input winding,the output winding display an intrinsic energy storage characteristic, in addition to this, energy storage adjusts in conjunction or mains capacitor. Whereas, input winding usually runs at very moderate levels of flux inkage. Which further, results in instantaneous on tog regulation, sine wave output, high isolotion between output & input, no spikes, no transient, and noise less operation. Features: Maintenance free (no moving part) Very fast correction speed High efficiency > 87% Zero volt potentials between output neutralground Protected against overload short circuit Technical Data: Technical Specification of Constant Voltage Tranformer: Capacity 150 VA to 5 KVA Input Voltage 170V to 270V AC Frequency 50Hz+1% Phase Single Output Voltage 220230V + 1? Waveform Sinusoidal Efficiency 90% at full load Insulation Class B Response Times 10ms Correction Speed 100VSec

High Tension Transformer, Electrical Transformers, Potential Transforme

Potential Transformer, Alloy Wire Rod, Insulated Aerial Bunched Cabl

100kv Servo Voltage Transforme

Uninterrupted Power Supply, Control Panel

Voltage Transformers, AC Drive > MFDDTB3A2 (5KW), UPS, Medium Scale UP

Potential Transformer, Transformer, Power Transforme