EAST WEST ENGINEERING & ELECTRONICS PVT. LTD. Nerul, Navi Mumbai, Maharashtra

World 1st pipe & tank cover designed digital X-ray panel (Free movement from 8")Conforms to the pipe, zero distortionLight weight for the carry outWater & Dust proof ScintillatorGados Gadox Pixel size 140㎛ Pixel matrix 768 x 2,304 Imaging Area 107 mm x 322 mm Weight 2.3 kg

Material : ABS

Application : Indutrial Use

Country of Origin : 110/230

Availability : 2.5kgs

Total Carbohydrate : 1yr

Country of Origin : KORIA

Brand Name : JME

Power Source : Sealed Lead Acid 120 Volt

 truvac vacuum pump are used to generate ultimate vacuum up to 25 microns.a vacuum pump converts the mechanical input energy of a rotating shaft into pneumatic energy by evacuating the air contained within a system. the internal pressure level thus becomes lower than that of the outside atmosphere. the amount of energy produced depends on the volume evacuated and the pressure difference produced. mechanical vacuum pumps use the same pumping mechanism as air compressors, except that the unit is installed so that air is drawn from a closed volume and exhausted to the atmosphere. a major difference between a vacuum pump and other types of pumps is that the pressure driving the air into the pump is below atmospheric and becomes vanishingly small at higher vacuum levels

Number Of Flower : Mechanical Vacuum Pump

Application : Generate Ultimate Vacuum Up To 25 Microns

vacuum box is used for checking leaks on tank bottom surface. vacuum box is used to check for any leaks or faults in the welding of bottom and annular plates of the tank. it is a container made of acrylic sheet with an inlet valve connecting to the vacuum pump. the vacuum pump attached creates a vacuum in the vacuum box, which shows bubbles on the soap water applied on the weld incase of any leaks or weld defects. it is one of the most adaptive method to test for any defects or leaks in the bottom and as efficient as radiography is for shell weld tests ndt inspection by – vacuum box (bubble) test 1. vacuum box bubble test is one of the safest and reliable non-destructive test method. 2. the vacuum box bubble test can locate leaks in the test area that cannot be directly pressurized. 3. the test is performed by applying a detergent solution on the test area and creating a vacuum around the test surface by external mechanism e.g. vacuum box. 4. the detergent solution will bubble if there is any leakage through the test area. 5. your person should be trained and experienced in vacuum box bubble test method in accordance with asme v, appendix ii. 6. confirm to standard of measurement as per 1. api-650 (latest edition) 7.3.4 & 8.6 eleventh edition 2. asme sec-v

Material : Acrylic Sheet

Number Of Flower : Container

Application : Indsustrial Usage

Availability : 400-500g

Display Type : Digital

Automatic Grade : Automatic

Body Material : Cast Iron, Plastic

Power Source : Battery

Total Carbohydrate : 1Year

Cygnus has developed digital multiple echo technology to obtain accurate thickness measurements through coatings and corrosion.Cygnus manufacture and supply ultrasonic thickness gauges which are employed in almost every industrial application around the world.

Material : Steel

Certification : ISI Certified

Feature : Easy To Fit, Perfect Strength

Automatic Grade : Automatic

Display : Digital

Measuring Range : 100-200mm

Gauge Size : 2inch, 4inch

Gauge Diameter : 40-60mm

Designed for the harshest of environments, with a simple to use keypad, intuitive menus and a colour LCD display which can be viewed in all lighting conditions.  The twin shot injection moulded enclosure has a soft but durable TPE outer skin which is comfortable to hold and protects against bumps while the hard internal shell offers maximum strength and environmental protection certified to the demanding US MIL STD 810G standard.  The unit still relies on Multiple-Echo to provide simple and accurate measurements, with the added benefit of Echo-Echo and Single-Echo using twin crystal probes for extreme corrosion. Echo-Echo for measurements on painted metals but with heavy back wall corrosion / pitting and Single-Echo for measurements on uncoated surfaces with heavy front face and/or back-wall corrosion and attenuative materials such as cast metals or plastics / composites.   

Number Of Flower : Ultrasonic Thickness Gauge, Thickness Guage

Material : Alloy Steel, Iron, Stainless Steel, Steel

Shape : Rectagular

Certification : ISI Certified

Feature : Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Robust Construction, Rust Proof

Condition : New

Automatic Grade : Automatic, Manual

Country of Origin : United Kingdom

Display : Digital

Measuring Range : 100-200mm, 200-300mm

Brand Name : CYGNUS

Range : 0.8 Mm To 250 Mm

Thermocouple wires k type: 22 gauge-fibre insulated 10/12/14/16 gauge bare   Hand held digital thermometer : or quick checking of temperature (0-1200ºc)   Infra red non contact thermometer : Range (0-2000ºc)

Material : Plastic, Stainless Steel

Length : 4mtr

Feature : Durable, High Strength

Power Source : Electric

Tenmperature : 100-200 Deg C

Country of Origin : 220-240 V

Frequency : 50 Hz

Packaging Type : Box

Total Carbohydrate : 1 Year

Material : Stainless Steel

Pattern : Plain

Finishing : Polished

Number Of Flower : 3 in One

Shape : Rectangular

Feature : Anti Corrosive, Durable

Finishing : Polished

Total Carbohydrate : 1year

Warning Blinker Light with siren Volume Control. Built in Radiation Detector for Radiation. Automatically Switches on – when Radiation intensity exceeds 5mR/Hr. Small In Size Easy to Use The Flashing light and Siren will automatically switch on when the radiation level exceed the pre-set level set at the factory.  The preset limit set at the factory is 5 mR. It can be changed as per your requirement. Works on - 230 V mains. Also works on Built in Battery. Charging unit built in the system.

Number Of Flower : Radiation Detector

Packaging Type : Multicolor

Application : Detecting Radiation Levels

Power Source : 230V Mains And Built-in Battery

RADAX SDM 5000D is a Digital Handheld Radiation Survey meter to detect Gamma and Xray radiation. It also works as a Dosimeter by accumulating dose received by it or theoperator carrying it.   RADAX SDM 5000D uses a Geiger-Mueller (GM) detector tube to detect radiation. The GM tube contains ionization gas which generates pulse of electrical current when radiations pass through the gas and causes ionization. These electrical pulses are countedelectronically. The Dose received is in milli-roentgens. The Dosimeter continuous toaccumulate Radiation dose till it is switched off. The last reading remains in memory evenwhen the power is switched off. On switching on once again, the Dosimeter starts counting from the last reading. If required, the dose can be cleared off from memory with help of function switch.   There are only two set of switches-one is Power On-off & Enter and the other is Setting Switch (S). The display consists of two lines, First line for Survey meter mode and showsradiation in mR/Hr. The second like displays the accumulated dose in mR.   Kit Contains SDM 5000 Survey cum Dose Meter Carry Case Carry Belt Pouch Operation Manual

Display : Digital LCD 2 Line Display

Availability : 153 gm

RADAX DM-5000 Digital  Dose Meter Range: 0-5000 mR- 50,000 µSv

Availability : 100-150 Gm

Condition : New

Display : LCD

Country of Origin : India

Material : Pvc

Shape : Rectangular, Round, Square

Packaging Type : Multicolor

Feature : Anti-Counterfeit, Durable

Pattern : Printed

Sticker Type : Hologram Stickers

Number Of Flower : Portable X-ray Machines

Application : Radiography

Availability : 50-100kg

Country of Origin : 220V

Automatic Grade : Automatic

Power : 1-3kw

Driven Type : Electric

Total Carbohydrate : 1yrs

Certfication : CE Certified

Number Of Flower : Prod Type

Material : PVC

Feature : Light Weight, Waterproof

Power Source : Battery

Total Carbohydrate : 1year

One significant feature of BL-100 is that– it has a built-in, quiet-operating fan located at the rear of the lamp housing. The advantage of this design feature is obvious – dramatically reduced running temperature. In practical terms, the fan-cooled BL-100 means more comfort and safety for operators plus longer bulb life. As the  black lights are often hand-held during fluorescent inspections, the heat they create is an important consideration. The typical running temperature of the BL -100F is less than 30 degrees Celcius , so it does not significantly raise the ambient temperature around the operator, nor is it a safety concern. Polycarbonite bezel allows air to cool lens in the rest position, and helps keep operators’ hands away from lens glass during use Cord-through-handle design reduces operator fatigue, improves balance and provides greater safetyFiberglass-reinforced handle always stays coolTough aluminum housing withstands rugged useRecessed lens protects lens and bulb from damage Features Compact Black Light unit, fitted with High Intensity Mercury Vapour Lamp having built-in Reflector. Light weight aluminium lamp body. High quality UV filter- filters unnecessary radiation and white light. Cooling fan provided for the UV lamp for long operation. Fibre-glass heat-proof handle. Heavy duty ballast for continuous operation. CS carry case duly powder coated for safe keep and transportation. Technical Specifications for BL-100 Fault Protection UV Intensity meets industry and military standards:4500 

Length : 100-150mm

Packaging Type : Carton Box

Display Size : 2 Inch 2.5 Inch

Height : 100-150mm

Usage : Hardness Testing

Dimension (WxDxH) : 252x627x781mm

Material : Mild Steel

direct-reading dosimeter - w138, 0-200mr with sapphire window   manufacturer: arrow-tech, inc. general details. the direct-reading dosimeters are rugged, precision instruments. they are designed to measure and directly read, at any time accumulated dose of gamma and x-ray radiation exposure. the direct-reading dosimeter is designed to satisfy military specifications for the im-series radiac meter and ansi n13.5 and n322 requirements. the sturdy metal clip attaches the dosimeter to a pocket or any object to monitor total radiation exposure. they are hermetically-sealed and immersion proof.   key features- the direct-reading dosimeter is a pocket-size, carbon-fiber electroscope with an ion chamber for detecting and indication of integrated exposure to gamma and x-ray radiation. it has a thin wall which permits the penetration and detection of radiation.  this model comes with a hardened sapphire window that won't scratch even in the toughest of conditions. dosimeters are extremely sensitive instruments. although they are constructed for rugged use, they should receive the same care as a wristwatch. since dosimeters are hermetically sealed at the factory, they cannot be repaired or adjusted in the field. therefore, if instrument malfunctioning is experienced, the instrument should be returned to the factory or your dealer. dosimeters may be maintained in operating condition simply by cleaning the eyepiece lens and the charging switch insulator with clean water and a cloth that is free of lint and grit. make sure the charging switch insulator is absolutely free of lint and moisture at all times. caution: do not insert any sharp objects into, or tamper with parts in the charging switch recess. irreparable damage may be done.

Number Of Flower : Direct-reading Dosimeter

Material : Carbon-fiber, Sapphire Window

Size : Pocket-size

Feature : Ion Chamber, Rugged Design, Hermetically-sealed, Immersion Proof

Application : Measure And Directly Read Accumulated Dose Of Gamma And X-ray Radiation Exposure

No electrical supply required… Permanent Magnet Yokes are a great convenience in Magnetic Particle Inspection, due to their complete portability, as no electricity is required. Lifting capacity at 100mm pole distance 50 Pounds (23 Kg). The specially shaped pole pieces permit easy removal of the pole pieces from the component The PMY Yoke is a portable permanent magnet Yoke which is ideal for magnetizing components for crack detection, Consists of hinged arms to allow a wide variety of profiles to be magnetized. Salient Features Light weight, Economical, Versatility and powerful performance Safe and secured for operators Easy to Use Powerful magnets with rotating head. Suitable for continuous inspection Strong and rugged construction Truly Portable PMY Yoke comply with ASTM E709 & ASME Section V Article 7.

Availability :   2.2 Kg

All tanks are made of SS316 Corrosion resistant Stainless Steel sheet of thickness 1.0 mm [19 SWG] and joints made by TIG welding process