ApplicationTorquing And Un-torquing Heavy Duty Bolts And Nuts
Operating Pressure90 Psi (6 Bar)
Reaction Arm PositioningExternal Splined Housing
Hook AttachmentPocket For Hook Attachment
Pneumatic Torque wrenches are the preferred torquing method to achieve productivity with less man-power. POWERMASTER Pneumatic torque wrenches offer the reliable and dependable solution for the torquing and un-torquing of heavy duty bolts and nuts at various industries where speed, power, accuracy and safety are required. Maximum operating pressure is 90 psi (6 bar).
External splined housing for accurate reaction arm positioning.
Gearbox made of Hardened alloy steel gears for reliable and accurate operation.
Pocket for hook attachment for suspending the wrench.
High speed thrust bearing for smooth operation under load.
Heavy duty, trouble free, rugged and reliable air motor for smooth operation.
Forward /Reverse lever for operating the machine in clockwise/anticlockwise direction.
Downward blow-out for safe air exit
Pneumatic Torque wrenches are the preferred torquing method to achieve productivity with less man-power. POWERMASTER Pneumatic torque wrenches offer the reliable and dependable solution for the torquing and un-torquing of heavy duty bolts and nuts at various industries where speed, power, accuracy and safety are required. Maximum operating pressure is 90 psi (6 bar).
External splined housing for accurate reaction arm positioning.
Gearbox made of Hardened alloy steel gears for reliable and accurate operation.
Pocket for hook attachment for suspending the wrench.
High speed thrust bearing for smooth operation under load.
Heavy duty, trouble free, rugged and reliable air motor for smooth operation.
Forward /Reverse lever for operating the machine in clockwise/anticlockwise direction.
Downward blow-out for safe air exit
Application : Torquing And Un-torquing Heavy Duty Bolts And Nuts
Electric Tube Cleaners with Variable Frequency Drive (VFD), facilitates control over speed of motor by varying the frequency as per our requirement. Adjustable speed drive in electro-mechanical drive system to control AC motor speed and torque by varying motor input frequency. Variable frequency drive used in a drive system have three main sub systems - AC motor, main drive controller assembly and drive operator interface.
Electric Tube Cleaners with Variable Frequency Drive (VFD), facilitates control over speed of motor by varying the frequency as per our requirement. Adjustable speed drive in electro-mechanical drive system to control AC motor speed and torque by varying motor input frequency. Variable frequency drive used in a drive system have three main sub systems - AC motor, main drive controller assembly and drive operator interface.
A simple test instrument used by manufacturers and used to identify leaky tubes in condensers, heat exchangers and other tubular apparatus.
The Vacuum Tube Leak Tester PVLD-3000 is a simple and precise tool used for testing tubes of boilers, condensers and heat exchangers. It is the fastest and most accurate method of locating leaky tubes for plugging or replacement or installation of new tubes.
It works on the principle of vacuum in which the tool sucks the air from the tube and creates a vacuum to a desired reading on gauge.
Steady reading on gauge indicates NO LEAK.
If the reading on the gauge drops it indicates a tube with a LEAK.
A simple test instrument used by manufacturers and used to identify leaky tubes in condensers, heat exchangers and other tubular apparatus.
The Vacuum Tube Leak Tester PVLD-3000 is a simple and precise tool used for testing tubes of boilers, condensers and heat exchangers. It is the fastest and most accurate method of locating leaky tubes for plugging or replacement or installation of new tubes.
It works on the principle of vacuum in which the tool sucks the air from the tube and creates a vacuum to a desired reading on gauge.
Steady reading on gauge indicates NO LEAK.
If the reading on the gauge drops it indicates a tube with a LEAK.
Used to ‘thin’ the walls of heavy gauge tubes as a step in their tube removal tools from tube sheet.
Suffix model number with tube gauge when ordering. Example for 3/4”O.D. 16G, model number will be WR-750-16.
Wall reducers available for mm tube sizes also. Please enquire.
Wall reducers are suited for tube sheets up to 5” thick. Longer reaches are available.
Used to ‘thin’ the walls of heavy gauge tubes as a step in their tube removal tools from tube sheet.
Suffix model number with tube gauge when ordering. Example for 3/4”O.D. 16G, model number will be WR-750-16.
Wall reducers available for mm tube sizes also. Please enquire.
Wall reducers are suited for tube sheets up to 5” thick. Longer reaches are available.
Air Supply Pressure70 Psi To 100 Psi (4.7 To 6.8 Bar)
Simple, Quick and Reliable tube joint testing. Test 10 tube joints per minute.
Interchangeable seal sets : Allows testing of tube joints from 7.75 mm to 30.63 mm ID with easy to replace accessories.
Joint Testing Gun weights less than 1.5 kg.
Air supply : Uses standard plant air supplies from 70 psi to 100 psi (4.7 to 6.8 bar).
Silent during use. Ergonomic design makes testing effortless.
Each Kit packed in compact and handy case.
Simple, Quick and Reliable tube joint testing. Test 10 tube joints per minute.
Interchangeable seal sets : Allows testing of tube joints from 7.75 mm to 30.63 mm ID with easy to replace accessories.
Joint Testing Gun weights less than 1.5 kg.
Air supply : Uses standard plant air supplies from 70 psi to 100 psi (4.7 to 6.8 bar).
Silent during use. Ergonomic design makes testing effortless.
Each Kit packed in compact and handy case.
UsesHeat Exchanger And Condenser Tube Sheet Reaming
TreatmentCryogenically Treated
Sizes Available3/8
High speed steel, cryogenically treated and coated with Titanium Nitride for long life.
Ideal for heat exchanger and condenser tube sheet reaming.
Reamers available in MM sizes also.
Also available on diameters upto 4”.
Sizes Available 3/8 " O.D. TO 1.1/4 " O.D.
Models Available RM-095/66 TO RM-317/254
High speed steel, cryogenically treated and coated with Titanium Nitride for long life.
Ideal for heat exchanger and condenser tube sheet reaming.
Reamers available in MM sizes also.
Also available on diameters upto 4”.
Sizes Available 3/8 " O.D. TO 1.1/4 " O.D.
Models Available RM-095/66 TO RM-317/254
Coating : Titanium Nitride
Uses : Heat Exchanger And Condenser Tube Sheet Reaming
Compatible WithStandard Pneumatic Drill,Standard Electric Drill
To clean tube sheet bores, prior to tube installation.
Can be used with any standard pneumatic or electric drill.
Available in Carbon Steel, Stainless Steel and Brass.
Sizes Available 1/2 " O.D. TO 3 " O.D.
Models Available TSHB-1/2 TO TSHB-3
To clean tube sheet bores, prior to tube installation.
Can be used with any standard pneumatic or electric drill.
Available in Carbon Steel, Stainless Steel and Brass.
Sizes Available 1/2 " O.D. TO 3 " O.D.
Models Available TSHB-1/2 TO TSHB-3
Simple and robust operation.
Very little training for the operator needed. Set up in less than a minute.
High pressure pump for pulling toughest jobs.
Compact and lightweight gun and powerpack.
Removes tube without damage.
Low set up time / ease of operation.
Available with choice of electric / pneumatic operation.
Automatic switchover from low pressure to high pressure.
Interchangeable pulling gun accessories compatible with existing systems on the market.
Single man operation.
Simple and robust operation.
Very little training for the operator needed. Set up in less than a minute.
High pressure pump for pulling toughest jobs.
Compact and lightweight gun and powerpack.
Removes tube without damage.
Low set up time / ease of operation.
Available with choice of electric / pneumatic operation.
Automatic switchover from low pressure to high pressure.
Interchangeable pulling gun accessories compatible with existing systems on the market.
Single man operation.
Tool uses 3 Titanium Nitride coated cutting blades which can be configured for tube end facing or for weld removal as a step in the removal of welded tubes from the tube sheet.
Uses 3 Titanum Nitride Tool Bits which can be configured for tube end facing or for weld removal as a step in the removal of welded tubes from the tube sheet.
Technical Details
Sizes Available 1.1/2 " O.D. TO 4 " O.D.
Models Available FC-1500 TO FC-4000
Tool uses 3 Titanium Nitride coated cutting blades which can be configured for tube end facing or for weld removal as a step in the removal of welded tubes from the tube sheet.
Uses 3 Titanum Nitride Tool Bits which can be configured for tube end facing or for weld removal as a step in the removal of welded tubes from the tube sheet.
Technical Details
Sizes Available 1.1/2 " O.D. TO 4 " O.D.
Models Available FC-1500 TO FC-4000
TSS Series Bolt Tensioners are specially designed for sub sea applications. These Tensioners are suitable for higher pressure rating flanges also. It’s ergonomic design makes it very easy to handle and use by divers under the harsh sea conditions. These tensioners are designed to provide a wide range of flexibility, covering stud sizes 3/4” to 3.1/2” (M-20 to M-85)
High Strength Stainless Steel Construction: The Complete tool is made from high strength stainless steel for use in corrosive sea environment and to minimize maintenance.
Versatile Design: Designed to provide a wide range of flexibility, covering stud sizes 3/4” to 3.1/2” (M-20 to M-85) using just 8 load cells.
Higher Load generation: Generates higher load making it suitable for higher pressure rating flanges (API 170 - 10K)
Long Stroke And Stroke Indication: All tensioners have a 25mm long stroke with piston marked with fluorescent rings for indication of stroke and over stroke limit.
Safe Design in event of Piston ‘Over Stroke’: Designed to release high pressure hydraulic oil inwards in the event of over-stroke, thus saving the operator from any potential exposure.
Multi Tensioning: The tensioning unit cell is provisioned with two connections that act as a manifold for multi tensioning applications.
TSS Series Bolt Tensioners are specially designed for sub sea applications. These Tensioners are suitable for higher pressure rating flanges also. It’s ergonomic design makes it very easy to handle and use by divers under the harsh sea conditions. These tensioners are designed to provide a wide range of flexibility, covering stud sizes 3/4” to 3.1/2” (M-20 to M-85)
High Strength Stainless Steel Construction: The Complete tool is made from high strength stainless steel for use in corrosive sea environment and to minimize maintenance.
Versatile Design: Designed to provide a wide range of flexibility, covering stud sizes 3/4” to 3.1/2” (M-20 to M-85) using just 8 load cells.
Higher Load generation: Generates higher load making it suitable for higher pressure rating flanges (API 170 - 10K)
Long Stroke And Stroke Indication: All tensioners have a 25mm long stroke with piston marked with fluorescent rings for indication of stroke and over stroke limit.
Safe Design in event of Piston ‘Over Stroke’: Designed to release high pressure hydraulic oil inwards in the event of over-stroke, thus saving the operator from any potential exposure.
Multi Tensioning: The tensioning unit cell is provisioned with two connections that act as a manifold for multi tensioning applications.
1/4” Square Drive Spindle to suit all Standard Sockets and Screw Driver Bits.
Bi-Directional operation with consistent repeat accuracy.
Concealed adjustment mechanism to prevent accidental re-setting during use.
1/4” Square Drive Spindle to suit all Standard Sockets and Screw Driver Bits.
Bi-Directional operation with consistent repeat accuracy.
Concealed adjustment mechanism to prevent accidental re-setting during use.
Tool bits coated with Titanium Nitride to give 3 times the life of conventional tool bits.
Ideal for quick facing of projecting tube ends in heat exchangers, condensers and boilers.
One size of tool is suitable for use on multiple tube thicknesses by interchanging pilot. (TEF-375 is the exception with the tool suitable for one tube ID only).
Each tool is supplied with a set of multiple pilots to cover all tube thicknesses.
Tube end facers for MM sizes of tubes also available.
Tool bits coated with Titanium Nitride to give 3 times the life of conventional tool bits.
Ideal for quick facing of projecting tube ends in heat exchangers, condensers and boilers.
One size of tool is suitable for use on multiple tube thicknesses by interchanging pilot. (TEF-375 is the exception with the tool suitable for one tube ID only).
Each tool is supplied with a set of multiple pilots to cover all tube thicknesses.
Tube end facers for MM sizes of tubes also available.
Application : Facing Projecting Tube Ends In Heat Exchangers
MaintenanceEasy Maintenance With One Main Circuit Board
Control ChipLatest Micro-controller Chip For Control Functions
Fully Solid State Design - no moving parts - no wear and tear of parts - no noise - consequently long life.
Uses one main circuit board for easy maintenance.
Uses the latest micro-controller chip for control functions.
Accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results.
Soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases.
Connected drive is automatically recognised & indicated by means of LED on the torque controller.
Torque setting arranged in four different ranges to suit four different drives. Appropriate wattage range is automatically selected for the connected drive, hence drives can not be abused or overused.
Actual drive wattage (torque) is displayed. Set wattage (torque), drive current and line voltage can be seen by press of a button.
Trip time adjustable from ( 0.1 sec to 10 secs. )
Adjustable reverse time from ( 1 sec to 90 secs.)
TRIP time cannot be set if the SET value is below 'no load wattage'. In this case the TRIP time will be automatically set to 7 secs.
The panel enables the operator to select "Speed change % wattage" between 50% and 100% of the SET wattage.
This effectively reduces the variation between TRIP value & SET value.
Pause time (time interval between cycles) adjustable from ( 1 sec to 90 secs.)
Manual reverse by push button, in case of emergency.
Drive Speed adjustable in reverse rotation.
Hand (trigger) mode or foot switch mode, both are available.
Expansions can be carried out either in single cycle mode or auto repeat mode.
LED indicators provided for forward, reverse & trip conditions of drive.
MCB has been provided to protect the controller and drives against over current by short circuits.
Fully Solid State Design - no moving parts - no wear and tear of parts - no noise - consequently long life.
Uses one main circuit board for easy maintenance.
Uses the latest micro-controller chip for control functions.
Accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results.
Soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases.
Connected drive is automatically recognised & indicated by means of LED on the torque controller.
Torque setting arranged in four different ranges to suit four different drives. Appropriate wattage range is automatically selected for the connected drive, hence drives can not be abused or overused.
Actual drive wattage (torque) is displayed. Set wattage (torque), drive current and line voltage can be seen by press of a button.
Trip time adjustable from ( 0.1 sec to 10 secs. )
Adjustable reverse time from ( 1 sec to 90 secs.)
TRIP time cannot be set if the SET value is below 'no load wattage'. In this case the TRIP time will be automatically set to 7 secs.
The panel enables the operator to select "Speed change % wattage" between 50% and 100% of the SET wattage.
This effectively reduces the variation between TRIP value & SET value.
Pause time (time interval between cycles) adjustable from ( 1 sec to 90 secs.)
Manual reverse by push button, in case of emergency.
Drive Speed adjustable in reverse rotation.
Hand (trigger) mode or foot switch mode, both are available.
Expansions can be carried out either in single cycle mode or auto repeat mode.
LED indicators provided for forward, reverse & trip conditions of drive.
MCB has been provided to protect the controller and drives against over current by short circuits.
Design FeaturesFully Solid State Design With No Moving Parts
MaintenanceEasy Maintenance With One Main Circuit Board
Torque Settings1 Watt,Four Different Ranges For Different Drives
Fully Solid State Design - no moving parts - no wear and tear of parts - no noise - consequently long life.
Uses one main circuit board for easy maintenance.
Uses the latest micro-controller chip for control functions.
Accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results.
Soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases.
Connected drive is automatically recognised and indicated by means of LED on the torque controller.
Torque setting arranged in four different ranges to suit four different drives. Appropriate wattage range is automatically selected for the connected drive, hence drives can not be abused or overused.
Fully Solid State Design - no moving parts - no wear and tear of parts - no noise - consequently long life.
Uses one main circuit board for easy maintenance.
Uses the latest micro-controller chip for control functions.
Accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results.
Soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases.
Connected drive is automatically recognised and indicated by means of LED on the torque controller.
Torque setting arranged in four different ranges to suit four different drives. Appropriate wattage range is automatically selected for the connected drive, hence drives can not be abused or overused.
Design FeaturesFully Solid State Design With No Moving Parts
Fully Solid State Design - no moving parts - no wear and tear of parts - no noise - consequently long life.
Uses one main circuit board for easy maintenance.
Accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results.
Soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases.
Connected drive is automatically recognised and indicated by means of LED on the torque controller.
Trip time adjustable from ( 0 sec to 10 secs.).
Adjustable reverse time from ( 0 sec to 90 secs.).
Pause time (time interval between cycles) adjustable from (0 sec to 90 secs.)
Drive toque adjustable in reverse rotation with surface to set torque.
Hand (trigger) mode or foot switch mode, both are available.
Expansions can be carried out either in single cycle mode or auto repeat mode.
Automatic indication on the display for controllers tripping due to voltage or current fault.
Fully Solid State Design - no moving parts - no wear and tear of parts - no noise - consequently long life.
Uses one main circuit board for easy maintenance.
Accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results.
Soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases.
Connected drive is automatically recognised and indicated by means of LED on the torque controller.
Trip time adjustable from ( 0 sec to 10 secs.).
Adjustable reverse time from ( 0 sec to 90 secs.).
Pause time (time interval between cycles) adjustable from (0 sec to 90 secs.)
Drive toque adjustable in reverse rotation with surface to set torque.
Hand (trigger) mode or foot switch mode, both are available.
Expansions can be carried out either in single cycle mode or auto repeat mode.
Automatic indication on the display for controllers tripping due to voltage or current fault.
CompatibilityElectrical And Hydraulic Drives, Tube Pullers
The "Flexible Balance Arm" tool holding system is a major ergonomic development for tube installation and removal in providing an easy to use method of absorbing tool torque and counterbalancing the weight of the tool.
Virtually any tool used in rolling and removing tubes can be used with the 'POWERMASTER' unit, including electrical and hydraulic drives, tube pullers, tube end facers as well as electric and pneumatic tube cutters.
Positive tool holding system virtually eliminates the chance for operator error.
Greatly enhances the accuracy of tube rolling reducing costly improperly rolled tubes.
The "Flexible Balance Arm" tool holding system is a major ergonomic development for tube installation and removal in providing an easy to use method of absorbing tool torque and counterbalancing the weight of the tool.
Virtually any tool used in rolling and removing tubes can be used with the 'POWERMASTER' unit, including electrical and hydraulic drives, tube pullers, tube end facers as well as electric and pneumatic tube cutters.
Positive tool holding system virtually eliminates the chance for operator error.
Greatly enhances the accuracy of tube rolling reducing costly improperly rolled tubes.
The EVOQ series wrenches have similar features to the PSD series wrenches but with the additional advantage of having an “Inline to square drive” reaction arm which prevents torsional twisting load on the body of the hydraulic wrench that happens with conventional hydraulic wrenches.
...more
Square Drive Hydraulic Torque Wrenches Evoq Series
The EVOQ series wrenches have similar features to the PSD series wrenches but with the additional advantage of having an “Inline to square drive” reaction arm which prevents torsional twisting load on the body of the hydraulic wrench that happens with conventional hydraulic wrenches.
StrokeStandard 15mm, Customised As Per Application
FunctionThreaded Piston Acts As A Puller
DesignCompact Design For Space Restrictions
Operational HeightNominal Requirement
Dedicated Tensioners are used for Specific Thread Size Application. In these tensioners the threaded piston acts as a puller too. These tensioners are specially designed for applications having space restrictions, both around and above the stud bolt.
Compact Design: The dedicated tensioner has a very compact dia for required load and size with. nominal requirement of operational height.
Customised Stroke: Tool is available with standard 15mm and customised stroke as per application.
Alloy Steel Construction: All parts are made from High Strength Alloy Steel for better strength and compact design.
Delivery: In-house design and production facilities ensure faster customization and delivery.
Dedicated Tensioners are used for Specific Thread Size Application. In these tensioners the threaded piston acts as a puller too. These tensioners are specially designed for applications having space restrictions, both around and above the stud bolt.
Compact Design: The dedicated tensioner has a very compact dia for required load and size with. nominal requirement of operational height.
Customised Stroke: Tool is available with standard 15mm and customised stroke as per application.
Alloy Steel Construction: All parts are made from High Strength Alloy Steel for better strength and compact design.
Delivery: In-house design and production facilities ensure faster customization and delivery.
Application : Specific Thread Size
Stroke : Standard 15mm, Customised As Per Application
About us Mr. S.L. Advani our Founder and Chairman was a designer of steam boilers in an Indian company between 1963 and 1972. He took up the challenge of manufacturing India's first Steam Boiler and successfully designed and manufactured a steam boiler from scratch. Later, while expanding tubes in boilers, he realized that Tube Expanders were not easily available in India. He perceived this to be an opportunity.
Reviews & Ratings
Write a Review
Post Free Ad