ARAVALI ENGINEERS Sector 63, Noida, Uttar Pradesh

We design and fabricate a wide range of work tables and trolleys in customized dimensions, constructions, accessories and loads.

Our wagon loaders are designed to handle the loading and unloading issue of bags in or from wagons. Mounted on a fully mobile chassis, the loader can handle hundreds of bags of 50kg or above weight each hour. We have both power driven and manual driven chassis with us that you can choose from, according to your wagon loading or unloading requirements. The convenience of hydraulic operated height adjustment allows you to reach different portions and levels of the wagon. The conveyors can easily be linked with other conveyor lines, for conveying products directly from the production lines to the distribution area. It will also allow you to load or unload a number of wagons at the same time.   Our wagon loaders and unloaders provide optimum solution for loading and unloading of bags in wagons. These are mounted on a fully mobile chassis to offer greater loading bay flexibility. The chassis is available two versions - power driven and manual driven. The conveyors provide hydraulically operated height adjustment to provide access to different portions of the wagon. The conveyors can be easily linked with other conveyor lines bringing the products straight from the production lines or storage area and distributing them to the different docks. The telescopic belt conveyor can reach all the way inside the trailer or rail car for easier, efficient and safe loading and unloading.

We design and fabricated custom made trolleys for all kinds of raw materials, components and finishing goods.

We offer customized solutions for transfer of assemblies in vertical and horizontal loops. The transfers are controlled process and managed for accumulation or traffic control by using PLC controlled solutions for tracking of assemblies. The transfer can be achieved by:   45 degree/90 degree/180 degree turn belt conveyors Aero Mechanical Conveyorsrs Motorized shuttle Conveyors Manual Ball Transfer Table   The transfer solution can include changing the orientation of the assembly in the horizontal or vertical plane. Most motorized transfers are PLC controlled with optical sensors ensuring safe transfers for the safety of the assembly and the operator. These are integrated with the main assembly line for seamless and high speed transfers.     For high speed unit transfers pneumatic diverters with TRT modular belts are also available. Based on the transfer/sortation logic the units can be divided in to various lines using the pneumatic diverters.   Other than forming a seamless assembly line over the different bends and curves on the factory floor these solutions are particularly effective in quality control lines for sorting assemblies through the rework loop. Other application includes dividing the main assembly in to multiple ageing or testing and online storage lines. These solutions can be customized for palletised assemblies and other unit assemblies.   Common Constructions: Extruded Aluminium Sections/MS Tubular Sections/SS Sections   Please send us your detailed requirements to get customized quotes for the best solution for your requirement.

Our telescopic belt conveyors are suitable for all requirements of easy and efficient loading and unloading of goods. All kinds of unit loads such as cartons, packages, bags, crates and like can be easily conveyed in or out of trucks, trailers, vans, containers, wagons and even aeroplanes. Our loading and unloading conveyors find extensive use in warehouse/distribution centres, manufacturing and logistics companies.   Telescopic belt conveyors are used for bridging variable distances from the loading/unloading point to the storage area. The process starts as soon as the truck is docked, the conveyor is extended inside the truck and the operators transfer boxes from the truck to the storage area, or vice versa, using the conveyor. As the truck starts filling/emptying the reach of the conveyor can be extended/retracted using very simple controls.   Automation systems such as - bar code reader, RFID readers, package counters, etc can be incorporated into the systems to keep track of the packages being loaded or unloaded.   Depending on the docking conditions of the trucks, three different types of telescopic belt conveyors are available. For more information about telescopic conveyors please contact Aravali Engineers on sales@aravaliengineers.com or call +91-9910076877. They are the manufacturers of customized telescoping conveyors and can provide customized solutions for any requirement.

Country of Origin : 380-415 V

RV pipe and joint system is an adaptive material handling system for lean manufacturing programs and to support continuous improvement. We have a broad range of plastic coated steel pipes, C NICO pipes, powder coated pipes, stainless steel pipes, clamps and accessories that can build a variety of structures at workstations, flow racks, carts and other material handling and storage structures that can be reconfigured again and again to match manufacturing, storage and assembly needs.Pipe racks And FIFO racks DIY racks, trolleys, carts And table, Limitless applications possible.

Storage racks are the core elements to configure the auto storage retrieval system. The racks can be integrated within the building structure or can be free standing structures

Capacity 1000 Kgs, Width over forks (W) 550 mm, Fork length (L)1220 mm, Minimum Fork Height (M)80 mm, Maximum Fork Height (H)V200 mm, Steering Wheels PU (A)180 x 62, 78 x 70 mm,Self Weight (Approx.)86 Kgs.

Number Of Flower : Mechanical Conveyors

Certification : CE Certified

Application : Moving Goods

Condition : New

Material : SS

Width over forks (W): 550 mm. 685 mm. Fork length (L): 1220 mm. Minimum Fork Height (M): 80 mm. Maximum Fork Height (H): 200 mm. Steering Wheels PU (A): 180 x 62

Capacity : 1000 Kgs. 2000 Kgs. 2500 Kgs.

Stacker Cranes are the work horses of the system that provide and take delivery from the storage racks. Our Stacker cranes operate at high speed with low noise and minimum vibration of the structure.   Stacker Cranes travel on the floor rail and maintain vertical state by the top guide rail, while the lift carriage travels along the mast at the same time. When the stacker crane has been positioned at the desired storage location, the shuttle extends and retracts to pick up loads.   The stacker crane is usually operated automatically by the system computer but has provisions for manual intervention. Our stacker cranes are operated by inverters for precisely controlled acceleration or deceleration. The positioning accuracy is maintained by laser guidance which provides accurate position every time despite of wheel wear, wheel alignment or track conditions.

Number Of Flower : Belt Conveyor

Belt Material : Rubber

Belt Width : 10-20 Inch, 20-30 Inch, 30-40 Inch, >40 Inch

Operating Speed : 0-1 M/s, 1-2 M/s, 2-3 M/s

Material : MS

We manufacture slotted angle racks and also customize its design to meet your specific storage related requirements. The storage solution is suitable for stockpiling a variety of things in a structured manner for the optimal utilization of space. These racks can be completely dismantled and you can adjust their dimensions by extending the length and height, according to your requirements. Flexible and easy to install, these racks are suitable for the storage of hand loaded materials or light duty loads.   We can supply a variety of racks for storage of products in warehouse, shops, malls and other places. Using supreme quality raw materials, these storage racks are designed with advanced machinery for an excellent load bearing capacity. Each rack undergoes extensive pre- and post-treatments, painting and surface finishing to increase their resistance against the corrosion.   Advantages and features of our slotted angle racks : Safe and economical to store hand loaded materials Easy installation Custom designs with extendable dimensions Robust, corrosion-resistant and flexible

For heavy assembly and fitting processes. The conveyor design is suited for impact loads during fitment and assembly. The assembly can be mounted on the conveyor slats using suitable fixtures. Slat conveyor chain is available in a wide variety of breaking strengths 1400 kg to 41000 kg. Heavy duty configurations and conveyor designs can be custom made for heavier conveying requirements. Accessories available illumination, electrical sockets, display board, centre platform, display counter, end stopper, tool hanger, screw channel, bin hanger, air pipeline with QRC, rejection chutes and bin stands Constructions Extruded Aluminium sections, MS sections, SS sections.

Manufacture slat chain conveyors for CFL testing lines. The CFL holders are mounted on top of the slat chain conveyors and are powered online through bus bar system. Different cycles of testing and ONOFF durations can be designed as per your testing process. The testing capacity for testing can be customized based on your requirements and can range from 5000 CFLshr to over 11000 CFLshr.

Material : Stainless Steel

Length : 40-60 Feet

Our gravity skid conveyors find use for online FIFO storage and conveying of heavy loads under gravity. The rugged construction of these conveyors allow conveying loads in excess of 1,000 kg per running meter. The skids are fabricated in heavy duty MS structures with cast wheels for jam free and low friction conveying for many years of service life.

Reversible shuttle mounted conveyor for transfer from multiple parallel lines. Shuttle is mounted on a track actuated by a pneumatic system or a motorized system. For multi-lane indexing an electric actuator can be used. The conveyors are customized for wide range of loads and for many applications such as one to many or many to one transfers. The conveyor is designed on the basis of the load to be carried and can be a belt conveyor, band conveyor, chain conveyor or roller conveyor.

Reversible shuttle mounted conveyor for transfer from multiple parallel lines. Shuttle is mounted on a track actuated by a pneumatic system or a motorized system. For multi-lane indexing an electric actuator can be used. The conveyors are customized for wide range of loads and for many applications such as one to many or many to one transfers. The conveyor is designed on the basis of the load to be carried and can be a belt conveyor, band conveyor, chain conveyor or roller conveyor.   Accurate shuttle travel can be achieved with use of servo motors and for tracking and positioning magnetic read sensors or laser sensors can be used.   The system is completely PLC controlled system with feedback sensors for accurate monitoring and control.   Constructions Extruded Aluminium sections, MS Sections, SS Sections.