BEDA Flow Systems Pvt. Ltd. Sector 11, Noida, Uttar Pradesh

Turbine flow meter, Turbine flow meters are precise and reliable measuring equipment, designed for varied applications. Basically, the VTR series consists of a rotor, the housing and the measurement pick-up. As a result of the specific inner diameter, the turbine’s revolutions are directly proportional to the flow. VTR flow meters can be installed even under the harshest application conditions including oil, petrochemical and chemical industries as well as other industrial sectors. All VTR flow meters are individually calibrated.

Tube bundle, HBE Tube bundle heat exchangers allow heat exchange performances of up to 1,000 kW with pressures of up to 35 bar (oil) resp. 10 bar (water). They are economically priced and space-saving.

HBE torsional couplings are suitable for the assembly on diesel-driven engines and hydraulic pumps. They are economical, dampen vibrations and can be installed by a simple plug-in.

Standard stainless steel canister Material: Hastelloy (1.45712.4610) Chemical resistance: good Pressure range: vacuum up to 25 bar (as a special solution possible up to 300 bar) Temperature range: -190°C up to +350°C Pressure and heat resistance: average resistance Advantages: customized solutions very easy to realize, very solid, different materials

Chemical resistance: it depends on the type of plastic and the medium,Pressure range: low vacuum up to 6 bar (6 bar assured up to a temperature of 20°C),Pressure and heat resistance: high expansion,Advantages: no eddy currents, strong.

The heating surface of the DOC® Brazed Plate Heat Exchanger consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, normally in full counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled, The sturdy connection blocks allow high fastening torques for assembling.

Internal gear pump, Thanks to internal gear wheels, the gear pump ZPI allows an especially low-noise conveying of the fluid which not only reduces the noise emission but also the costs for noise-absorbing measures. Furthermore, the high volumetric efficiency of the ZPI internal gear pump has a positive effect on the energy balance due to the improvement of the overall efficiency.

The heating surface of the DOC® Brazed Plate Heat Exchanger consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, normally in full counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled

HBE Starex® drive couplings consist of a double cardanic curved tooth gear coupling and are predominantly used in general mechanical engineering and hydraulics. The couplings are maintenance free due to their material combination plasticsteel and compensate a misalignment of the shaft in axial-radial-angular. They are axially pluggable and available with finish bore metric H7, taper bore and inch bore as well as with toothed wheel work. The basic assortment can be delivered ex stock.

The couplings are maintenance free due to their material combination plasticsteel and compensate a misalignment of the shaft in axial-radial-angular. They are axially pluggable and available with finish bore metric H7, taper bore and inch bore as well as with toothed wheel work. The basic assortment can be delivered ex stock.

Our most flexible line of external gear pumps, the ZPD has been used in countless applications the world over. The basis of its success stems from a platform of customisation that rivals even the most competent competitors. Available in cast iron and stainless steel bodies, the ZPD flaunts 43 displacement sizes, 5 shaft seal options and multiple bearing and wear plate choices. ZPD gear pumps are specifically used for wide flow range metering applications and transfer applications. Volumetric efficiency values of over 90 % are typically achieved.

SUCO offers a wide range of electronic pressure switches, which are available as normally open (NO) or normally closed (NC) versions. An electronic pressure switch converts the medium pressure which is present at the measuring cell into a digital, electrical switch signal (ONOFF). An electronic pressure switch is more complex than a mechanical pressure switch, and thus generally more expensive. As an electronic pressure switch has no moving parts (relative to each other), it usually has a much prolonged service life and provides a higher level of precision (depending on application). The hysteresis can be set over a wide range and virtually independently of the switching point. Electronic pressure switches can also be equipped with additional functions, such as optical displays and menu control.

Elastic drive couplings are torsionally flexible and free of maintenance. They are axially pluggable and reduce vibration.

The Series PT'K round bell housing with integrated oil air cooler has been designed for electrical motors with 0.55 up to 22 kW and allows a high cooling capacity with low noise output on the smallest installation space.

HBE Bellhousings function as connection elements between IEC electric and petrol motors and hydraulic pumps. They are available for nearly all hydraulic pumps and in all sizes ex stock at short times. Users can choose between a rigid (form A) and a noise absorbing model (form B) according to VDMA 24561. The standard versions are made of aluminium, but are also available in steel and stainless steel.

HBE aluminium foot brackets are suitable for the horizontal installation of motor, bellhousing and pump and allow a separate assemblydisassembly of motor and pump. The series PTFL is a lightweight and space saving construction, the series PTFS has been designed as a heavy line especially for multiple pumps.

HBE oil-air coolers have been designed for a fast cooling in return lines of hydraulic systems. They are featuring an especially low-noise operation as well as a high cooling performance. The oil-air coolers are available in different sizes.

Beinlich delivery pumps are nearly wear-free due to the use of high-performance materials like nitrided steel or spheroidal cast iron. Thus, the pumps not only have minimal maintenance requirements, but also a long service life.

Beinlich self-priming delivery pump units consist of external gear pumps which are made from standard materials 0.7050 (housing) 1.8550 (shafts and gears) and FKM (static seals).

The TR TRG radial piston pump was designed for the high pressure range up to 700 bar and for uncritical, clear media. The pump is available in different versions. Moreover, Beinlich offers the product series TRDTRGD with coated pistons for poorly and non-lubricating media.

Magnet systems and permanent magnetic couplings in specific, are an important step to environmentally compatible magnet technology. In cases where highly toxic or aggressive media is used, hermetically sealed drives are inevitable.

Complementing to the range of product offerings including permanent magnetic couplings, canisters, SSIC ceramic plain bearings and the patented BOROHARDCAN®, DST also provides agitator drives made from stainless steel 1.4435 1.4404.

Predominantly for use in centrifugal pumps, DST produces complete SSIC Ceramic plain bearings. The bearings are available as axial and radial types and can be combined with the DST standard permanent magnetic couplings.

DST designs and manufactures canisters of highest quality. The large range of products is available in various materials and hereby covers a wide spectrum of applications.