Cable Accessories Dealers in Noida

Specifications BNC CONNECTOR, DC WIRE/PIN, SMPS (12V 1A TO 12V 20A), AUDIO BOX, IR 24 LEDs, IR 36 LEDs, IR 48 LEDs, GLASS, DOME CAMERA STAND. The BNC connector (Bayonet Neill–Concelman) is a miniature quick connect/disconnect RF connector used for coaxial cable. It features two bayonet lugs on the female connector; mating is achieved with only a quarter turn of the coupling nut. BNCs are ideally suited for cable termination for miniature-to-subminiature coaxial cable (e.g., RG-58, 59, to RG-179, RG-316). It is used with radio, television, and other radio-frequency electronic equipment, test instruments, video signals, and was once a popular computer network connector. BNC connectors are made to match the characteristic impedance of cable at either 50 ohms or 75 ohms.   Types and compatibility Types BNC connectors exist in 50 and 75 ohm versions, matched for use with cables of the same characteristic impedance. The 75 ohm types can sometimes be recognized by the reduced or absent dielectric in the mating ends. The 50 and 75 ohm connectors are typically specified for use at frequencies up to 4 and 2 GHz respectively. Video and DS3 Telco central office applications primarily use 75 ohm BNC connectors, whereas 50 ohm connectors are used for data and RF. Many VHF receivers used 75 ohm antenna inputs, so they often used 75 ohm BNC connectors. Compatibility The different versions are designed to mate with each other,[2] and a 75 ohm and a 50 ohm BNC connector which both comply with the 1978 standard, IEC 169-8, will mate non-destructively. At least one manufacturer[4] claims very high reliability for the connectors' compatibility. At frequencies below 10 MHz the impedance mismatch between a 50 ohm connector or cable and a 75 ohm one has negligible effects.[5]BNC connectors were thus originally made only in 50 ohm versions, for use with any impedance of cable. Above this frequency, however, the mismatch becomes progressively more significant and can lead to signal reflections. BNC inserter/remover tool A BNC inserter/remover tool also called a BNC tool, BNC extraction tool or BNC apple corer, is used to insert or remove BNC connectors in high density or hard-to-reach locations, such as densely wired patch panels in broadcast facilities like central apparatus rooms. BNC tools are usually light weight, made with stainless steel, and have screw driver type plastic handle grips for applying rotating torque. Their shafts are usually double the length of a standard screw driver. They help to safely, efficiently and quickly connect and disconnect BNC connectors in jack fields. BNC tools facilitate access and minimize the risk of accidentally disconnecting nearby connectors.

We offer a comprehensive range of HDMI Cables to our clients across the nation. Designed in compliance with the international quality standards, these cables are largely appreciated for their construction and heat resistance. We accomplish the bulk requirement and in order to achieve this objective these cables are tested on various quality parameters. Highly applicable for domestic as well as industrial purposes, these are available at market leading prices.

BNC Connectors are widely used in various electronic items for audio or video output. BNC (Bayonet Neill–Concelman) Connectors that we offer are easy-to-connect and disconnect. Our BNC Connectors are compatible with any radio, television, computers, test instrument, etc. All customized combinations are available for our BNC Connectors.

Available in several funky colors like hot pink and electric blue, our rubber Apple iPhone Charger Cable Protector is especially suited to save the Lightening USB Data Charger from tearing. Not only is it extremely easy to connect with the charger, but its impressive performance and long lasting nature makes it the best accessory to aid your user experience. Also, you can easily identify your own unique cable from miles away.

Whatever the job requires, whether it be cable protection, cable identification, coaxial cables, ethernet cable, cable ties, handling, or cable clips, RS's range of cable accessories and cable management has a solution to meet your needs. Choose from leading brands such as Hellermann Tyton, Thomas & Betts and TE Connectivity, or try RS's own brand for quality alternatives at competitive prices.

Knowing us as a reputed firm, we are engaged in manufacturing and supplying a wide range of Wire Connector in Noida, Uttar Pradesh, India. We manufacture this wire connector using optimum quality raw material, sourced from vendors of high repute. Wire Connector

Features • Available in long lengths 3 Mtrs & 6 Mtrs. • Available in standards sections namely 40 x 20 and 41 x 41 • C- Strut available in Hot Dip Galvanized, Powder Coated. • Available with or without slots. MEM ® has a practice to punch the C-Strut for multiple applications. • C-Strut Racks can be fabricated out of the C-Strut sections. Wide Range of accessories available for fixing such as: • Spring Nuts • Beam Clamp • Framing Accessories like Elbows, Tees, Base Plate and Angle. • Cable Clamping accessories like Hook Clips and Split Clips.

  Hose Reel with high quality hose pipe 1/2x15m+1.5m connecting hoseWith Spray Gun multiple pattern & Tap connectorSuitable for gardening, car wash, etcRust & corrosion resistantAnti drip protectionEasy to assembly & to useLightweight design & easy to carry

Item Code: 2       Brand Name : Indosoft       Indosoft Corporation : Assurance of best quality electronic surveillance products.