FeatureOffers Excellent Electrical Insulation,Resistant To Moisture,Water,Heat,Mild Acids,And Alkali,Easy To Use,Allows Machining,Drilling,Tapping,And Cutting,Once Hardened
Processing Time15 minutes approximately for 50g mix at 30° C
Setting Time60 minutes approximately for 30g mix by Shore-A at 30° C
Water Absorption after 24 hrs curing at 30° C<0.5 percent
Working Temperature Limit80° C
This easy-to-use, multipurpose, two-component epoxy putty especially used for several sealing, gripping, joining, and insulating tasks on various surfaces like granite, ivory, ceramic, leather, and metal.
Applications
Clean oil, grease and dirt from the surfaces.
Abrade the surface with sandpaper
If you have greased the surface, degrease it using acetone
Mix the resin and hardener in equal volumes, and knead until you obtain a uniform color
Apply the mixture immediately after mixing is complete
Smoothen with a damp cloth within 20 minutes.
Precautions
Trim your nails before mixing
You may use hand gloves to protect your skin
Do not add any other solvent to the mixture
After mixing, do not hold the mixture in your hand
Wash your hands with soap and water immediately after application
Wait one to two hours after application for the mixture to harden completely
Post Free Ad