Hydrocyclone Dealers

Technical features and advantages Simple structure and there is no moving parts High capacity and high classifying efficient Easy to disassembly and easy to maintain Low investment cost and taking little space

Features simple structure and there is no moving parts high capacity and high classifying efficient easy to disassembly and easy to maintain low investment cost and taking little space.

Hydrocyclone has been extensively used for closed circuit grinding and classification system , thickening, desliming, dewatering , tailings filling, damming, recovery processes in ferrous, nonferrous metal and nonmetal mine industries, and is deeply popular with customers due to high classification efficiency, simple structure, large throughput, and small occupied area. FEATURES Simple structure and there is no moving parts High capacity and high classifying efficient Easy to disassembly and easy to maintain Low investment cost and taking little space APPLICATION Hydrocyclone has wide application in metal ore and nonmetal ore processing plants, such as plants of iron ore dressing industry, manganese ore beneficiation industry, coal industry, environmental power, alumina industry and some other mining industries.  

Hydrocyclone has wide application in metal ore and nonmetal ore processing plants, such as plants of iron ore dressing industry, manganese ore beneficiation industry, coal industry, environmental power, alumina industry and some other mining industries.

Hydrocyclone Technical Description Hydrocyclones can be used to separate solids suspended in liquids. In  the suspension is prepared in a tank. A stirrer prevents premature settling of the solid particles. An eccentric screw pump delivers the suspension into the tangential inlet of the cyclone. In the cyclone a downward primary vortex is created. The downward taper causes the vortex to reverse. In the middle it moves as a secondary vortex back up towards the immersion tube, where the suspension emerges from the cyclone, having lost the coarse material in it. Inside the cyclone an air core is formed. The centrifugal forces cause the coarser solid particles in the primary vortex to be enriched. They are discharged with the bottom flow at the apex nozzle. It is mainly the fine material that is discharged from the top. The outflow form of the bottom flow changes depending on the solid concentration of the introduced suspension. Where the solid concentration is high, strand discharge occurs. Where the solid concentration is low, the discharge is fan-shaped. The flow rate in the inlet is adjusted by way of the pump speed and measured with a magneto-inductive flow meter. Sampling points are installed at the bottom and top flow points. The flow rates in them can be determined by means of a measuring cup and a stopwatch. To determine the solid concentration, a balance and a drying chamber are recommended. Using a suitable analysis device (such as a diffraction spectrometer), a separation function can be produced and the separation size determined. Quartz powder is recommended for use as the solid.

Hydrocyclone has been extensively used for closed circuit grinding and classification system , thickening, desliming, dewatering , tailings filling, damming, recovery processes in ferrous, nonferrous metal and nonmetal mine industries, and is deeply popular with customers due to high classification efficiency, simple structure, large throughput, and small occupied area.     Hydrocyclone has been extensively used for closed circuit grinding and classification system , thickening, desliming, dewatering , tailings filling, damming, recovery processes in ferrous, nonferrous metal and nonmetal mine industries, and is deeply popular with customers due to high classification efficiency, simple structure, large throughput, and small occupied area.   Features Simple structure and there is no moving parts High capacity and high classifying efficient Easy to disassembly and easy to maintain Low investment cost and taking little space Application Hydrocyclone has wide application in metal ore and nonmetal ore processing plants, such as plants of iron ore dressing industry, manganese ore beneficiation industry, coal industry, environmental power, alumina industry and some other mining industries.

Avail from us highly effectual Hydrocyclones. Our Hydrocyclones are an outcome of the sophisticated technology and high-grade components that we put in for their manufacturing. Assuring reliable performance and high durability, our Hydrocyclones stand ahead amongst the rest in the market. Owing to such factors, the Hydrocyclones are highly demanded in the agricultural industry. Available Sizes 2 & 3 inch

Hydrocyclone has been extensively used for closed circuit grinding and classification system , thickening, desliming, dewatering , tailings filling, damming, recovery processes in ferrous, nonferrous metal and nonmetal mine industries, and is deeply popular with customers due to high classification efficiency, simple structure, large throughput, and small occupied area.   Pretreatment: Using the hydraulic hammer to crush the big stone into smaller one, and arrange the worker to cut through the long reinforcement to prevent damaging the belt conveyor. Simple structure and there is no moving parts High capacity and high classifying efficient Easy to disassembly and easy to maintain Low investment cost and taking little space

MBE’s hydrocyclones have found a wide field of application in field of mineral processing plants and other processing plants around the world. These hydrocyclones are suited for varied application like desliming, degritting, thickening, et al. MBE design include hydrocyclone from 160mm diameter to 500mm diameters with volumetric feed rate ranging from 40m3/hr to 160 m3/hr. Depending upon application these hydrocyclones can be lined with different materials like ceramic, Ni- hard etc.Different diameter spigots are also available for these cyclones. Depending upon the product size requirement, the underflow and overflow nozzles are selected to achieve the perfect product sizes in combination with the feed pressure to the inlet of the Cyclone. The MBECMTI Hydrocyclones are provided with 3 different sizes of underflow nozzles alongwith he machine to the Client for them to achieve the desired results. These hydrocyclones are being used extensively for size separation and thickening of fine coal slurry.

We are engaged in offering a wide assortment of Polyurethane Hydrocyclone. These high grade Polyurethane Hydrocyclone are fabricated from finest grade metals procured from reliable vendors. Thus, our high grade Polyurethane Hydrocyclone works efficiently with very less power consumption. We offer this Polyurethane Hydrocyclone at industry competitive price range.

They are also called as Centrifugal separators. These filters are very simple and efficient for filtering or separating sand particles or silt from irrigation water. The spiral motion of the water when it enters the Hydrocyclone creates a contrifugal force, which pulls down thc heavy particles. The bottom tank of tho conical filter will collect the separated particles. Hydrocyclone are available in capacities of 10, 20,3A oncl 50 m3h. The pressure drop required by cyclones for separation of sand particles and silt are very low.

A hydro cyclone is a device to classify, separate or sort particles in a liquid suspension based on the ratio of their centripetal force to fluid resistance. This ratio is high for dense (where separation by density is required) and coarse (where separation by size is required) particles, and low for light and fine particles. Hydro cyclones also find application in the separation of liquids of different densities. Hydro cyclones are highly desired because of their: Reclaim valuable ores by separating light and heavy minerals such as gold, copper and iron ore from feed and tailings In pulp and paper mills to remove sand, staples, plastic particles and other contaminants. Wash and classify material easily Relatively Low cost Large capacity per unit area Simple Structure and High Volume Amenability to computerized control    

Hydrocyclone has been extensively used for closed circuit grinding and classification system , thickening, desliming, dewatering , tailings filling, damming, recovery processes in ferrous, nonferrous metal and nonmetal mine industries, and is deeply popular with customers due to high classification efficiency, simple structure, large throughput, and small occupied area. Features Hydrocyclone has wide application in metal ore and nonmetal ore processing plants, such as plants of iron ore dressing industry, manganese ore beneficiation industry, coal industry, environmental power, alumina industry and some other mining industries. Simple structure and there is no moving parts High capacity and high classifying efficient Easy to disassembly and easy to maintain Low investment cost and taking little space

Hydrocyclone has been extensively used for closed circuit grinding and classification system , thickening, desliming, dewatering , tailings filling, damming, recovery processes in ferrous, nonferrous metal and nonmetal mine industries, and is deeply popular with customers due to high classification efficiency, simple structure, large throughput, and small occupied area.

We are offering ceramic lined cyclones & hydrocyclones. Cyclone separators are used in cement plant, coal washery and mineral processing industries which are subject to severe abrasion and suffer heavy wear. Hofmann supply cyclones and its component either in ceratuff-92, azs or sic-871 as per criticality of the equipment and its size and shapes