Manmachine India Private Limited Sector 6, Noida, Uttar Pradesh

The ZENTOOL Dual Action Polisher represents one of the latest advancements in machine polishing technology. With an orbit (throw) of 21mm, the dual action polisher has evolved to become a leader in efficient cutting power while still maintaining the safe operation expected from a DA polisher. Compared to rotary polisher this machine achieves a far superior finish with no holograms. Rotary polisher can cut easily but leaves too many paint defects. Painters use compounds containing fillers to mask these defects.   The ZENTOOL is powered by a 900W motor (Rupees is 500W), and even with the massive 21mm orbit still operates smoother than traditional dual action polishers. The backing plate features ventilated cooling channels to help reduce heat transfer. Due to the large orbit diameter, buffing pad weight plays a major role in maintaining a smooth operating machine. Ideal pad weight for the ZENTOOL is up to 27g. ZENTOOL is priced lower than even Rupes polisher and comes with free 5" and 6" backing plates and a 1 year warranty. SPEC / COMPARISON BTW DIFFERENCE COMPETITORS:- Flex XC3401VRG - 8mm orbit but uses forced rotation to achieve higher cut. Users consider this machine to have slightly more vibration than Rupes and Zentool   Rupes LHR21E - 21mm orbit. Uses longer orbit to achieve higher cut. Only 500w motor and can sometimes bog down easily due to the orbit diameter & no extra backing plate is given with the machine.   Zentool ZEN-21E - 21mm orbit. Uses longer orbit to achieve higher cut. Has a 900w motor to reduce bog down issues & Extra 5 “inches backing plate is given Free with the machine to cover tight areas.

ARES 37/1 Wet & Dry Vacuum Cleaner with a single stage motor reaches upto 1400w of maximum power.    

Wasa 300 Designed for tractors and UNIMOG, the Wasa 300+ is used to clean streets in small towns and communities. The high performance machine picks up dirt mechanically, whereby large amounts of fine dusty exhaust fumes are avoided. The towed sweepers offer maximum sweeping performance and can even be used for the coarsest of dirt. A 3.0 m³ hopper enables the travelling of large areas and routes. With this towed sweeper, debris is conveyed from two side brushes to the centre brush at the rear of the machine and is transported from there via an elevator into the large pick-up hopper. All functions are easily operated via a clearly arranged control panel from the vehicle cabin. The Wasa 300+ was designed so that all the relevant parts are easily accessible and all necessary settings and repairs can be carried out simply.   The sweeper is driven by an environmentally friendly hydraulic system which operates silently even at full power and is suitable for operation with organic oil. The Wasa 300+ offers other interesting options such as the high-pressure washing system, which allows for specific adjustment to its sweeping task.

Three Phase Industrial Vacuum Cleaner Ideal for intensive and continuous uses. Equipped with a 3.0kw THREE-PHASE Turbine.

ESTRO-125 An extractor with double stage motor that’s ideal for applications such a cleaning of car interiors & upholstery. The model is designed with an innovative 8 ltrs. detergent tank to be assimilated to the trolley and completely residual liquids tank.    

A right angle wash that helps clean difficult-to-reach areas Easily removes mud and debris from the underbody Underbody wash without gantry/lift Avoids tyres alignment and balancing problem Made with high grade stainless steel for long life Task is done in less than 3 mins.  

SK 600 The truck mounted SK 600 sweeper has a 6.0 m³ hopper and is specially designed for cleaning traffic areas in local authority districts and country roads. The machine is suited for all common truck chassis with a permissible total weight of 15 to 18 tonnes. Thanks to its noise suppression package, the SK 600 can also be used between 10pm and 6am. Furthermore, it fulfils the dust particle guideline and bears the PM10 badge. The SK 600 has a sweeping width of 2,300 mm, the whole area is swept mechanically thus making it both quick and efficient. Disc brushes and the suction nozzle are towed with a centre brush directly behind the machine – damage is thus almost impossible Three versions are possible for the drive of the suction fans and working hydraulics, either a diesel-powered auxiliary engine, via the vehicle's auxiliary drive system (PTO) or finally a hydrostatic drive system - the latter can also be used for driving speeds of up to 40 km/h. The infinitely adjustable sweeping speed is up to 20 km/h The SK 600 offers several extra functions in addition to basic sweeping. There is an additional front brush which can be extended to sweep on a second level – such as the kerb – or to remove weeds. A spray bar for increased dust control when sweeping can also be used as well as a washing bar for washing dirty surfaces. Lastly, the rear suction system with a pick-up width of 2,500 mm, four water nozzles and two large-sized suction hoses can be used to suck up liquids such as oil spills or to absorb glycol.

Swingo 200+ The Swingo 200+ is an efficient, flexible and convenient compact sweeper for public areas and the city centre. With this machine, many streets, paths and squares can be swept, the lowerable undercarriage also enables sweeping in multi-storey car parks and underground car parks. The sweeping brooms attached to the front have an automatically regulated broom ground pressure control, resulting in maximum manoeuvrability in any sweeping situation. The Swingo 200+ is characterised by a 2.0 m³ large hopper – this means an even greater coverage and an even longer sweeping operation. This machine is ideally suited for your greatest cleaning requirements in city centre/urban areas. The Swingo 200+ is characterised by its optimum weight distribution and a low unladen weight. With this machine, operation on even sensitive ground areas presents no problems whatsoever. Its compact dimensions ensure that the vehicle remains manoeuvrable in any situation, safe, and mobile: The scope of application ranges from maximum to minimum sweeping ranges, i.e. from wide areas to narrow passages. Besides, the Swingo 200+ distinguishes itself through its modular build. Different suspension, sweeping and also steering systems are available. The Swingo 200+ is prepared for all conditions. Quality characteristics Swingo machines have several sweeping performance levels which guarantees maximum operational readiness: sweeping performance levels are continuously set from Standard to Maximum. Thus the Swingo 200+ can cope with all levels of pollution. Additionally, the machine operates at a low noise level. At the normal sweeping performance level only 99 dB are being produced. Due to this the machine is ready for use around the clock. The debris is conveyed by two or three disc brushes to the suction nozzle and then ends up in the 2.0 m3 hopper. The sweeping process happens in connection with the efficient use of circulating water which combines with the debris. In this case, a particularly resource-saving pressurised water recirculation system with water separation and water recovery can be used – this additionally makes sure that only clean and low-dust air is released into the environment. The smooth running lowemission EuroMot 3B or the Euro 6 diesel engine with particle filter and urea injection also contribute to the environmental balance. With a speed of up to 50 km/h, the high-performance but very low-noise motor brings you quickly to your operation location. Other highlights of the Swingo line include the fully-glazed driver cabin which guarantees safety, the air conditioning unit, the hydro-pneumatic suspension to protect the spine, the steering wheel that can be adjusted for optimum driver comfort, the ergonomically designed control system ensures comfortable operation with the use of joysticks and easy to read multifunctional on board computer incorporating cruise control – for more information feel free to contact us at any time!

STEAMJET is the product of 10 years of R&D designed for premium and distinctive steam car wash. It's the only machine in the world with patent technology that can spray steam and wax simultaneously. It's capable of generating high- pressure steam above 8 bar or pressure within I minute. The Wash & Wax as a single potent action forces out tiniest dust and sand particles off the car with high-pressure steam. The moisture element flows down to pick up the residues off the surface. The wax mixing device sprays warm wax to car surface leaving coating was as wipe off moisture. STEAMJET Wax lasts up to 8 times longer than conventional car wash.    

Senior 2000 With its intake capacity of up to a ton of sand, rubble or other debris per minute, the Senior 2000 towed sweeper beats every other sweeper on the market in terms of intake, and that at speeds of up to 20 km/h. The debris is swept by the two side brushes to the wide cross brush and from there conveyed on a belt to the back of a truck. The conveyor belt is adjustable in height, thus allowing adaptation to the height of the platforms of the various towing vehicles. The conveying speed of the belt can be regulated from the driver’s cabin in such a way that the debris is spread evenly over the full surface of the truck platform. Thanks to its exclusively mechanical mode of operation - without any suction apparatus - and its extremely efficient water spraying system, the Senior 2000 is not only much quieter than any other comparable suction sweeper, but it also emits considerably less dust. Through a process of continuous development in terms of capacity, quality and reliability over the past few years, the Senior 2000 has been brought to its present high level of sophistication.

Swivelling adapter with side and top water inlet for easy installation 360° /180° continuous rotation for the car wash Insulated high pressure hose Hose guard with integrated tension release feature Extremely durable Improves the maintenance of pumps and pressure hose

‘Rinse- Less Wash & Shine’ is the most technologically advanced car wash system that requires only 1 to 1.5 liters of water to wash an entire car’s painted surface. This does not require rinsing since there are no soapy surfactants used. This unique product contains substantive polymers which bond to the paint and protect it during the wash. Therefore, ‘ Rinse- Less Wash & Shine’ offers greater protection and lubricity than conventional car washes leaving a sleek & glossy finish afterwards. The waste water in the bucket can still be used to water the lawns.

Without threads that may bind or only partially connect Automatic locking system facilitates faster access Suitable for confined areas Non-drip interface Minimizes unexpected downtime Standard with Manmachine pumps

CAR WASH CAPACITY OF 15-20 CARS IN 1 DAY / SINGLE PHASE ALSO AVAILABLE   Hose Pipe 10 mtrs Gun with quick connect system Lance 500 mm 100 Micron Filter 10 Micron Filter (Only By MMW) Nozzle 25°  

Professional Hot & Cold Water High Pressure Cleaners ACDS (Advanced Control with Delayed Stop Mechanism) Automatic shutdown if idle for more than 20 mins with micro leakage control. Warning LED ' machine ready' and malfuctioning'. Hour counting device with service alert warning LED(after 400/800 inform customer that is time to make service ) Control of lime scale prevention system adjustable from 35 to 270 mm/h. Motor /pump coupling protection with special lubricant retention system. Triplex plunger RK pump with 3 ceramic pistons, brass pump head with 1450 rpm motor for high efficiency & low maintenance from Annovi Reverberi. Pressure regulation from lance with detergent injection system . On board 3 litre detergent tank and built in water tank with floating valve. Water filter accessible for inspection from the outside of the machine. Diesel filter with fuel stop system for easy devices. Pre ventilated boiler with over 89% efficiency. Motor and engine thermal protection. Two rigid rear wheels and two front swivel casters with brake. Control board protection from dust with translucent cover.

HRK PRO CAR WASH CAR WASH CAPACITY OF 25-30 CARS IN 1 DAY   Hose Pipe 10 mtrs Gun with quick connect system Lance 500 mm 100 Micron Filter 10 Micron Filter (Only By MMW) Nozzle 25°

PROGRESS is available in 4 different heights, 2 widths and flexible bay length, to adapt to the specific needs of your fleet: vans, trucks, trailers, buses, coaches and special vehicles such as tankers or public services. With a hot-dip galvanised structure, PROGRESS and its vertical brushes apply an overlapping front and rear scrub; it also offers great program flexibilit. It includes several wash programs specifically designed for vehicles with panoramic mirrors.

ISTOBAL introduces KUBE, the first model of the new series of cleaning equipment for commercial vehicles HEAVYWASH. The KUBE model offers maximum versatility with 4 different heights to adapt to the specific needs of the retail location or private fleet: vans, trucks, trailers, buses, coaches and special vehicles such as tankers or public services vehicles. KUBE can also be fitted with all the brush materials of our link-it® system: link-feel, link-foam and link-tex. It is possible to choose between different options which have been developed to improve the wash result: lateral and top high pressure, chemical pre-wash, different types of waxes, foams and underchassis.

Sleek & smooth modern design Sight window indicates level of soap remaining Refillable bottle reduces environmental waste Vented large screw cap for easy refilling Comes with a QUICK CONNECT for easy attachment Spray pattern easily adjustable  

4HWD300 is the compact model of the new wash series for bus fleets, HEAVYWASH DRIVE THROUGH, by ISTOBAL. This model has been designed taking into account the individual needs of transport companies: compact wash units with a strong design and reliable mechanics to guarantee an efficient wash. The structure of the machine is made of a hot-dip galvanised steel. 4HWD300 comes standard with 4 vertical brusheswashing asymmetrically and 1 horizontal brush. In this design, the front and rear vehicle areas are washed by the overlapping of the vertical brushes, the sides are cleaned with an overlapping brush wash, and the roof wash adapts to different heights thanks to the lifting system of the horizontal brush. The control panel and the chemical product metering system are built-in on the structure, which makes the equipment both autonomous and compact. The unit provides wash configuration versatility, gentle and precise brush movements for a good finish, a front mirror protection program, a single or continuous cycle operation and underchassis wash integrated in the unit as an optional.

Cleango 500 The Cleango 500 offers the holding capacity of a large mounted sweeper with an approx. 4 m³ hopper and combines this advantage with the flexibility of a compact sweeper. The high-performance vehicle is used for cleaning roads in towns and industrial areas. The towed disc brush system takes up little space underneath the cabin and is attached in front of the front axle. The vehicle is available with a hydraulic setting of the brush angle as well as a separate setting of the disc brush ground pressure as an option. The flexible brooms enable different sweeping ranges and thus optimum adaptation to the individual street conditions. The Cleango has a highperformance suction fan with an air flow of 14000 m³/h. Combined with a suction nozzle width of 670 mm and a debris flap, the vehicle is also designed to pick up larger debris. The drivers cabin is specially mounted to reduce noise and vibration and equipped with two seats, comfortable all-round glazing ensures high visibility of the work and traffic area. The sliding windows on the left and the right, the ergonomic driver seat, a modern heating and air conditioning system, the height and tiltadjustable steering column, the user-friendly menu control via a central display, the control of the sweeping unit via an ergonomically designed door control console with joysticks, the option of a radio-CD device, a tachograph or even an air conditioning system: the Cleango offers all the comfort that a modern, efficient and safe workplace needs.   The vehicle is powered by a high-performance 6-cylinder diesel engine of the latest generation: The Cleango 500 thus complies with not only the Euro 5 and EuroMot 3B emission standards but also the most recent Euro 6 standard. As a result, the Cleango 500 brings its full power to bear in any situation, ensuring consistently efficient sweeping operations.

MNEX22 M’NEX22, MAXIMUM EFFICIENCY & VERSATILITY GENERAL FEATURES OF THE M’NEX: Rollover structure made of hot-dip galvanised steel with a minimum thickness of 50 micras. Service lines connected by energy chain. 4-nozzle wax circuit and shampoo circuit with pneumatic dosing pumps specific to each circuit. Electronic circuits set up for connection to self-service. Hydraulic circuit can work with two different types of water. Non-drip system. GENERAL FEATURES OF THE M’NEX22: Wash and dry rollover comprising 2 vertical brushes and 1horizontal brush controlled by power transducers. Option to include different dryer combinations on the same rollover. Optional structure powder coating with a minimum thickness of 60 micras (30μ primer, 30μ colour)

M'START Everything has a beginning and that is why with the new M’START we have decided to go back to first principles: simple design, ease of assembly and a sober image but with the appeal, durability and technological features expected of a 21st century wash machine. M’START is a rollover designed for wash facilities with a capacity of 400 to 1200 vehicles a month and is the perfect machine for those wishing to start off in the vehicle wash business in the most profitable way.