National Hydraulics Sector 2, Noida, Uttar Pradesh

Safe – designed to be fully stable with working load 300kg. Platform height – Full extended platform height of 2.95M gives an average working height of 5.0M. Easy to transport – compact size and weight means that it can be moved to different area. Easy to Operate – hand controller can be operated either on the ground or on the platform. Battery powered with universal chargers. Conforms to EN280, EN1570 and ANSIASME safety standard.

Tag for capacity and serial numbered identification for traceability. Galvanized coating for corrosion resistance and longer life. Attachments-Master link,Hook,etc are availiable upon request. Hand spliced sling buries wire ends to avoid snaps and injuried.

Fitted with a hinged hosting eye moving in all directions so as to enable the user to place and lift the load from any direction.The lifting clamps are fitted with special hook-up facilities to enable easy fitment of the clamp in horzontal position.The new models have a greater jaw a perture enabling plates of varying thickness to be lifted with the same clamp.

Turntable are to be placed on top, handle must to be attached. Holding while roller skate is moving, minimum turning circle is 3m.

The easy installation to any beam makes it suitable for fixing to any moving hoist,pulleys and loads.It can be adjusted quickly to the beam width by turning the manin spindle.The spindle and snap-pin stops are galvanized to protect against corrosion.

The economical, safe way to tip, drain and store 55 gallon drums.Easy step to drum drainning and storage, Place hook over drum chime, Tip load on curved section.

For additional safety, EdmoLift's design ensures that there are no trapping points between moving parts, minimizing the risk of trapped fingers.Both rear wheels are fitted with toe guards and total stop brakes which stop the wheel from rotating and the swivel head from turning. All wheels have non-marking rubber rims and stainless steel roller bearings.

Convert a forklift truck into a mobile crane to reach and transport long and awkward loads from inaccessible location.Safety chain wedeel to boom has grab hools for anchoring job boom to forklift truck.

Convert a forklift truck into a mobile crane to reach and transport long and awkward loads from inaccessible location.Safety chain wedeel to boom has grab hools for anchoring job boom to forklift truck.Zinc plated fork heels pin for safe forklift attachment.

Light weight & compact design allow mounting convenient. When rope touches the limit arm stopped automatically. Induetion motor stops when the rope is reverse winding. Dynamic brake designs for both static and dynamic loading. It operates on household power source. Mini Winch with built in safety devices feature easy control of lifting for a wide range of applicability for warehouses, storage areas factories house areas constuction sites job sites and plumbings.

Ideal for linear motion, repetitive movemement, or use as a built-in component in equipment.Rollers have a fixed hole pattern for bolt-mounting.Rollers con be used right side up, inverted, or on their side.

Designed for the safe handling many pieces of plates in horizontal direction.150% overload factory tested.The jaw open is easily adjusted according to the thickness of steel plate.

Suitable for lifting loads of any type, For a variety of lifting points.Low expenditure of force through optimal ratio, Lifting claw adjustable in 6 positions, Lift completely usable, Large base plate.

You can avail from us superior quality Standard Hand Hydraulic Pallet Truck. These pallet trucks are designed to provide comfort to the users. Some of its seals are made in Germany. Special Attractions StrongTorsion-resistantTough SteelconstructionLoad-in/lead-out rollersEasy to push and pullErgonomic constructionHighly durableAlso, available with Nylon, Rubber or PU wheelsConforms to EN 1757-2 Uses To transport and lift different kinds of products in warehouses, stores etc Specifications 3Control lever ; Lifting, Neutral, Lowing handleNumber of pump strokes : 11Lifting height per stroke : 15 mm Techinical Specifications ModelCapacityFork LengthFork WidthLifting HeightNHP 10AC1000 Kgs1150 / 1220 mm550/685 mm85-200 mmNHP 20AC2000 Kgs1150 / 1220 mm550/685 mm85-200 mmNHP 25AC2500 Kgs1150 / 1220 mm550/685 mm85-200 mmNHP 30AC3000 Kgs1150 / 1220 mm550/685 mm85-200 mm

We provide Standard Hand Hydraulic High-Lift Pallet Truck. These pallet trucks are manufactured in conformance with the International standards .They have one cylinder system. Special Attractions Simple structureEasy to operateHighly durableNo oil leakageAdvanced handle designConforms to EN1757-4Safe to use Uses Used for lifting of goods in stores, warehouses etc Specifications ModelCapacityFork LengthFork WidthLifting HeightNH10HLT1000 Kgs1150 mm550/685 mm85-200 mm

Sliver colored and PU treatment fights abrasion for additional sling life. Printed WLL on the webbing indicates the vertical rated load of slings for additional safety.

We offer superior quality Stainless Steel Hand Hydraulic Pallet truck. These pallet trucks are designed to provide comfort to the users. Some of its seals are made in Germany. Special Attractions StrongTorsion-resistantTough SteelconstructionLoad-in/lead-out rollersEasy to push and pullErgonomic constructionHighly durableAlso, available with Nylon, Rubber or PU wheelsConforms to EN 1757-2 Uses To transport and lift different kinds of products in warehouses, stores etc Specifications 3Control lever ; Lifting, Neutral, Lowing handleNumber of pump strokes : 11Lifting height per stroke : 15 mm Techinical Specifications ModelCapacityFork LengthFork WidthLifting HeightNHSSP 101000 Kgs1220 mm550/685 mm85-200 mmNHSSP 202000 Kgs1220 mm550/685 mm85-200 mm

Safety clearance between scissors to prevent from trapping. Swivel wheel with protection frame and brake to prevent foot from injury. Built-in relief valve to fulfill overload protection.

Unique technology of quick lifting by double action pump.Larger capacity than normal shop cranes at 3 position.Chrome plated lifting piston and pump piston.Forged heavy duty swivel hook.

You can avail from us well-designed Semi Electric Hydraulic Stackers DH (DC). It is available in Simple and double mast structure. Special Attractions DurableHighly efficientEasy to operateOffers effortless liftingFlexibleConvenient to useEasy maintenanceNo noise pollution Product Features Moves large bulky crates and skids easily with flow control valve located at base of cylinder that regulates lowering speed for safety.Mast are fitted with heavy duty roller bearingHeavy Duty chain with 5 times capacityWith driver safety screenFloor lock brakes that keeps stacker steady when lowering or lifting for driver safety Uses Used for loading and unloadingUsed for short-distance transportation Specifications ModelCapacityLifting HeightNHEST10 / 16(CD)1000 Kgs1600 mm

You can avail from us well-designed Semi Electric Hydraulic Stackers (DC). It is available in Simple and double mast structure. Special Attractions DurableHighly efficientEasy to operateOffers effortless liftingFlexibleConvenient to useEasy maintenanceNo noise pollution Product Features Moves large bulky crates and skids easily with flow control valve located at base of cylinder that regulates lowering speed for safetyMast are fitted with heavy duty roller bearingHeavy Duty chain with 5 times capacityWith driver safety screenFloor lock brakes that keeps stacker steady when lowering or lifting for driver safety Uses Used for loading and unloadingUsed for short-distance transportation Specifications Model NoCapacityLifting HeightNHET 10-161000 Kgs1600 mmNHET 10-201000 Kgs2000 mmNHET 10-251000 Kgs2500 mmNHET 10-301000 Kgs3000 mmNHET 10-351000 Kgs3500 mmNHET 15-161500 Kgs1600 mmNHET 15-201500 Kgs2000 mmNHET 15-251500 Kgs2500 mmNHET 15-301500 Kgs3000 mmNHET 15-351500 Kgs3500 mmNHET 20-162000 Kgs1600 mmNHET 20-162000 Kgs2000 mm

We provide Semi Electric Hydraulic High-Lift Pallet Truck. These pallet trucks are manufactured in conformance with the International standards .They have one cylinder system. Special Attractions Simple structureEasy to operateHighly durableNo oil leakageAdvanced handle designConforms to EN1757-4Safe to use Uses Used for lifting of goods in stores, warehouses etc Specifications ModelCapacityFork LengthFork WidthLifting HeightNH10ELT1000/1500 Kgs1100 / 1140 mm520/680 mm85-800 mm

Avail from us well-designed Self Propelled Hydraulic Scissors Lifting Machine. It is designed to easily lift products without causing any drop or damage. The Self Propelled Hydraulic Scissors Lifting Machine manufactured by us is highly efficient in working and offers ease to the users. Specifications Model NoCapacityLifting HeightWorking HeightNHESP 4.50450 Kgs5000 mm6500 mmNHESP 4.60400 Kgs6000 mm7500 mmNHESP 4.80400 Kgs8000 mm9500 mmNHESP 4.10300 Kgs10000 mm11500 mm

Simple,compact desing. Fully complying product. Manual operation. Fully serviceable components. Fast moving product line . Simple to add rollers etc.