Nitrogen Gas Plant Dealers in Sector 63, Noida

Technology The compressed air is passed through a Twin Tower PSA module interconnected with automatic changeover valves. At the bottom of PSA towers, Activated Alumina is provided which has tendency of adsorbing moisture from compressed air. After passing through this bed of Activated Alumina air gets dried. Supply of dry compressed air from this layer of desiccant (activated alumina) will be continuous without any interruption. Dried compressed air will now come in contact with bed of carbon molecular sieves (CMS). Carbon Molecular Sieves are special grade of adsorbant which have the property of preferential adsorption of oxygen molecules. At a time one tower remains under nitrogen production cycle, whereas the other tower undergoes regeneration which is achieved through depressurization of the tower to atmospheric pressure.   The two towers of PSA modules are inter-connected with automatic changeover valves through pneumatic signal given by solenoid valve which in turn get the electrical signal from the timer provided in the control panel. The changeover time cycle will be 1 + 1 minute. The outgoing nitrogen gas is sent to a surge vessel where the minimum nitrogen pressure will be maintained with the help of Back pressure Regulator. The product nitrogen will now be sent to the consumer point through a pressure reducing valves at required pressure.   Salient Features: 1. The PSA type gas generator is fully automatic and the gas of proper specification is made available within short period after     start-up. 2. This type of gas generator does not require any fuel. 3. Since the feed stock for this gas generator is air, there is no problem like soot formation or presence of Co2 etc. – the common     problem in fuel combustion based gas generator. 4. The gas generator is very compact requiring very small floor area. 5. Depending on the pressure in the nitrogen storage tank, the gas generator keeps running with ON/OFF operation like compressed air installation.   Therefore, the gas generator would work only to the extent of meeting your gas requirement as and when needed.

This is second type of Deoxo unit is with additional after cleaning using copper for endothermic reaction for removal of extra oxygen, the moisture and hydrogen contents and maintained upto 1PPM level. This Ultra pure nitrogen gas finds application in electronic, synthetic fiber and optical fiber industries.   This De-Oxo unit needs two externally heated filled with copper as catalyst for the endothermic reaction : O2 + 2Cu----2CuO   The loaded copper bed can be regenerated by adding hydrogen during the regeneration step. For this two step process (Deoxidization and regeneration), two reactors are necessary to achieve a continuously operating De-Oxo system. The nitrogen form the PSA system with the remaining oxygen passes one of the reactors without adding hydrogen. ON passing through the reactor, the oxygen is removed by reacting with the copper surface, The advantage of the Deoxo unit based on the copper is that the high purity nitrogen leaves the unit absolutely dry & without any remaining hydrogen.

Nitrogen Generators, 3D Wheel Alignment Machine, Plasma Cutte

Nitrogen Tyre Generator, Air Flow Measuring Instrument, Gas Pipin

Nitrogen Plants, PSA Oxygen Gas Generator, Ammonia Cracker

Nuberg supplies hydrogenation reactors to a range of industries. The company specializes in research scale, multi-reactor and high pressure reactors. Also, custom designs are provided for suiting the client’s requirement.