PaiCristal India Private Limited Sector 63, Noida, Uttar Pradesh

Description: Specific cleaner for car glasses, it cleans deeply without leaving spots and halos. It removes also stubborn grime such as exhaust gas deposits, pollutants, organic sediments, dust and dropping, leaving a thin antistatic film, which prevent dust deposition. How to use: Please spray the product on car glasses at a short distance (20 cm) and remove dirt with a microfiber cloth or paper. Rinsing is not necessary. Dilute the product with water (up to 50%), in order to slow down evaporation during the warmer months.

Description: This is a nano-abrasives based refinishing polish able to permanently remove swirls, polishing marks resulting from previous coarse compounds and holograms, which are more visible on dark colours. TOPFINISH 2, recently powered by our R&D department, is the best solution for the extreme refinishing action even of the most delicate and difficult surfaces. Thanks to its balanced and effective blend of nano-abrasives and high performance polishing agents, it allows to achieve the highest standard of perfection and brightness in a safe, simple and quick way. Also black. How to use: Please apply by variable speed polisher, selecting a medium-soft foam pad TT04. Pour a small quantity of compound on the polisher-pad. Let the polisher turn at low revolutions, speeding them up (1000-2000 RPM) while spreading the paste with crossed movements. Pay attention at not overheating the surface. If necessary, please repeat the application more times. Eventually, wipe the surface with a clean cloth.

Description: Plastic restoring polish for plastic car parts. Through its innovative formula made up with top waxes and state-of-the art polymers, this specific polish cleans, shines and restores plastic parts such as dashboards, front and rear bumpers, etc., leaving a semi-glossy and antistatic protective film. It leaves a fresh and pleasant scent. How to use: Please spray a small quantity of product on a sponge or cloth and spread it with circular movements. If a higher gloss level is desired, please repeat the application twice, increasing the quantity. Eventually, remove it with a clean cloth.

Description: Concentrated cleaner for car body polishing. Its formula, rich in high performing components, allows car cleaning in a quick and easy way. It removes with no effort dirt and exhaust gas deposit, insects, dropping, dust and contaminants. Techno Glitter do not create a lot of foam and, through its neutral formulation, it does not leave any film on the surface. How to use: The product can be diluted from 0,5 to 1% with water, according to the level of dirt to remove. Please, apply with a sponge insisting where dirt is harder, and wash away with clean water.

Description: Nano-abrasives based finishing formula with high performance polishing agents. It easily removes light dullness, swirls, polishing marks, holograms and sand scratches up to P4000-P5000, assuring an amazing deep gloss finishing. It is generally applied by polisher with a medium-soft foam pad (light blue). How to use: Please apply a small quantity of compound on the polisher-pad. Let the polisher turn at low revolutions, speeding them up (1000-2000 RPM) while spreading the paste with crossed movements. Pay attention at not overheating the paint. If necessary, please repeat the application more times till the complete removal of scratches. Eventually, wipe the surface with a clean cloth.

Description: This is a super concentrated cleaner ideal for professional yacht and boats washing. Through its innovative components, it removes with no effort stubborn grime and persistent dirt very fast and well, thus being perfect for beginning or end-of-the-season maintenance works. It quickly dissolves stains caused by natural elements and exhaust gas, insects, grease and droppings. It has also a good glossy action, leaving clean and shiny hulls and metal parts as well. Thanks to the total absence of solvents, phosphates and colorants, it is absolutely biocompatible. How to use: This self-drying product can be diluted from 2 to 4% in water. Please apply with a sponge, insisting where dirt is tougher, and wash away with clean water.

Description: Micro-abrasive polish that combines the possibility of removing light scratches with shining and protective properties. It may be used both by polisher with a soft black pad and by hand. How to use: Please apply a small quantity of compound on the polisher-pad and spread the polish with crossed movements. Let the surface dry completely and eventually wipe it off with a clean cloth.

Description: Silky Pink gr 1000 – extra-soft pink microfiber cloth with amazing absorbing properties; anti-scratch, long-lasting, it is specific for dirt removal and very fast drying, easy to use and to wash – 1 Pc nylon bag with blister

Description: Silky Microfiber Cloths – super-soft, anti-scratch, long-lasting microfiber cloth, specific for dirt removal, easy to use and to wash – 2 Pcs nylon bag with blister

Description: Triple action microfiber: removes the toughest dirt, cleans deeply and has high absorbing properties. How to use: Indicated for glasses, headlights and rims. It is resistant, easy to use and to wash. – 2 Pcs nylon bag with blister.

Description: Silky Grey Double-sided – super-soft, anti-scratch, long-lasting grey dual-action microfiber cloth, with a super absorbent side, specific for dirt removal and for drying, easy to use and to wash – 2 Pcs nylon bag with blister

Description: This is a concentrated specific non-acid cleaner that removes superficial rust and iron residues. Its specific formula attacks the metal oxide, dissolving and taking rust away. It is a perfect product for railroad rust and chimney metal particulate removal. Unlike acid products, its revolutionary composition with neutral pH allows a simpler and safer usage, as it does not damage plastic and rubber car parts. How to use: This neutral pH product has a very marked odour; it is recommended to use it in the open air or in a well-ventilated area. Before application, please clean the application area. Then spray Rust Fall-X directly on the surface to treat, letting it act for few seconds. Red-brown flowing down will appear, indicating that the dissolving process has begun. Finally, rinse with a high-pressure water jet.

Description: Specific detergent for inflatable boats, fenders and other rubber details cleaning. It is the ideal solution to quickly and effectively eliminate also stubborn and ingrained grime. Its balanced formulation allows to remove stains caused by weathering, suntan cream, exhaust residues, oil, grease, insects and droppings, without damaging seams and adjacent parts. Thanks to its active and renewing components, RIBY-CLEAN restores the original surface condition and leaves a protective film, which forestalls filth deposition, and contrasts UV rays, preventing yellowing. Extremely simple to rinse out, its plant origin agents make it an absolutely biocompatible product. How to use: RIBY-CLEAN 0.5: please spray the product on the area to treat and let it act for a while; then, remove it with a sponge and rinse out with clean water. RIBY-CLEAN PRO: please dilute it from 10 to 15% in water, depending on the level of dirt to remove. Please spray it on the area to treat and let it act for a while; then, remove it with a sponge and rinse out with clean water.

Description: Grana: grossa Colore: marrone – chiaro Potere abrasivo: molto aggressiva Effetto: superficie opaca ed omogenea Descrizione: pasta aggressiva in grado di lasciare una superficie regolare Confezione: latta da 20Kg Caratteristiche: pasta aggressiva che attraverso la sua combinazione di abrasivi, è in grado di rimuovere segni profondi e arrotondare i pezzi lasciando una superficie regolare ed omogenea, solitamente utilizzata con legnetti

BP127 – PASTE FOR PLAST SHINING PO5 – PASTE FOR PLASTIC AND NATURAL MATERIAL GRINDING LP200MA – PASTE FOR PLASTIC SMOOTHING K1 – PASTE FOR PLAST POLISHING KA – PASTE FOR PLAST SHINING K5 – PASTE FOR PLAST SHINING F – PASTE FOR PLAST SHINING C4 – PASTE FOR PLAST SHINING

Description: Specific cleaner for plastic car parts that degreases and dissolves stubborn stains and grime very fast and well. Through its active components, it guarantees an excellent sanitizing action, thus making it a perfect product also for public transport. It is also suitable for rubber, PVC and leatherette and leaves a fresh and pleasant scent. How to use: HOW TO USE PAI PLAST 0.5: Please spray a little quantity on a sponge or cloth and apply on the area to treat. Let it act for a while, then remove it with a cloth. HOW TO USE PAI PLAST PRO: The product can be diluted in water at a percentage of 25-30%, according to the level of dirt to remove. Please spray it on a sponge or cloth and apply on the area to treat. Let it act for a while, then remove it with a dry cloth.

Description: This is an extra-fine finishing polish; through its combination of micro-abrasives, it easily removes light dullness, swirls, polishing marks and holograms, leaving a deep and clear shine. It is generally applied by polisher with a medium-soft foam pad (light blue). How to use: Please apply a small quantity of compound on the polisher-pad. Let the polisher turn at low revolutions, speeding them up (1000-2000 RPM) while spreading the paste with crossed movements. Pay attention at not overheating the paint. If necessary, please repeat the application more times till the complete removal of scratches. Eventually, wipe the surface with a clean cloth.

Description: Abrasive polish for the surface treatment of resins and composite materials used to remove minor scratches and small defects as well as swirl marks, which may come from previous coarse compounds. Through its combination of micro-abrasives and glossifiers, it has an excellent refinishing action on plugs and moulds. It removes light oxidation, yellowing, black and rusty streaks, tough water spots and pollution marks, restoring the original deep shine of the surface How to use: Please apply by variable speed polisher, selecting a medium-soft foam pad TT04. Pour a small quantity of compound on the polisher-pad. Let the polisher turn at low revolutions, speeding them up (800-1500 RPM) while spreading the paste with crossed movements. Work till you reach a very bright surface, always paying attention at not overheating the surface. Eventually, wipe it off with a clean cloth.

Description: grain: corse colour: dark gray cutting power: very agressive effect: matt and regular surface description: abrasive bar compound for all metals, specificly formulater to remove defects, milling or casting lines, sending process scratches or laser cut burns. it removes, flat or round down quickly, producing a flat and omogeneus surface. it is normally used with panmil or pan-nat clothes wheels. packaging: bars (briks of 800-1000 gr).

Description: This is a polishing cleaner, specially created for yacht and boat washing. It easily removes stains caused by natural elements and exhaust gas, insects, grease and droppings. Unlike many other boat cleaners in the market, NAUTICLEAN is a no-acid formula, which is not aggressive for the gelcoat and does not affect waxed hulls. Rather, through its innovative components it is able to shine the surface and to leave a lasting protection and an antistatic waterproof film, which prevent filth deposition. It generates a minimum quantity of foam and it may be used even with seawater (rinse with clean water). Thanks to the total absence of solvents, phosphates and colorants, it is absolutely biocompatible. How to use: This self-drying product can be diluted from 2 to 4% in water. Please apply with a sponge, insisting where dirt is tougher, and wash away with clean water.

Description: Concentrated cleaner for engine compartments. Its formula, rich in surfactants and perfectly balanced foaming agents, dissolves and removes grease, oil, hydrocarbons and dirt very fast and well, without attacking or ruining the treated part. Spray only in the engine compartment, avoiding contact with varnished parts. How to use: HOW TO USE MOTOR GLITTER 0.5: Please cover control units and fragile electronic devices, spray the product in the engine compartment, let it act for few seconds and wash away with high-pressure clean water. HOW TO USE MOTOR GLITTER PRO: The product can be diluted till to 7-10% according to dirt hardness; please cover control units and fragile electronic devices, spray the product in the engine compartment, let it act for few seconds and wash away with high-pressure clean water.

FLAT PLUS – PASTE FOR METAL SMOOTHING MS – PASTE FOR METAL GRINDING ST285 – PASTE FOR METAL GRINDING PU – PASTE FOR METAL POLISHING LN205 – PASTE FOR METAL SHINING CM – PASTE FOR METAL SHINING

Description: Matt plastic restoring polish for plastic car parts. Through its innovative formula made up with state-ofthe- art polymers, this specific polish cleans and restores plastic parts such as dashboards, front and rear bumpers, etc., leaving a matt and antistatic protective film. It leaves a fresh and pleasant scent. How to use: Please spray a small quantity of product on a sponge or a cloth and spread it with circular movements. Eventually, remove it with a clean cloth.

Description: Grana: ultra – fine Color:e bianco Potere abrasivo: molto basso Effetto: superficie molto brillante Descrizione: brillantatura Confezione: latta da 20Kg Caratteristiche: ottima brillantatura per materiali naturali quali: corno, cocco, conchiglie, corozo, ecc., solitamente utilizzata con legnetti