ROBSPRAY TECHNOLOGY SYSTEMS PRIVATE LIMITED Sector 67, Noida, Uttar Pradesh

Condition : New

Number Of Flower : Spraying Equipment

Condition : New

Number Of Flower : SPRAY ROBOTIC

Number Of Flower : Spray Painting Machine

Application : Spray Painting

Number Of Flower : SPRAY EQUIPMENT AND PARTS

Number Of Flower : Spray Coating Machine

Condition : New

Number Of Flower : Single Axis Robot

SANDING PAPER TOO COARSE • Filler sanded when soft before topcoat application • Insufficient sanded polyester stopper • Insufficient isolation of the stopper

Number Of Flower : Robot Control Systems

Condition : New

SUBSTRATE NOT UNIFORM (EFFECT FINISHES) • Topcoat film build too low • Coating overthinned

Number Of Flower : Pneumatic Control Panel

Driven Type : Pneumatic

DIRT ENTERING WET FILM EITHER FROM AIRBORNE CONTAMINATION OR FROM UNFILTERED BASECOAT

Number Of Flower : Axis Linear Machines

Automatic Grade : Automatic

OCCURS WHEN CHEMICAL REACTION TAKES PLACE BETWEEN TWO INCOMPATIBLE SUBSTRATES • High film builds • Overcoating an uncured substrate • Wet-on-wet system combined with incorrect hardener/thinne

Topcoat not sufficiently cured • excessive film thickness, drying time too short • use of unsuitable thinner • incorrect hardener mixing ratio • wrong hardener used.

Robspray offer wide range of services for spray robot programming and works closely with several leading robot companies to support their automation solutions to customers. Our service supports for complete range for surface plastic ,metal and wood with manual spray guns or atomizer with single or multiple robots station for basecoat solid coat ,clear coat station for automotive and general industries.

Spray Painting Services. Type of Property Covered: Industrial. Iron Structure Spray Painting Service, Client Side. Spray Painting Service

SPRAY MATERIAL SUPPLY TECHNOLOGY

INSUFFICIENT DRYING OF PRIMER FILLER • Solvent or air trapped in film, which then escapes leaving pop marks due to incorrect spraying viscosity, spraying pressure, flash-off times and drying times • Incorrect choice of hardeners and thinners • Film build too high • Wrong spraying technique

Area where topcoat was sanded through to substrate not isolated • isolated with unsuitable filler/primer • filler/primer incorrectly applied • insufficient drying of substrat.

Simulation software is based on the process of modeling a real phenomenon with a set of mathematical formulas. It is, essentially, a program that allows the user to observe an operation through simulation without actually performing that operation

SCADA Software Development, SCADA Software Providers in India. Get contact details and address of SCADA Software Development

Incorrect spraying viscosity, spraying technique, flash-off times between coats, and film thicknesses • defective spray gun set up • incorrect spraying pressure • temperature of paint, substrate or • spraybooth too low • incorrect choice of hardeners and thinners.

Robotic Repair Services. PSI Robotic Repair. Industrial robot repairs require the expertise of virtually all PSI service areas. They may be

ROBOTIC AUTOMATION AND CONTROLS

Process application improvement Paint defect analysis and troubleshooting, New paint shops in line process improvement New model/Parts development Materials changeover in existing paint shops Support for paint application documentation OEM approvals of new materials Color addition and improvement Technical support for production

Plc Programming Services

SUBSTRATE INSUFFICIENTLY DRIED • material not isolated • Pores not deeply sanded

NCORRECT SPRAYING PRESSURE OR VISCOSITY, SPRAYING TECHNIQUE OR APPLICATION TEMPERATURE • Unsuitable combination of solvents or low quality solvents • Insufficient sanding of substrate • Incorrect spray gun set up • Excessive temperature

RESIDUE OF SANDING WATER IN CORNERS, EDGES, REBATES AND BELOW DECORATIVE STRIPS • Contaminated air supply • Insufficient isolation of polyesters • Air humidity too high • Waterborne products not completely flashed off/cured

Offering Machinery AMC Services, Amc Service, Amc Service Provider,

DIGITAL PRODUCTION CONTROL SYSTEM

CHEMICALS RELEASED INTO ATMOSPHERE REACTING WITH HYDROCARBONS IN THE AIR • Visible as rain drops on surface in areas where mixture is strong • Can cause unrepairable damage