Statcon Energiaa Private Limited Sector 63, Noida, Uttar Pradesh

Special Features: Temperature Compensation for VRLA Battery Automatic Float & Boost voltage setting on selection of Battery type & number of cells Automatic Float to Boost and Boost to Float changeover current setting on selection of Battery AH capacity Battery health test facility AC/DC Voltage & Current calibrations Voltage Regulation : Within ±1% according to variation of Input AC mains supply & 0 to 100% Load variation (Diode drop excluded)

A mobile rectifier battery charger that we provide our customers with is made with the use of the best quality raw materials. Our company Statcon Energiaa is well-known in the market as one of the best manufacturers, suppliers and exporter of mobile battery chargers that can automatically charge a mobile phone's battery when the power of the battery is low. We store our products in our warehouses that are spacious and make sure that the products are kept in good condition. We test all our products before supplying it to the customers to ensure that it meets the needs of our customers and clients. Today people use mobile phones to a great extend. These have become an integral part of people's lives and therefore they need to be changed frequently depending on the usage. Battery charges come as trickle, simple, timer-based, intelligent, universal battery charger analyser, pulse, can’t, USB based, inductive, solar chargers and motion powered chargers. These battery chargers also vary based on the application like the battery charger for a vehicle, mobile phone chargers, charge station and electric vehicle battery chargers Charging Methods The charging methods are classified into two different types, one is the fast charge method and the second is the slow charging method. Fast charging is the method in which the battery takes around two hours or sometimes less than this to be fully charged. In the case of slow charging methods, the system takes a long time to be fully charged. The slow charging method is extremely beneficial as it does not need any charge detection circuit. Also, this is extremely cheap. Auto-Turn Off Charger Battery The chargers that we have can be turned off automatically by using the auto turn off charger battery option. This automatically disconnects the battery from the mains when the battery is charged fully. This system is used partially to discharge cells as well. The circuit is simple and consists of an Alternating circuit and direct circuit, relay drivers and charge stations. The Charger Circuit In an alternating current and direct current converter section, the transformer step-downs the available alternating current supply to 9v AC at 75o mA that is rectified by using a full-wave rectifier and then filtered by the capacitor. The 12v DC charging voltage is provided by the regulator and when the switch S1 is pressed, the charger starts working and the power-on LED glows to indicate the charger is on. The relay driver section consists of PNP transistors to energize the electromagnetic relay. This relay is connected to the collector of the first transistor and it is driven by a second PNP transistor which in turn is driven by the PNP transistor. In the charging sector, the regulator IC is biased to give about 7.35V. To adjust the bias voltage, present VR1 is used. A D6 diode is connected between the output of the IC and a limited output voltage of the battery up to 6.7V is used for charging the battery. Choose us and get our mobile rectifier battery charger at an affordable price for your need. We ensure that our customers and clients get the best from us. Therefore choose us and get our products without any delay.

Application : Charging

Statcon Energiaa offers highly reliable and rugged Industrial Battery Charger solutions for all DC power supply applications. We have made our presence felt with Power generation, T&D, Defence, Telecom, Oil & Gas, Railways and other industrial applications. These Industrial Battery Chargers are available in both natural cooled as well as forced cooled designs.With in-house transformer manufacturing, fitting and wiring facilities, we maintain strict quality control over the whole process. The team of designers, with documentation personnel, help in supplying custom-built solutions to all Rectifier/Battery charging needs.Built over glass epoxy board, the control circuit uses advanced Digital and analog circuit blocks and suitable customization is done for all special application of the user. The special design feature of our Industrial battery charger is high transient response under specified load & line variations.Statcon Energiaa offers various charger configurations like Float-cum-Boost Charger with dropper diodes, Dual Redundant Systems, Float & Float Cum Boost Charger, Dual Float-Cum-Float Boost Charger System and Multiple charger system with redundant (standby) charger etc.However, needs of proper battery charging are always kept in mind to get the best state of charge and life of the battery bank used.

Input Voltage : 230V ± 15%, 415 ± 15%, 50 Hz

Output Voltage : 24V/36V/48V/96V110V/220V Nominal (Other Voltages also possible on request)

 energiaa's eco-hbd range of solar hybrid inverters is the no.1 trusted hybrid solar technology in the indian market. active front end technology enables it to store the renewable solar energy in the battery as well as export any excess solar power generated, to the grid through net meter, resulting in improved savings at consumer end. technological partnership between world leading australian software and statcon energiaa's experience in industrial grade designing has resulted in eco-hbd range, setting a benchmark for the solar inverter market. high level of flexibility in the form of configurable set points gives the eco-hbd series an unparalleled level of control over the inverters' parameters. customisability of settings makes it the ideal product for solar applications like process industries or telecom bts where each site has a different grid condition.easy to connect xenius remote monitoring box, comes with 5 year internet charge and sim included. remotely control your eco-hbd inverter and view system parameters with interactive graphical options.

Number Of Flower : Hybrid Solar Inverter

Brand Name : Statcon Energiaa

Condition : New

Capacity : 48V/96V/120V/240V/360V/480V/550V

Brand Name : Statcon Energiaa

Output Frequency : 50 Hz

Degree of Protection : IP 21

Input Voltage : 230 +10% -20%

Number Of Flower : Mppt Based

At Statcon Energiaa based in Uttar Pradesh, We are a leading three phase solar inverter supplier. We manufacture our goods in our company under the supervision of experts and professionals of our company. Our team members have years of experience and hold expertise in this field. They ensure that the products that we manufacture meet the needs of our customers and clients. We always deliver our products on time and therefore are known as the best three phases solar inverter supplier in India.     People usually have a lot of questions when buying a three phases solar inverter. Today we are going to solve all your problems and answer all the questions. We will also tell you why you should invest in the three phases of solar inverter that we have listed on our website.     The first question that usually comes to one's mind is,     Should You Buy Three Phase Solar Inverter?     The answer is yes. The three phase solar inverter of our company has some amazing benefits. These might be a bit costly than the single phase solar inverters but these offer you amazing results and benefits     Advantages Of Three Phase Inverters     The main advantage of a three phase solar inverter is that it can convert the solar energy to alternating current that is fed evenly into the property all over three phases. For instance, if you have a single phase solar inverter of 5KW, the maximum capacity will be feeding 5KW of solar power into one phase but a three phase solar inverter of 5KW with the same conditions will feed the power into three phases, that is, 5 KW divided by three.     This is extremely crucial for the solar inverter systems that are larger as if all the power that is created is fed down to one single phase it will be too hard for the single phase and will slowly create an unbalance between the loading of the phases. The solar investors that are 5KW do not have this problem because 5KW power in one single phase doesn’t cause any problem.     When To Get A 3-5KW Three Phases Solar Inverter?     After knowing the benefits of the three phases solar inverter we understand that these investors feed power to your overall property all around the three phases. At times the single phase 3-5 KW inverter might not work well or it can if there is a low light condition but still you may face some difficulties at times. This is one of the most annoying things when the solar power systems do not produce anything when they are supposed to do their work the best way possible. This usually happens when there is a problem of resistance in the power cables of the property.     Therefore contact us and get our three phases solar inverter for your use. We are the number one company selling the best to our customers and clients at an affordable price. We are the best three phasessolar inverter suppliers, in the country and we ensure that we provide our customers with only the best products at an affordable price.

Application : Industrial, Office

Feature : Easy To Oprate

Output Type : 220V

Frequency : 50hz

Automatic Grade : Automatic

We offer a wide range of Array Junction Boxes, String Monitoring Boxes, and DC Fuse Boxes suitable for combining PV panel strings at various levels.These combiner boxes can easily handle high voltage PV strings and give on-line current data of each string used to reliably detect reduced generation or failure of any string.The product is 100% customizable and is suitable for harsh weather conditions.Special Features: Monitoring of up to 24 strings in a single box 100% customisable as per requirement Can be manufactured under other brand names Approved for all safety and performance standards Supplied to over 1000 MW capacity plants in India Now 1500V DC version also available No Limitation on current monitored Self Powered models available

Material : Metal

Shape : Rectangular

Feature : Flameproof

Finishing : Coated

Application : Suitable for Harsh Weather Conditions

Special Features: IP65 grade for outdoor use MPPT with unbalanced I/P power management Dual MPPT with Independent tracking State Of The Art Italian Technology Touchscreen Display: Incredibly responsive touchscreen display Accessible even after sunset Inbuilt data Logger Graphic Icons for clear readability Multi-inverter readings on one display Real time monitoring Instant data Log transfer feature through USB pen drive Additional Features: Intelligent power management system Suitable for installations with reduced string size Web based remote monitoring available

Feature : Low Maintainance

Automatic Grade : Automatic

MPPT stands on Maximum Power Point Tracking .It extracts additional power from your PV array, under certain conditions.The function of a MPPT is analogous to the transmission in a car. When the transmission is in the wrong gear, the wheels do not receive maximum power. That’s because the engine is running either slower or faster than its ideal speed range. The purpose of the transmission is to couple the engine to the wheels, in a way that lets the engine run in a favourable speed range in spite of varying acceleration and terrain.Let’s compare a PV module to a car engine. Its voltage is analogous to engine speed. It’s ideal voltage is that at which it can put out maximum power. This is called its maximum power point. (It’s also called peak power voltage, abbreviated Vpp). Vpp varies with sunlight intensity and with solar cell temperature.System Monitoring:SCC has provision to connect radiation sensor, module surface temp sensor, ambient temp sensor, Vibration sensor for whether monitoring. Data of all sensors will be available for monitoring in data logger as well as remotely over GPRS.All the relevant parameters of charge controller should be available for remote monitoring over internet using GPRS based monitoring solution.Special Features: ERRU/Auxiliary Power Supply : MPPT Solar Charge controller can be synchronized with coach existing ERRU or Auxiliary power supply External Sensors Compatibility : Sensors like Radiation, Surface temperature, Wind, Ambient temperature, Humidity, Vibration can be connected USB/SD-Card Storage : All parameters will be logged locally in Pen drive/ SD-cards Web Base Monitoring : Generation and all other parameters can be remotely accessed through web-based software on PC/Laptop  

Application : Battery Charging

Application : Railway Coaches

MPPT for higher Solar generation Run your heavy loads hassle free Industrial Grade Inverter for rugged use Set Priority Mode as per backup WiFi, GPRS compatible Fast DSP control algorithms

Number Of Flower : Solar Inverter, Off Grid Solar System

Certification : ISO 9001:2008

Application : Home, Industrial, Office

Feature : Easy To Oprate, Low Maintainance, Low Voltage Indication, Suitable For Indoor And Outdoor, Trolly Structure

Condition : New

Output Type : 220V, 240

Input Voltage : 220V

Frequency : 50hz

Automatic Grade : Manual, Semi Automatic

Driven Type : Solar

Total Carbohydrate : 2year

Power Capacity : 10kv, 1kv, 3kv, 5kv, 7kv

Brand Name : Statcon Energiaa

Country of Origin : India

Certificate : BIS, SAFTEY, ISO.

ess pegasus li+ series add solar when required runs your 1.5t ac for more than 2 hours scheduling features for load shifting li ion battery for high performance faster charging rate and low discharging rate. no memory effect & environment friendly. excellent high temperature performance. at 25 °c, cycle life is more than 2500 cycles excellent customer service

Number Of Flower : Solar Energy Storage System

Material : Metal

Application : Solar Storage System, RESIDENTIAL

Variety : Cabinet

Feature : For Renal. ICU And Other Patients Who Are Weakened By Illness And Or Medical Intervention.

Solar energy storage system : 4kwp

Country of Origin : India

The brand new self-sustainable Containerized Solar PV Solution by Statcon Energiaa provides a ready-made alternative for the common problem of power supply to remote and far-flung areas. The containerised hybrid Solar PV solution can generate around 10,000 kWh/year.Built on a 20 feet standard marine container, this mobile office space provides electricity 24 x 7 without grid connection with a power capacity which ranges from 4 to 8 kWp from solar panels on the top of the container and a battery that can provide a backup for upto four hours (depending upon the load).The panels are fitted so that they also provide shade to the container thus helping in temperate control inside. The system can work as a grid tied system where power is available and it can act as an off-grid system where grid is not available.Such solutions can provide stable power for the basic needs of life and improve the living conditions. Some of it’s potential applications are: Doctors clinic Health screening by Para-medics Cold storage of milk, vegetables and fish before collection Vaccination centre Centre for disaster management Water purification systems It provides stable power that will fulfil basic needs and improve living conditions of people in rural and remote areas in India and other developing nations. It can be quickly set up and put into operation on other sites that have no grid or very poor grid availability.

Battery Type : Tubular gel; Lithium Ion

PV systems on remote C&I buildings represent distributed power generation at its best close-to-consumption point. For these applications StatconEnergiaa’s latest Solar Central Inverters with inbuilt Power Transformers offer full flexibility to be used with Grid Supply as well as Diesel/ Bio Generators*. Inbuilt Power Transformer ensures reliable operation for remote sites where grid supply may be poor along with metering, switchgear and multi door indoor cabinet. This is also beneficial as energy transmission demand and losses in the grid are also reduced.Salient Features: Works with Poly, Mono as well as Bifacial Photovoltaic Modules Multi MPPT design for better PV generation. Can synchronize with Grid Supply as well as Diesel/ Biogas/ Biomass Generators Inbuilt Power Transformer for better reliability. Multi Door Indoor Cabinet with separate access for user connections and Electronics. Inbuilt Metering in PV as well as Grid Path Monitoring of data through MODBUS 485 port. Graphical display with keypad for user Interface. Displayed Parameters: Displays PV Voltage, PV current, PV Power PV Energy on front Panel. Displays Grid Voltage, current and Power. Separate Energy Meters for Solar, Grid and Biogas/ Diesel Generator. Displays Mode of Operation, faults and stored past data. *NOTE: These systems are grid connected Solar Inverters and can only work when Photovoltaic modules are connected at input and AC source (Grid/ Generator) is available. These systems cannot be used for backup applications.

Feature : Easy To Oprate

Frequency : 60hz

Automatic Grade : Automatic

Driven Type : Solar

Application : For Photovoltaic Application

A Power supply system is at the heart of telecom systems & electronic equipments. For reliable installation of telecom assets, reliable power supply system is of utmost importance.In an AC electrified area, the main power is derived from the traction supply. This supply is very reliable but its occasional interruption/low voltage can’t be ruled out.In non-electrified areas, the main supply is obtained from commercial power supply. The source of power supply is through a rural feeder, which is quite unreliable in respect of its availability and voltage. A battery backup is provided in the DC circuit, which requires even more maintenance.The function of SMPS Power Supply system is to provide a stable and reliable AC and DC power supply to the telecom installations against mains supply variations or interruptions.The SMPS Power Plant for Indian Railway telecom circuits shall be manufactured as per RDSO’s Specification NO. RDSO/SPN/TL/23/99.This power plant can work either with VRLA or Conventional Lead Acid Battery. The system including FR/FC or FR/BC modules shall be suitable for operation from AC mains or from a DG set. We are one of the few RDSO-approved source to supply 48V SMPS Power Plant in (N+1) or (N+2) configuration with ultimate capacity of 150Amp. Special Features: The FR-FC or FR-BC modules shall be housed in (n+1) or (n+2) parallel configuration in a single rack where ‘n’ is the actual required number of FR-FC, FR-BC modules for meeting the particular load requirement. Power Plant shall consist of a Distribution-Switching-ControlAlarm Arrangement (DSCA) and Float Rectifier-cum-Chargers (FRFCs) or Float Rectifier cum Boost Chargers (FR-BCs). The Power Plant shall be capable of meeting the load requirement (equipment and battery bank) for various telecom equipments. The system shall be expandable at rack level itself, using the basic modules of the same rating. To cater for higher load requirements, same type of FR-FCs or FR-BCs mounted in the same rack shall be capable of working in parallel load sharing arrangement. The Power Plant including FR-FC or FR-BC modules shall be suitable for operation from AC Mains or from a DG Set.

Number Of Flower : Power Plant

Application : Power Generating

Automatic Grade : Automatic

Rated Power : 24V/ 48V/ 11V

Driven Type : Electric

Built with the R&D Department’s long experience in design and supply of Battery Chargers, the SMPS Technology has been developed to hold many advantages over the conventional SCR Controlled Technology such as redundancy, modular construction, efficiency, low input line current harmonics and high input line power factor.Statcon Energiaa is a reputed expert in design and manufacture of the SMPS Charger for Indian Railways.We offer complete power supply system with single battery but multiple output DC & AC Voltages using DC-DC Converter & Inverter modules.

Application : Charging

Availability : 10-20kg

Country of Origin : 220V

Power : 3-6kw

Driven : Electric

Built with the R&D Department’s 29+ years experience in design and supply of Battery Chargers, the SMPS Technology has been developed to hold many advantages over the conventional SCR Controlled Technology such as redundancy, modular construction, efficiency, low input line current harmonics and high input line power factor.It is a proven technology with more than 10,000 such modules currently working in harsh Indian environmental conditions.The incredible monitoring & control module continuously monitors input supply as well as Battery path DC Voltage & Current and gives suitable command to all modules operating in parallel.Special features: Automatic Float / Boost Changeover Constant Current/Constant Voltage Charging of Battery Output voltage settings for VRLA/Lead Acid / Ni-Cd Batter Temp compensation for VRLA Battery Battery Health Monitoring Dropper Diode Selection Lightning and surge protection at rack level. Each SMPS Module strictly meets following technical parameters.

Number Of Flower : Smps Battery Chargers

Application : Charging

Availability : 40-50kg

Power : 6-9kw

Driven : Electric

Features: Digital display with fault and energy logging Remote monitoring over internet and RS232 (Optional) Available in different capacities and battery voltages Various modes of operation to suit all types of users Available in 1/2/3/4/5/6/8 and 10 kVA and kW range Substantially Large LCD to display all parameters(units consumed daily, monthly , yearly etc.) Available in Tower Type as well as wall mounted for 1 kVA Robust industrial grade design for a long life Applications: Small Offices Rural Ares Homes/Residences Shops Government Offices Hospitals Apartments Schools Community halls

Capacity : 48V/96V/120V/240V

Total Carbohydrate : 2 Year

Model : SEOG Series

Certification : IEC 61683,IEC 60068-2-(1,2,14,30),IEC 60529 (IP 21)

Brand Name : Statcon

Number Of Flower : Mppt Based

 energiaa's eco-hbd range of solar hybrid inverters is the no.1 trusted hybrid solar technology in the indian market. active front end technology enables it to store the renewable solar energy in the battery as well as export any excess solar power generated, to the grid through net meter, resulting in improved savings at consumer end. technological partnership between world leading australian software and statcon energiaa's experience in industrial grade designing has resulted in eco-hbd range, setting a benchmark for the solar inverter market. high level of flexibility in the form of configurable set points gives the eco-hbd series an unparalleled level of control over the inverters' parameters. customisability of settings makes it the ideal product for solar applications like process industries or telecom bts where each site has a different grid condition.easy to connect xenius remote monitoring box, comes with 5 year internet charge and sim included. remotely control your eco-hbd inverter and view system parameters with interactive graphical options.

Application : Office Building, Residential, Mini Grids, Cold Storage, Process Industries

Input Connection Type : Terminal

Capacity : 48V/96V/120V/240V

Output Frequency : 50 Hz

Brand Name : Statcon Energiaa

Degree of Protection : IP 21

Input Voltage : 230 +10% -20%

Number Of Flower : Mppt Based

Statcon Energiaa is one of the best single phase solar inverter manufacturers in Uttar Pradesh, India. Single phase solar inverter has been a highly popular choice for a decade and they are still one of the most popular choices today. The single phase solar inverter of our company are reliable and cost-saving. These make them a great value for the money. The single phase solar inverter operates almost identical to a twelve-volt car battery. These inverters take power from the electric current and then converts the direct current that is sent to the electrical panel. The stored energy is always available to you for your use. You can use it whenever you want. The advantage of single phase inverters is that they help you save money over the life of the unit. Using just one unit instead of two or more will reduce the electricity bill that one has to pay every month. The single phase batteries allow you to use energy even when there is no sunlight, provided the battery is charged. Following are some of the befits of the single phase solar inverter that we provide to our customers. Small And Compact The first thing that attracts most of our customers to choose a single phase solar inverter is that these inverters are built with a modern design. These are small and compact and can fit any space in your house. These can also be installed quite easily. It is environmentally friendly compared to the other run of the mill inverters and units available in the market. The battery parts last longer. As the inverter first takes the power directly from the battery and charges them up before feeding them into the main circuit, this also means that there are lesser parts that can be damaged easily. Easy To Install The single phase solar inverter of our company are easy to install and simple to use. These are just easy as disconnecting the wires from the wall or removing an old battery. Always make sure that the new battery that you are choosing meets the size that you need correctly. After you have made the connection, connect the wires to the wall and the work is complete. This is the best solution only when you need power backup. If you are thinking to eliminate the use of electricity when there is bad weather or fluctuating electricity, then this option might not work for you. The process of installing the single phase solar inverter in your house is easy and simple as mentioned. After you have connected the wires and charged the battery of the inverter, you can connect it to the power source using a wiring system. It will be ready for your use immediately. Before the start-up, you should allow some time to the battery so that it can discharge on its own. A few minutes is enough for this. We are the best single phase solar inverter manufacturer in the market today offering our customers only the best. Therefore choose us and order our products today.

Application : Industrial, Office

Feature : Easy To Oprate

Output Type : 220V

Frequency : 60hz

Automatic Grade : Automatic

Type Of Plant : Hybrid

Other Components : Battery

Capacity : 3.6kWh

Brand Name : Statcon Energiaa

The Microcontroller based Battery chargers are the outcome of the advanced power electronics based on switching technology and use of advance digital embedded systems to ensure the outstanding performance, backed by improved, systematic diagnostics.Statcon Energiaa’s Microcontroller based battery chargers are backed-up by Development Team’s 29+ years experience in the field of power electronics. The Battery chargers are widely used in the Thermal, Hydro & other Power generating Stations, Control & Instrumentation & other similar applications.The Battery charger gives the highly stable output to meet the designed load requirements on wide range of the AC input supply.The LCD Display of the charger panel provides a user friendly parameter with settings & calibration provision which are password protected.The Technology used for AC/DC conversion is thyristor based digitally controlled & is available in wide range from 24V/2000A to 220V/1000A.Special Features: Temperature Compensation for VRLA Battery Automatic Float & Boost voltage setting on selection of Battery type & number of cells Automatic Float to Boost and Boost to Float changeover current setting on selection of Battery AH capacity Battery health test facility AC/DC Voltage & Current calibrations

Application : Charging

Availability : 40-50kg

Power : 6-9kw

Driven : Electric

Country of Origin : 24V/2000A to 220V/1000A

A load bank is a device which develops an electrical load, applies the load to an electrical power source and converts or dissipates the resultant power output of the source.The purpose of a load bank is to accurately mimic the operational or “real” load that a power source will see in actual application. However, unlike the “real” load, which is likely to be dispersed, unpredictable and random in value, a load bank provides a contained, organized and fully controllable load.Consequently, a load bank can be further defined as a self-contained, unitized, systematic device that includes load elements with control and accessory devices required for operation.Whereas the “real” load is served by the power source and uses the energy output of the source for some productive purpose, the load bank serves the power source, using its energy output to test, support or protect the power source.Statcon Energiaa’s Load Bank is suitable for resistive and inductive load testing of Alternator/Generator. It is also a great asset for any repair workshop.

Feature : Easy To Install, Electrical Porcelain

Automatic Grade : Automatic

Temperature Capacity : High Temperature, Low Temperature, Medium Temperature

We offer a wide range of Intelligent Combiner Boxes suitable for combining all types of SPV  panel strings. These combiner boxes can easily handle high voltage PV strings and reliably detect  reduced  yield  or  string  failures.  Plug-and-Play  nature  of  these  string  combiners  make them the ideal solution for all MW Solar Farms.  SALIENT FEATURES : Monitoring of up to 24 string available Can be customized as per user requirements Open to manufacture under your brand name No need of special communication cable Excellent performance upto 55°C MC4, diodes, SPD at O/P &  RS 485, mounting type (all customizable) Monitoring of string current, bus voltage, Power, cabinet temperature,SPD status, S/W status Configurable analog / digital inputs and outputs MODBUS over RS 485 communication Self Powered / Auxiliary Power Supply

Material : Metal

Shape : Rectangular

Feature : Flameproof

Finishing : Coated

Statcon Energiaa’s Rotary Frequency Converters are designed to meet the rugged but specific AC power requirements in different frequency ranges. It can be used to convert 50Hz/60Hz into any other frequency of 50Hz/60Hz/100Hz/200Hz or 400Hz.The Rotary Frequency Converters (RFCs) are designed and manufactured using the company’s rich experience in Rotary Machine Controllers, Power Electronics and Ground Power Unit. It uses DC motor with digital control for the prime mover while brush-less alternator is used to get AC output of a desired frequency and voltage.Statcon Energiaa’s RFCs are available in fixed skid mounted and wheel mounted trolley and is supplied with suitable cable and aircraft connectors.The laminated Yoke DC motor is driven through precision SCR controlled DC drive. In order to get a high degree of frequency stability the high accuracy tachogenerator is used, whose feedback is used to get very accurate speed control as well as fast transient response in case of sudden loading (say jerk load) of the RFC.Similarly, a modern state-of-the-art electronic Automatic Voltage Regulator (AVR) is used to get AC voltage regulation of RFC output. It also gives fast transient response of output voltage against transient loading.Both Rotary Pans are lightly coupled and they are provided with anti vibration pads to reduce vibration.The control and monitoring display uses microprocessor controller-based circuit, which helps in accurate sensing and monitoring of the output parameters. A provision is also there to set the tripping levels of voltage, frequency and overload with respect to the pre-filled time interval for protection and alarm annunciation.

Application : Industrial Use

Availability : 30-40kg

Feature : Long Life, Stable Performance

Function : Electric

Special Features : VFD COUPLING*: VFD Coupling at DC end controlled through PLC ACTIVE FRONT END TECHNOLOGY: Low distortion O/P at unity power factor Increased battery life by avoiding PSOC condition GRID SYNCHRONISED: Export excess PV power to grid through grid synchronisation. SCHEDULING* : Controlled scheduling via keypad or PLC BASED Battery charging according to TOD Programmable night saving mode BESS FEATURES*: Peak load shaving/ load leveling Voltage/ Frequency regulation Time shifting applications

Statcon Energiaa’s remote monitoring software has made it extremely easy to track all the key data points of your plant. It puts you in the driver seat of your renewable energy power plant so that you can monitor your:- Daily units generation Voltage Current and all other parameters on the device of your choice. The GPRS-based remote monitoring system is an intuitive tool to give you the insights you require to observe and analyse the data of your plant from any location.

Number Of Flower : Monitoring Software

Brand Name : Statcon