Number Of FlowerPlain Hole Die, Pointing Die, Extrusion & Trap Extrusion Die
Pellet MaterialTungsten Carbide
Pellet Size Range12x20mm up to 45x120mm
Tungsten Carbide Cold Heading Dies are commonly supplied in various types viz; Plain Die, Pointing Die, Extrusion and Trapped Extrusion Type. Different Special face configurations are also supplied as per the customer’s specifications. The sizes range from a Pellet size of 12x20 up to 45x120 with suitable Case & Bore sizes as per customer’s requirement.
Brands available are : PUSHUP
Tungsten Carbide Cold Heading Dies are commonly supplied in various types viz; Plain Die, Pointing Die, Extrusion and Trapped Extrusion Type. Different Special face configurations are also supplied as per the customer’s specifications. The sizes range from a Pellet size of 12x20 up to 45x120 with suitable Case & Bore sizes as per customer’s requirement.
Brands available are : PUSHUP
Number Of Flower : Plain Hole Die, Pointing Die, Extrusion & Trap Extrusion Die
HCHCr Thread Rolling Dies for Self Tapping Screws are generally supplied in the following sizes/sections to suit the customer’s standard specifications:
Dies for Wood Screw, Chip Board etc. can also be got manufactured against order.
Brands available are: ROLFAST & RADO
HCHCr Thread Rolling Dies for Self Tapping Screws are generally supplied in the following sizes/sections to suit the customer’s standard specifications:
Dies for Wood Screw, Chip Board etc. can also be got manufactured against order.
Brands available are: ROLFAST & RADO
Heat Treated Lanco Type Revolving Die Heads are available for the application to the hand operated semi automatic threading machines.
Brand Available is Nbeson
The Threading Capacity range for the Die Heads supplied is as under:
Heat Treated Lanco Type Revolving Die Heads are available for the application to the hand operated semi automatic threading machines.
Brand Available is Nbeson
The Threading Capacity range for the Die Heads supplied is as under:
Number Of FlowerGenerally Std. Hex Head Shape. Also supplied Square Head, D-Shape, T-Shape and for Flange & Collar Bolts etc. on request.
MaterialHSS / HDS
Size RangeM 3 to M 24 (1/8” to 1”)
Head Trimming Dies are available in HIGH SPEED STEEL (HSS) and HOT DIE STEEL (HDS) quality variants.
Generally these are readily available for Hex Head shape. In addition, Dies for Trimming some special Head shapes like Square Head, D shape, Flange & Collar Bolts etc. are also supplied against order.
The sizes available range from M3 to M 24 (and 1/8” to 1”) in suitable Diameters.
Brands available are :
In HSS we have PUSHUP Brand Dies generally supplied in Un Coated Form. CVD Coated Dies are also available on request.
In HDS we supply SDM Make Trimming Dies.
Head Trimming Dies are available in HIGH SPEED STEEL (HSS) and HOT DIE STEEL (HDS) quality variants.
Generally these are readily available for Hex Head shape. In addition, Dies for Trimming some special Head shapes like Square Head, D shape, Flange & Collar Bolts etc. are also supplied against order.
The sizes available range from M3 to M 24 (and 1/8” to 1”) in suitable Diameters.
Brands available are :
In HSS we have PUSHUP Brand Dies generally supplied in Un Coated Form. CVD Coated Dies are also available on request.
In HDS we supply SDM Make Trimming Dies.
Number Of Flower : Generally Std. Hex Head Shape. Also supplied Square Head, D-Shape, T-Shape and for Flange & Collar Bolts etc. on request.
MIRDON HACKSAW BLADES are available in All Hard (Low Alloy) and High Speed Steel quality variants.
HIGH SPEED STEEL TOOL BITS (Square and Round) are also available in 5% and 10% Cobalt compositions.
MATRIX Make ROUND TOOL BITS & ROUND HEAD PUNCHES (Knock Out Pins) are available in M2, M35 & T42 grades.
The sizes available range from 1x75mm up to 20x200mm for Round Bits &
From 2x50mm up to 20x150mm (with Head Dia +1mm) for Round Head Punches.
MIRDON HACKSAW BLADES are available in All Hard (Low Alloy) and High Speed Steel quality variants.
HIGH SPEED STEEL TOOL BITS (Square and Round) are also available in 5% and 10% Cobalt compositions.
MATRIX Make ROUND TOOL BITS & ROUND HEAD PUNCHES (Knock Out Pins) are available in M2, M35 & T42 grades.
The sizes available range from 1x75mm up to 20x200mm for Round Bits &
From 2x50mm up to 20x150mm (with Head Dia +1mm) for Round Head Punches.
HSS GEAR HOBS for Spur and Helical Gears in Machine Relieved and Ground Relieved profiles are available with Bore and Keyway or with End Drive Slot in Single and Multi Start pitches in M2 and M35 grades.
In addition to above, the following tools are also supplied as per customer’s specifications.
HSS Involute Gear Cutters
Gear Shaper Cutters
Chain Sprocket Hobs
Spline Hobs and
Timing Pulley Hobs
PUSH & PULL TYPE BROACHES are also available in M2 grade in Splines, Internal Hole and Keyway profiles.
Brands available are: STC/SHB
HSS GEAR HOBS for Spur and Helical Gears in Machine Relieved and Ground Relieved profiles are available with Bore and Keyway or with End Drive Slot in Single and Multi Start pitches in M2 and M35 grades.
In addition to above, the following tools are also supplied as per customer’s specifications.
HSS Involute Gear Cutters
Gear Shaper Cutters
Chain Sprocket Hobs
Spline Hobs and
Timing Pulley Hobs
PUSH & PULL TYPE BROACHES are also available in M2 grade in Splines, Internal Hole and Keyway profiles.
Brands available are: STC/SHB
Number Of FlowerDuplex Face / Simplex Face FLAT Type
Section Range4x3x1x1 to 9x8x4x1
VariantsGround Thread & Milled Thread
Regular Thread FormsISO Metrics, British Standard Whitworth (BSW/BSF), Unified (UNC/UNF) & British Association (BA) Threads
High Carbon High Chromium (HCHCr) Steel THREAD ROLLING DIES, DUPLEX/SIMPLEX FLAT RECIPROCATING TYPE are available in above sizes/sections in both Ground & Milled Thread :
Brands available are: ATM, MPT/MPT PREMIUM, AARPEE & PUSHUP in Ground Thread & ROLFAST in Milled Thread.
Generally, the Dies for Standard Screw/Bolt sizes in Metrics, ranging from M2.5 to M12 and in BSW from 1/8”BSW to 1/2" BSW are available Ex stock in suitable Die sections.
Sections higher than 9x8x4x1, Left Hand, Multi Start Threads, Knurling Threads and sizes/pitches not available Ex stock can be got manufactured against order.
Dies in High Speed Steel (HSS) are also supplied against order.
REGRINDING OF USED THREAD ROLLING DIES IS ALSO UNDERTAKEN.
High Carbon High Chromium (HCHCr) Steel THREAD ROLLING DIES, DUPLEX/SIMPLEX FLAT RECIPROCATING TYPE are available in above sizes/sections in both Ground & Milled Thread :
Brands available are: ATM, MPT/MPT PREMIUM, AARPEE & PUSHUP in Ground Thread & ROLFAST in Milled Thread.
Generally, the Dies for Standard Screw/Bolt sizes in Metrics, ranging from M2.5 to M12 and in BSW from 1/8”BSW to 1/2" BSW are available Ex stock in suitable Die sections.
Sections higher than 9x8x4x1, Left Hand, Multi Start Threads, Knurling Threads and sizes/pitches not available Ex stock can be got manufactured against order.
Dies in High Speed Steel (HSS) are also supplied against order.
REGRINDING OF USED THREAD ROLLING DIES IS ALSO UNDERTAKEN.
Material : HCHCr (High Carbon High Chromium)
Number Of Flower : Duplex Face / Simplex Face FLAT Type
ADDISON Make HSS PARALLEL & TAPER SHANK TWIST DRILLS are available in Jobber, Stub and Long Series(P/S) and Long/Extra Long Series (T/S).
HSS GROUND THREAD TAPS; viz. Hand Taps, Machine Taps & Nut Taps are also available.
NBESON Make HSS TAPS are also available.
ADDISON Make HSS PARALLEL & TAPER SHANK TWIST DRILLS are available in Jobber, Stub and Long Series(P/S) and Long/Extra Long Series (T/S).
HSS GROUND THREAD TAPS; viz. Hand Taps, Machine Taps & Nut Taps are also available.
NBESON Make HSS TAPS are also available.
DEAD CENTERS with Plain Male Point and Carbide Tipped Point are supplied against order in Standard, Stub and Extended point configurations in Morse Tapers MT-1 to MT-6.
REVOLVING (LIVE) CENTERS are available in Standard, Extra Heavy Duty, Super Extra Heavy Duty and Jumbo Extra Heavy Duty Models in Morse Tapers MT-1 to MT-7.
Brand available is TURNMAX
DEAD CENTERS with Plain Male Point and Carbide Tipped Point are supplied against order in Standard, Stub and Extended point configurations in Morse Tapers MT-1 to MT-6.
REVOLVING (LIVE) CENTERS are available in Standard, Extra Heavy Duty, Super Extra Heavy Duty and Jumbo Extra Heavy Duty Models in Morse Tapers MT-1 to MT-7.
Brand available is TURNMAX
Section RangeCDH suitable for 1/2" , 3/4", 1", 1.1/4", 1.1/2" & 2" DH and 3" x 1.3/64" & 4" x 1.3/64" for Tangential Chasers
COVENTRY DIE HEAD (CDH) CHASERS suitable for 1/2", 3/4", 1”, 1.1/4”, 1.1/2” and 2” CD Heads are available in all Standard Thread Forms.
TANGENTIAL CHASERS are generally supplied in 3”x1.3/64” and 4”x1.3/64” sections in standard metric (mm) and inch (TPI) sizes.
Brand available for the above types of chasers is NBESON.
COVENTRY DIE HEAD (CDH) CHASERS suitable for 1/2", 3/4", 1”, 1.1/4”, 1.1/2” and 2” CD Heads are available in all Standard Thread Forms.
TANGENTIAL CHASERS are generally supplied in 3”x1.3/64” and 4”x1.3/64” sections in standard metric (mm) and inch (TPI) sizes.
Brand available for the above types of chasers is NBESON.
Thread / Pitch Size0.7mm to 6.0mm & 4 TPI to 32 TPI
Std. Bore Size40mm / 54mm
Circular Thread Rolls (Cylindrical Thread Rolling Dies) for Hydraulic Machines are generally supplied in High Carbon High Chromium Steels for Thru’ Feed and In Feed Thread Rolling operations.
The range of regular sizes being supplied is as above:
The Exact Diameter of the Roll manufactured/supplied is as per the Fastener Diameter.
Brands available are : MPT/MPT PREMIUM, AARPEE
Circular Rolls in High Speed Steel (HSS) can also be got manufactured against order.
Circular Thread Rolls (Cylindrical Thread Rolling Dies) for Hydraulic Machines are generally supplied in High Carbon High Chromium Steels for Thru’ Feed and In Feed Thread Rolling operations.
The range of regular sizes being supplied is as above:
The Exact Diameter of the Roll manufactured/supplied is as per the Fastener Diameter.
Brands available are : MPT/MPT PREMIUM, AARPEE
Circular Rolls in High Speed Steel (HSS) can also be got manufactured against order.
Used for Milling Dove-Tail, V-Slots and Chamfers, three types of Angle Cutters; viz. Double Angle, Single Angle & Double Equal Angle (All Right Hand in standard practice) are supplied in the above range of sizes :
Used for Milling Dove-Tail, V-Slots and Chamfers, three types of Angle Cutters; viz. Double Angle, Single Angle & Double Equal Angle (All Right Hand in standard practice) are supplied in the above range of sizes :
More than 50 years back in 1964, Mechmeasures Corporation was initially set up at a small level by our MD Mr. R.C. Narang in Patiala, Punjab, India. At those times, when commuting and communication services were not that advanced, he traveled well and worked passionately with all his know-how and expertise to establish a strong marketing network. Under his dynamic leadership, today we are well known across the country as one of the leading suppliers of Threading & Cutting Tools. Our product range includes : Thread Rolling Dies Flat & Circular for Bolts & Machine Screws (both Ground & Milled Thread), Thread Rolling Dies for Self Tapping Screws, TC Cold Heading Dies, HSS & Hot Die Steel Head Trimming Dies and Name Punches, etc., HSS Metal Slitting Saws, Side & Face Cutters, Coventry Die Head & Tangential Chasers, HSS Drills & Taps, Hacksaw Blades, Tool Bits and Revolving & Dead Centres, etc. We cater to Fasteners, Cycle Parts, Auto, Indian Railways, and other allied mechanical industries. Why Us? At Mechmeasures our earnest endeavor is to provide Customer Satisfaction through prompt service and systematic order processing. We take pride in having an excellent track record to communicate with our clients in a very diligent and polite manner. Our expert staff guides you in the best of technical and commercial ways. We offer the best of brands and never compromise on the quality of our products and therefore we provide the best to our customers. Due to the following reasons, we are a preferred firm. • Effective communication • Quality Brands • Secure packaging • Timely compliance For more details please feel free to contact us.
Reviews & Ratings
Write a Review
Post Free Ad