Auro Controls Private Limited Karve Road, Pune, Maharashtra

Vertical switch as per application. Switching action can be reversed by removing the float, inverting & refitting it on the stem. Standard mounting is M10 and can be customized to M16 as per application. Versions can be directly interfaced with contactor loads. Switches can also be customized for multiple switching options as per user & application demand. Devices are available in full SS construction, with stem & float In SS ,or hybrid version of SS Stem and plastic floats . Plastic floats can be made available in Nylon or Polypropylene as per application demands.

Thermal switch produced with Rhodium contact material, designed to range from moderate currents and voltages through to high voltage, high current switching.

Thermal overload protector the well proven snap-action principle, the V1 Series thermostat combines insert moulded construction with robust metal parts to provide an extremely versatile and reliable control. Available with or without a cover, the thermostat is offered in both normally open and normally closed configurations.

K or J Type Thermocouples or PT100 RTD Sensor Up to 750m line-of-site range (depending on receiver) Five year battery life at 10 second transmission update rate 6mm stainless steel sheath Simple DIL switch pairing with the single or five-channel receiver

For liquid or gas use Full range of sizes from 3/8" to 2" (BSP) 2 port, normally open (NO) and normally closed (NC) versions 24Vdc, 110Vac and 230Vac operations available Brass body

Universal input/output- user selectable mA, Voltage, Thermocouple & RTD inputs Dual Output unit available see Dualcon Selectable mA or Voltage output Isolated Transmitter Supply Only 12.5mm Wide on DIN rail

Reed relays in both form A and B contact configurations, this proven design is fully approved to MIL standards of bump, shock and vibration and features one of Crydom’s in-house manufactured, high vacuum reed switches for unsurpassed RF performance and reliability.

5kV Isolation Low Contact Resistance High Power Switching PCB Mount Flying Lead HV connection

Level ranges from 1mWG to 10 mWG Various outputs including Volts and mA. Accuracy

Point switches a specific band to obtain desired switching levels .The level sensors are available in full SS construction or hybrid version of SS stem and plastic float.The SS stem construction ensures along reach within the tank .Options for SS plastic floats ensures highsensing accuracy for given application. The assembly is provided with two hex nuts and washers for on site level adjustment. Mounting is M10 thread which can be customized to M16 on demand

Liquid level switches of cable end float switches are designed for controlling levels in large tanks, cisterns or reservoirs and can be directly installed on submersible pumps. The casing is manufactured in blow moulded Polyethylene (PEHD), with 5m PVC cable with protective earth conductor as standard. The switching element is a microswitch, with UL, VDE and CENELEC approvals, activated by a moving stainless steel ball and having an electrical life of 200,000 operations. Non hygroscopic closed cell expanded polyurethane is injected around the switch housing within the outer casing, hermetically sealing the unit. These switches are capable of working down to 100 metres depth in water.

External fitting via 1/2"BSP SS 316 float Compact design Operates at up to 120ºC

Liquid level sensor The drop float actuator allows the switch housing and float pivots to be located above the surface of the liquid and provides normally closed switch contact, opening as the liquid level rises. They are manufactured in a variety of materials, with a choice of gasket materials, to suit most commonly used liquids.

Level ranges from 1mWG to 10 mWG Various outputs including Volts and mA. Accuracy

15mm & 22mm tube versions Low flow version available WRAS approval Temperature rated to 85ºC (185ºF)

Float sensor are compact vertically mounted devices with a single switch point. Mounting is in the top or bottom of the tank from the inside, so requires access to the inside of the Typical applications include printing systems and chemical dosing equipment.

Cable suspended float switch use in non-turbulent water,with faily constant ambient temperature, such as in indoor tanks or covered reservoirs. The switching element is a microswitch, having UL, VDE and CENELEC approvals, with either 10 or 20 Amp contacts, activated by a moving stainless ball and having an electrical life of 200,000 operations.

Cable float level switch X in turbulent industrial fluids and fluids with suspended agglomerates, such as sewer water.The switch is water resistant up to a depth of 100m, and is insensitive to humidity and condensation, due to the particular design of the switch element. This makes it suitable for applications where there may be wide or rapid fluctuations in ambient or fluid temperatures. Switching capacity of this new design of self-cleaning switch element is 10A at 250V ac