Electrical Conduit Fitting Dealers in Khadakwasla, Pune

Cable tray system is used to support insulated electric cables used for power distribution and communication. Cable trays are used as an alternative to open wiring or electrical conduit systems, and are commonly used for cable management in commercial and industrial construction. They are especially useful in situations where changes to a wiring system are anticipated, since new cables can be installed by laying them in the tray, instead of pulling them through a pipe.Cable Trays are available in different sizes as per the customer specifications. SS Industries is the leading in manufacturing perforated and ladder – type trays with accessories. We manufacture cable trays in the following thicknesses – 1.2 mm, 1.5 mm. 1.6 mm, 2.0 mm. 2.5 mm, and 3.0 mm & width – 50 mm to 1000 mm, cable trays are available in different finishes like Hot dip galvanized. Pre galvanized, powder coated. painted etc.The cable tray accessories for perforated ladder type cable trays are vertical bends, horizontal bends, inside bends. outside bends, reducers with radius 300. 600. 900 are avaialble.   GENERAL SPECIFICATIONS OF CABLE TRAYS • Material Of :GI Sheet, MS Sheet. SS Sheet, 1.2mm. 1.6mm, 2mm, 2.5mm • Construction (Depending On Size 8 Thick)• Surface Finish : Hot Dip Galvanizing, Pre Galvanizing Painted, Power Coated,• With 7 Tank Pretreatment• Size : 25mm To l250mmwidh. 25mm To 150mm Height• TEST : Thickness Test, Galvanizing Test 8 Powder Coat Test.   Cable trays are used for all types of wiring: • Telecommunication Wiring (LAN Cables, E1, etc.)• High Voltage Power Lines.• Power Distribution Cables• Sensitive Control Wiring• Optical Cables   TYPES OF CABLE TRAYS: • Ladder Type Cable Trays• Perforated Type Cable Trays• Raceway Type Cable Trays• Trunking Type Cable Trays

Deep Junction Box, MCC Panel, Heavy Duty Electronic Boxes, Electronic Boxe

A Cable Tray System is used in the Electrical Wiring of Buildings to support insulated Electric Cables used for Power Distribution and Communication. Cable Trays are used as an Alternative to open wiring or Electrical Conduit Systems and are commonly used for cable management in Commercial and Industrial Construction. We provide our clients a Wide Range Of Cable Trays which are available in a wide variety of Quality Metals and Finishes. These Cable Trays are made of Mild Steel, Pre-Galvanised Steel & Stainless Steel. These Cable Trays can be used in Stores and Dwellings. Our range of Cable Trays includes Perforated Cable Trays, Steel Ladder Type Cable Trays, Flooring Raceway, Trunking and Cable Tray Accessories. This Range is renowned for varied features such as Resistance to Corrosion, Strength And Durability. We also Offer customised Options as per the clients requirement.

EXTREME MAKE Wire Mesh Cable Trays are made of Materials like M.S, S.S, FRP, GI, Aluminium, Hot Dip Galvanized etc. and of Different Types like, Ladder, Perforated, Punched Fabricated Types & Customised Cable Raceways. Availbale in the Sizes Up to 50mm to 750mm which can be used for indoor Applications & Instrumentation Cable Layings.

We are listed at the apex in the list of the renowned Cable Trays Exporters from India. The Aluminum Cable Trays offered by is are made up of high grade materials like M.S, S.S, FRP, GI, Aluminum Hot dip Galvanized etc. and are available in various types like Ladder, Perforated, Punched Fabricated trays, & customized Cable Race Ways. The Perforated MS Cable Trays are available in sizes up to 50mm to 750mm to meet the indoor applications & Instrumentation cable laying and the ladder type trays are available in sizes up to150mm to 1200mm to meet the outdoor & heavily loaded areas. Further to meet the requirements of the clients, Stainless Steel Cable offered by us complies with the specifications of NES (National Electric Codes) & NEMA (National Electric Manufacturers Association). Extreme Product Range FOR Trays Stainless Steel Perforated & Ladder Cable Trays of all sizes Mild Steel Perforated & Ladder Cable Trays of all types Hot Dip Galvanized Perforated & Ladder Cable Trays of all sizes Perforated & Ladder Cable Trays of all sizes manufactured from pre-galvanized sheetsMild Steel Painted Perforated & Ladder Cable Trays of all sizes Aluminum Perforated & Ladder of all sizes Special supporting systems All FRP coated Cable Trays Cable Race ways & Trunking Wire Type Cable Trays Material used in maufacturing of EXTREME MAKE Cable Trays Mild Steel - Generally used in all types of plants with proper coatings Aluminum - Petrochemical plants, Chemical plants, Paper mills & Marine environment Stainless Steel - All corrosive environment.Fibre Glass Reinforced Plastics - In corrosive and high risk & inflammable environment CODES & STANDARDS : International Standards. Complying with the specifications of NES (National Electric Codes) & NEMA (National Electric Manufacturers Association) Material finish Steel : As per IS 1079 Gr �O� and IS 2062.Aluminium Anodizing test : As per IS 1868 of 1982Galvanizing : As per IS 2629 / IS 4759 / BS 729 ASTM 123 & ASTM A386

We manufacture Box Type Cable Trays, which are available in various sizes to suit the needs and requirements of our customers. The main purpose of these Box Type Cable Trays is in towers, especially for plugging of cables. These are manufactured using superior quality raw material to ensure excellent performance.

Cable Channel, Binding Tape, Cable Gland, Cable Saddle, Cable Tie

GRP Cable Trays, Wire Trays, PVC Wiring Channels, PVC Cable Duc

Ladder Type Cable Trays, Electrical Audit Servic

Cable tray system is used to support insulated electric cables used for power distribution and communication. Cable trays are used as an alternative to open wiring or electrical conduit systems, and are commonly used for cable management in commercial and industrial construction. They are especially useful in situations where changes to a wiring system are anticipated, since new cables can be installed by laying them in the tray, instead of pulling them through a pipe.Cable Trays are available in different sizes as per the customer specifications. SS Industries is the leading in manufacturing perforated and ladder – type trays with accessories. We manufacture cable trays in the following thicknesses – 1.2 mm, 1.5 mm. 1.6 mm, 2.0 mm. 2.5 mm, and 3.0 mm & width – 50 mm to 1000 mm, cable trays are available in different finishes like Hot dip galvanized. Pre galvanized, powder coated. painted etc.The cable tray accessories for perforated ladder type cable trays are vertical bends, horizontal bends, inside bends. outside bends, reducers with radius 300. 600. 900 are avaialble.   GENERAL SPECIFICATIONS OF CABLE TRAYS Material Of :GI Sheet, MS Sheet. SS Sheet, 1.2mm. 1.6mm, 2mm, 2.5mm Construction (Depending On Size 8 Thick) Surface Finish : Hot Dip Galvanizing, Pre Galvanizing Painted, Power Coated,With 7 Tank Pretreatment Size : 25mm To l250mmwidh. 25mm To 150mm Height TEST : Thickness Test, Galvanizing Test 8 Powder Coat Test. Cable trays are used for all types of wiring: Telecommunication Wiring (LAN Cables, E1, etc.) High Voltage Power Lines. Power Distribution Cables Sensitive Control Wiring Optical Cables TYPES OF CABLE TRAYS: Ladder Type Cable Trays Perforated Type Cable Trays Raceway Type Cable Trays Trunking Type Cable Trays

Ladder Type Cable Trays, Cable Tray, Cable Tray Accessorie

Channel Cable Tray, Support Bracket, Power Cable Harnes

Connectors, Clamp

Connectors, Electrical Connector, Clamps, Crimping Machines, Steel Spacer

Ladder Cable Tray, Cable Tray Support System, Perforated Cable Tra

Gi Cable Trays, Galvanized Silo Storage System, Cable Tray Accessorie

Connectors, Cable Assemblie

Cable Trays, Earthing Material, Erection Materia

Connectors, Exclusive Range High Quality Hand Tools, Ratchet Wrench Tool Ki

Ladder Type Cable Trays, Copper Earthing Bar, Gi Pipe Electrod

M S Cable Tray, Seeds Storage Silo Syste

Cable Trays, Earthing Material, Erection Materia