Endeavour Technologies Akurdi, Pune, Maharashtra

GST Number : 27AYDPR2668G1Z4
Contact Supplier Request A Quote
  • Universal Tester

    Universal Tester

    30,000 / Piece

    • MOQ1 Number Piece(s)
    • Precision0.01 mm
    • Display Size1.8
    • Battery Life3000 hrs
    • Display ModeMay be switched to inch or metric
    • ItemGood working condition
    • Included in delivery -Metric version Universal 3D-Sensor with clamping shank 20 mm, short probe tip 4 mm -Inch version Universal 3D-Sensor with clamping shank 3/4', short probe tip 0.2'   Technical data subject to change without prior notice. Probe tips The sensors can be equipped with a short (ball 4 mm / 0.2") and a long (ball 8 mm / 0.4") probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed. The probe tips of course are compatible to all HAIMER 3D-Sensors.
    ...more
  • Universal Tester

    Universal Tester

    30,000 / Piece

    1 Number Piece(s) (MOQ)

    Included in delivery -Metric version Universal 3D-Sensor with clamping shank 20 mm, short probe tip 4 mm -Inch version Universal 3D-Sensor with clamping shank 3/4', short probe tip 0.2'   Technical data subject to change without prior notice. Probe tips The sensors can be equipped with a short (ball 4 mm / 0.2") and a long (ball 8 mm / 0.4") probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed. The probe tips of course are compatible to all HAIMER 3D-Sensors.

    ...more
    Get Best Price
  • U Drill

    U Drill

    3,000 /

    • MaterialStainless Steel
    • Drill Diameter20 mm
    • Material GradeZCC CT U Drill Bit
    • ColorSilver
    • BrandPramet
    • Cutting AngleOverall Length140mm,Shank Diameter 25mm
    • UsageDrilling Machine
    • Packaging TypeBox,Courier
    • Length70-100 mm
    ...more
  • U Drill

    U Drill

    3,000 /

    Material : Stainless Steel

    Get Best Price
  • Tool Dynamic TD Economic Modular Balancing System

    Tool Dynamic TD Economic Modular Balancing System

    Get Latest Price

    • MOQ1 Unit piece
    • Availability450 Kg
    • Brand NameHaimer
    • Dimensions500 x 1500 x 820 mm
    • Spindle Speed300-1100 rpm
    • Measuring AccuracyLess than 0,5 gmm
    • Power Requirement230 V, 50-60 Hz
    • Power Usage0.4 kW
    • Compressed Air6 bar
    • Max Tool Length400-700 mm
    • Max Tool Diameter380-425 mm
    • Max Tool Weight30 Kg
    • Balancing machine to balance tool holders on 1 plane The Tool Dynamic TD Economic is your start into the modular balancing system of the Tool Dynamic series. The TD Economic measures and compensates the unbalance in one plane (static). Therefore it is perfect for balancing short tool holders and tools because of the couple unbalance being very low. The device is operated via the integrated keyboard and screen. Technical data subject to change without prior notice.HAIMER balancing adapter with automatic clamping m precise clamping for highest measuring accuracy and repeatability Easy and quickest changing due to compact design. A re-calibration of the machine is not necessary Equipment Base made of polymer concrete Highest measuring accuracy due to heavy base User interface Integrated user interface for easy handling of the machine Optical indexing help Indication of the exact spindle angle position on display Laser marking Indicates the position of unbalance and correction with a laser Print label Print balancing result on label Drilling radial Balancing by drilling radially Software for compensation with balancing rings Balancing by rings or other movable weights Index balancing Compensation of measuring errors by index balancing (2 measuring runs, indexing angle 180 Degree) Balancing with spindle compensation Quick and precise measuring of repetition parts (single measuring run) Balancing in 1 plane Measuring and compensation of unbalance in 1 plane (static) Fixed components Enables balancing at predefined positions, e. g. with balancing screws Automatic indexing Turn the spindle on the selected angle position and simplifies exact positioning of spindle Rack for accessories Storage rack with two integrated drawers for balancing adapters and further accessories Balancing software TDC 4.0New software with user-friendly graphical interface and touchscreen-control Deutsch/English/Francais/Italiano/Espanol Languages for user interface for internal display Set of balancing screws Set consisting of 11 x 10 special screws for fine balancing of tool holders with balancing threads M6
    ...more
  • Tool Dynamic TD Economic Modular Balancing System

    Tool Dynamic TD Economic Modular Balancing System

    Request for Price

    1 Unit piece (MOQ)

    Balancing machine to balance tool holders on 1 plane The Tool Dynamic TD Economic is your start into the modular balancing system of the Tool Dynamic series. The TD Economic measures and compensates the unbalance in one plane (static). Therefore it is perfect for balancing short tool holders and tools because of the couple unbalance being very low. The device is operated via the integrated keyboard and screen. Technical data subject to change without prior notice.HAIMER balancing adapter with automatic clamping m precise clamping for highest measuring accuracy and repeatability Easy and quickest changing due to compact design. A re-calibration of the machine is not necessary Equipment Base made of polymer concrete Highest measuring accuracy due to heavy base User interface Integrated user interface for easy handling of the machine Optical indexing help Indication of the exact spindle angle position on display Laser marking Indicates the position of unbalance and correction with a laser Print label Print balancing result on label Drilling radial Balancing by drilling radially Software for compensation with balancing rings Balancing by rings or other movable weights Index balancing Compensation of measuring errors by index balancing (2 measuring runs, indexing angle 180 Degree) Balancing with spindle compensation Quick and precise measuring of repetition parts (single measuring run) Balancing in 1 plane Measuring and compensation of unbalance in 1 plane (static) Fixed components Enables balancing at predefined positions, e. g. with balancing screws Automatic indexing Turn the spindle on the selected angle position and simplifies exact positioning of spindle Rack for accessories Storage rack with two integrated drawers for balancing adapters and further accessories Balancing software TDC 4.0New software with user-friendly graphical interface and touchscreen-control Deutsch/English/Francais/Italiano/Espanol Languages for user interface for internal display Set of balancing screws Set consisting of 11 x 10 special screws for fine balancing of tool holders with balancing threads M6

    Availability : 450 Kg

    Brand Name : Haimer

    ...more
    Get Best Price
  • Thread Forming Tap

    Thread Forming Tap

    5,000 /

    • MOQ10 Number Piece(s)
    • MaterialSteel
    • ShapeRound
    • Material GradeM2 to M16
    • Type of TapForming
    • SizeAs Per Requirement
    ...more
  • Thread Forming Tap

    Thread Forming Tap

    5,000 /

    10 Number Piece(s) (MOQ)

    Material : Steel

    Get Best Price
  • Step Drills

    Step Drills

    700 / Pack

    • FeatureEasy To Operate
    • Total Carbohydrate1year
    • ApplicationDrilling Machine
    • MaterialStainless Steel
    • Length (mm)100-150 mm
    • SC Step Drill produces good quality holes in a wide variety of materials, using either a bench drill or light pedestal drilling machine. Each tool cuts concentric holes in a range of specific sizes. For material up to 1/8" (3mm) thick.
    ...more
  • Step Drills

    Step Drills

    700 / Pack

    SC Step Drill produces good quality holes in a wide variety of materials, using either a bench drill or light pedestal drilling machine. Each tool cuts concentric holes in a range of specific sizes. For material up to 1/8" (3mm) thick.

    Feature : Easy To Operate

    Total Carbohydrate : 1year

    Application : Drilling Machine

    Material : Stainless Steel

    ...more
    Get Best Price
  • Solid Carbide End Mill

    Solid Carbide End Mill

    7,097 /

    • MOQ10 Units
    • Surface TreatmentPolished
    • Shank Diameter1 mm to 20 mm
    • Fine Balancedless than 1 gmm
    • Runoutless than 5 mu mm
    • BrandHaimer
    • Shank Toleranceh5
    • Length50-250 mm
    • Ramping45 Degree
    • Length Of Cut2, 3, 4, 5
    • Diameter1-20 mm
    ...more
  • Solid Carbide End Mill

    Solid Carbide End Mill

    7,097 /

    10 Units (MOQ)

    Surface Treatment : Polished

    Shank Diameter : 1 mm to 20 mm

    Get Best Price
  • Side Lock Adaptor

    Side Lock Adaptor

    3,500 /

    • MOQ1 Piece(s)
    • Number Of FlowerSide Lock Holders
    • HardnessHRC55-60
    • MaterialAlloyed Steel
    • ApplicationMilling Cutter
    ...more
  • Side Lock Adaptor

    Side Lock Adaptor

    3,500 /

    1 Piece(s) (MOQ)

    Number Of Flower : Side Lock Holders

    Hardness : HRC55-60

    Material : Alloyed Steel

    ...more
    Get Best Price
  • Carbide Rotary Burr

    Carbide Rotary Burr

    300 /

    • MOQ100 Piece Piece(s)
    • Surface FinishingPolished
    • Number Of FlowerCarbide Rotary Burr
    • MaterialCarbide
    • Head ShapeRotary
    • UsageMetal Drilling, Wood Drilling, Well Drilling, Masonry Drilling, Woodworking
    • BrandDormer
    • Packaging TypeBox
    • Diameter3.00 - 16.00 mm
    • Weight0.1 Kg
    ...more
  • Carbide Rotary Burr

    Carbide Rotary Burr

    300 /

    100 Piece Piece(s) (MOQ)

    Surface Finishing : Polished

    Number Of Flower : Carbide Rotary Burr

    Material : Carbide

    ...more
    Get Best Price
  • Pcd Inserts

    Pcd Inserts

    1,500 / Piece

    • MOQ100 Piece Piece(s)
    • MaterialPolycrystaline Diamond
    • ApplicationIndustrial
    • ConditionNew
    • Surface FinishMirror Finish
    • Multi Layer CoatingLong Life
    • Indexable Insert With Coating Bk7615:- Increase in process reliability Reducing the processing time by increasing the average Increase in contact time of up to 100% possible
    ...more
  • Pcd Inserts

    Pcd Inserts

    1,500 / Piece

    100 Piece Piece(s) (MOQ)

    Indexable Insert With Coating Bk7615:- Increase in process reliability Reducing the processing time by increasing the average Increase in contact time of up to 100% possible

    Material : Polycrystaline Diamond

    Application : Industrial

    Condition : New

    ...more
    Get Best Price
  • Milling Inserts

    Milling Inserts

    1,000 /

    • ApplicationIndustrial,Metal Working Tool
    • Brand NamePramet
    • MaterialTungsten Carbide
    • Design TypeMilling Insert
  • Milling Inserts

    Milling Inserts

    1,000 /

    Application : Industrial,Metal Working Tool

    Brand Name : Pramet

    Material : Tungsten Carbide

    ...more
    Get Best Price
  • Machine Tap

    Machine Tap

    Get Latest Price

    • MaterialHSS-E
    • DiameterM8
    • Brand NameVergnano
    • Usage/ApplicationIndustrial Use
    • Tap StyleMachine Tap For Straight
    • Number Of FluteStraight Flute
    ...more
  • Machine Tap

    Machine Tap

    Request for Price

    Material : HSS-E

    Diameter : M8

    Get Best Price
  • Lubricating Oil

    Lubricating Oil

    210 / Litre

    • Number Of FlowerEngine Oil
    • ApplicationMarine And Industrial
    • FeatureBase Oil, Additive
    • Packaging TypeBarrel
    • Type of Gear OilAdhesive, Compressor Oil
    • Recommended by ExxonMobil for use in Heavy-duty manual transmissions, axles, and final drives requiring API GL-5 and MT-1 level performance On-highway light and heavy-duty trucks, busses, vans, and cars Off-highway industries including construction, mining, quarrying, and agriculture Other heavy-duty industrial and automotive applications involving hypoid and other gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque conditions prevail   Advantages Extended gear and bearing life due to minimal deposits and longer seal life Increased load carrying capability and reduced operating costs Reduced wear and longer component life Reduced number of gear lubricants to simplify inventory and minimize misapplication   Additional Information:   Delivery Time: immediate Packaging Details: 20 liter to 210 liter
    ...more
  • Lubricating Oil

    Lubricating Oil

    210 / Litre

    Recommended by ExxonMobil for use in Heavy-duty manual transmissions, axles, and final drives requiring API GL-5 and MT-1 level performance On-highway light and heavy-duty trucks, busses, vans, and cars Off-highway industries including construction, mining, quarrying, and agriculture Other heavy-duty industrial and automotive applications involving hypoid and other gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque conditions prevail   Advantages Extended gear and bearing life due to minimal deposits and longer seal life Increased load carrying capability and reduced operating costs Reduced wear and longer component life Reduced number of gear lubricants to simplify inventory and minimize misapplication   Additional Information:   Delivery Time: immediate Packaging Details: 20 liter to 210 liter

    Number Of Flower : Engine Oil

    Application : Marine And Industrial

    Feature : Base Oil, Additive

    Packaging Type : Barrel

    ...more
    Get Best Price
  • Lubricant Grease

    Lubricant Grease

    210 / Litre

    • UsageInduatrial Use
    • Pack Sizes (LT/KG)210 ltr
  • Lubricant Grease

    Lubricant Grease

    210 / Litre

    Get Best Price
  • HSS Taper Shank Drills

    HSS Taper Shank Drills

    700 / Units

    • MOQ10 Units
    • MaterialSteel
    • Length1-30 mm
    • GradeHigh Speed Steel 8-10 Mm HSS
    • UsageDrilling Machine
    • BrandDormer
    • Packaging TypeBox
    • Length (mm)60-100 mm
    ...more
  • HSS Taper Shank Drills

    HSS Taper Shank Drills

    700 / Units

    10 Units (MOQ)

    Material : Steel

    Length : 1-30 mm

    Get Best Price
  • HSS Reamer

    HSS Reamer

    2,000 / Number

    • MOQ10 Number
    • Length100 to 250 mm
    • Diameter20 to 71 mm
    • MaterialCarbon Steel
    • Surface Finishing7 degree helix
    ...more
  • HSS Reamer

    HSS Reamer

    2,000 / Number

    10 Number (MOQ)

    Length : 100 to 250 mm

    Get Best Price
  • HNGX 09 Inserts

    HNGX 09 Inserts

    Get Latest Price

    HNGX 06 and HNGX 09 Inserts:- 45° face milling cutter with indexable inserts HNGX 06 and HNGX 09. Features: â€Â¢ Designed to generate improved surface finish â€Â¢ Inserts with 12 cutting edges â€Â¢ Differential tooth pitch â€Â¢ Internal coolant supply â€Â¢ Neutral design for left and right rotation â€Â¢ Unique insert geometry F, M, R for each particular operation (from finishing to roughing â€Â¢ Wiper inserts also available Advantages: â€Â¢ High quality surface finish â€Â¢ Low cutting forces â€Â¢ Wide area of application â€Â¢ High tool accuracy â€Â¢ Quiet running r no Tool Code Description Rate/Approx HNGX INSERT 1 HNGX 0604ANSN-F:8230 HNGX 0604ANSN-F:8230 960 2 HNGX 0604ANSN-F:8215 HNGX 0604ANSN-F:8215 960 3 HNGX 0906ANEN-FF:8230 HNGX 0906ANEN-FF:8230 1250 4 HNGX 0906ANSN-M:M5315 HNGX 0906ANSN-M:M5315 1350 5 HNGX 0906ANSN-R:8230 HNGX 0906ANSN-R:8230 1300 6 HNGX 0604ANSN-M:8230 HNGX 0604ANSN-M:8230 960
    ...more
  • HNGX 09 Inserts

    HNGX 09 Inserts

    Request for Price

    100 Piece(s) (MOQ)

    HNGX 06 and HNGX 09 Inserts:- 45° face milling cutter with indexable inserts HNGX 06 and HNGX 09. Features: â€Â¢ Designed to generate improved surface finish â€Â¢ Inserts with 12 cutting edges â€Â¢ Differential tooth pitch â€Â¢ Internal coolant supply â€Â¢ Neutral design for left and right rotation â€Â¢ Unique insert geometry F, M, R for each particular operation (from finishing to roughing â€Â¢ Wiper inserts also available Advantages: â€Â¢ High quality surface finish â€Â¢ Low cutting forces â€Â¢ Wide area of application â€Â¢ High tool accuracy â€Â¢ Quiet running r no Tool Code Description Rate/Approx HNGX INSERT 1 HNGX 0604ANSN-F:8230 HNGX 0604ANSN-F:8230 960 2 HNGX 0604ANSN-F:8215 HNGX 0604ANSN-F:8215 960 3 HNGX 0906ANEN-FF:8230 HNGX 0906ANEN-FF:8230 1250 4 HNGX 0906ANSN-M:M5315 HNGX 0906ANSN-M:M5315 1350 5 HNGX 0906ANSN-R:8230 HNGX 0906ANSN-R:8230 1300 6 HNGX 0604ANSN-M:8230 HNGX 0604ANSN-M:8230 960

    ...more
    Get Best Price
  • Grooving Tool Holder

    Grooving Tool Holder

    1,000 / Piece

    • MOQ1 Number Piece(s)
    • ApplicationCNC Lathe Machining
    • HardnessHRC45-50
    • Brand NameAll
    • MaterialSteel
    • Packaging TypeCustomized
    • Tool Length150 mm
    • The GFI tools for the LCMF indexable inserts represent a modern solution for shallow grooving into depth corresponding to triple of the width of the indexable cutting insert. The assortment has newly been completed with GFM holders for the LCMR inserts corresponding to quintuple of the width of the indexable cutting insert and GFK tools and GFK holders for the LCMF cutting inserts of 2 mm width enabling parting off and grooving up to 16 mm depth. The tools for the LCMF inserts combine a possibility of grooving and copy (multidirectional) turning.
    ...more
  • Grooving Tool Holder

    Grooving Tool Holder

    1,000 / Piece

    1 Number Piece(s) (MOQ)

    The GFI tools for the LCMF indexable inserts represent a modern solution for shallow grooving into depth corresponding to triple of the width of the indexable cutting insert. The assortment has newly been completed with GFM holders for the LCMR inserts corresponding to quintuple of the width of the indexable cutting insert and GFK tools and GFK holders for the LCMF cutting inserts of 2 mm width enabling parting off and grooving up to 16 mm depth. The tools for the LCMF inserts combine a possibility of grooving and copy (multidirectional) turning.

    Application : CNC Lathe Machining

    Hardness : HRC45-50

    Brand Name : All

    Material : Steel

    Packaging Type : Customized

    ...more
    Get Best Price
  • Forming Taps

    Forming Taps

    Get Latest Price

    • MaterialHigh Speed Steel
    • Material GradeM2 to M16
    • Type of TapForming
    • ShapeRound
    • Minimum Order Quantity10 Number
    ...more
  • Forming Taps

    Forming Taps

    Request for Price

    Material : High Speed Steel

    Get Best Price
  • Face Milling Cutter

    Face Milling Cutter

    25,000 / Piece

    • MOQ1 Number Piece(s)
    • MaterialTungsten Steel
    • ApplicationFace Milling Cutter
    • Radial Tolerance0.03 mm
    • HardnessHRC40-45
    • Accuracy0.1mm
    • Used forFace Milling
    • The assortment of face milling cutters consists of the tools for plain milling (r 45 Degree to 75 Degree). You can find here versions for productive and general milling. The assortment is completed with the offer of milling cutter for heavy rough milling (r 57 Degree and 60 Degree). There are face milling cutters available from 20 mm to 315 mm in the offer according to the type and size of the indexable cutting insert. Shoulder and copy milling cutters (especially high-feed milling cutters) can also be used in this field.
    ...more
  • Face Milling Cutter

    Face Milling Cutter

    25,000 / Piece

    1 Number Piece(s) (MOQ)

    The assortment of face milling cutters consists of the tools for plain milling (r 45 Degree to 75 Degree). You can find here versions for productive and general milling. The assortment is completed with the offer of milling cutter for heavy rough milling (r 57 Degree and 60 Degree). There are face milling cutters available from 20 mm to 315 mm in the offer according to the type and size of the indexable cutting insert. Shoulder and copy milling cutters (especially high-feed milling cutters) can also be used in this field.

    Material : Tungsten Steel

    Application : Face Milling Cutter

    ...more
    Get Best Price
  • End Mill Holder

    End Mill Holder

    14,000 / Piece

    • MaterialStainless Steel
    • ShapeRound
    • CoatingSS
    • Brand NamePramet
    • AngleShank Type Cylindrical.
    • Packaging TypeBox Courier
    • WeightWeight 25 kg
    ...more
  • End Mill Holder

    End Mill Holder

    14,000 / Piece

    Material : Stainless Steel

    Shape : Round

    Coating : SS

    Brand Name : Pramet

    ...more
    Get Best Price
  • Drilling Equipment

    Drilling Equipment

    Get Latest Price

    • Brand NameDormer
    • TypeStraight Shank
    • MaterialStainless Steel
    • Length100-150 mm
    • Diameter10 mm
    • Minimum Order Quantity10 Piece
    ...more
  • Drilling Equipment

    Drilling Equipment

    Request for Price

    Brand Name : Dormer

    Get Best Price
  • Drill Chuck Holders

    Drill Chuck Holders

    5,000 /

    • MOQ01 Piece(s)
    • MaterialStainless Steel
    • BrandPramet
    • AccuracyLess Than Equal 0.03 mm
    • Usage/ApplicationIndustrial Use
    • Packaging TypeBox
    • Material GradeAccuracy Less Than Equal 0.03 mm
    • Diameter1-20 mm
    ...more
  • Drill Chuck Holders

    Drill Chuck Holders

    5,000 /

    01 Piece(s) (MOQ)

    Material : Stainless Steel

    Get Best Price
  • Drill Bit Set

    Drill Bit Set

    3,000 / Piece

    • MOQ1 Set Piece(s)
    • MaterialHigh Speed Steel
    • Number Of FlowerRotary Drill
    • Max Hole Size>15 mm
    • Max Drill Depth>50 mm
    • No Load Speed0-500
    • HSCO A777 heavy duty straight shank Jobber drills for machining higher tensile and tougher materials up to x4 diameter Ideal for use in CNC & automated machines where greater heat is generated during drilling 135 Degree split point geometry aids ease of penetration, precise positioning and improves hole size, finish and quality Bronze finish for easy tool identification Manufactured to DIN338 standards.
    ...more
  • Drill Bit Set

    Drill Bit Set

    3,000 / Piece

    1 Set Piece(s) (MOQ)

    HSCO A777 heavy duty straight shank Jobber drills for machining higher tensile and tougher materials up to x4 diameter Ideal for use in CNC & automated machines where greater heat is generated during drilling 135 Degree split point geometry aids ease of penetration, precise positioning and improves hole size, finish and quality Bronze finish for easy tool identification Manufactured to DIN338 standards.

    Material : High Speed Steel

    Number Of Flower : Rotary Drill

    ...more
    Get Best Price
  • Cylindrical Milling Cutters

    Cylindrical Milling Cutters

    55,000 / Number

    • MOQ1 Number
    • MaterialSteel
    • ShapeCylindrical
    • BrandPramet
  • Cylindrical Milling Cutters

    Cylindrical Milling Cutters

    55,000 / Number

    1 Number (MOQ)

    Material : Steel

    Shape : Cylindrical

    Get Best Price

Average Customer Rating


Good Good
2 ratings and 2 reviews

Business Rating


5 0
4 2
3 0
2 0
1 0
Write a Review

Choose the service or product you're reviewing for this business

How would you rate the business?

What did you like and dislike?

  • Response
  • Delivery
  • Quality

Tell us about your experience?

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers
  • Year of Establishment 2010
  • Ownership Type Others
  • GSTIN Number 27AYDPR2668G1Z4

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
we deals in
Cutting Recessing Tools,
HNGX 06 and HNGX 09 Inserts,
BT 40 Tool Holder,
Milling Inserts,
Grooving Tool Holder,
Step Drills,
U Drill Bit,
Carbide Insert,
PCD Inserts,
Side Lock Adaptor.
Read More »

Contact Information

Endeavour Technologies

  • Ms. Varsha Bhor
  • Shop No. 56, Wing B, Upper Ground Floor,Jai Ganesh Vision, Survey No. 171 Akurdi, Pune- 411035, Maharashtra
top