We are offering Epoxy Red Oxide Primer. Scope: a two pack epoxy high build coating with superb performance in severe marine & industrial environment. The product has excellent resistance to chemicals, solvents, fumes, splash & spillage. use: can be used in various industries including refineries, fertilizers & other chemical plants. Product data: type two pack, cured with polyamide composition catalyzed epoxy resin with red oxide viscosity (ford cup b4) 90±10 seconds specific gravity 1.30±0.05 mixing ratio base: catalyst(4:1) by volume pot life 3-4 hours application brushroller conventional airless spray recommended dft 35±5µ per coat theoretical spreading rate 5-6sq.mtr. Liter drying time 1. surface dry-35-40 min 2. tack free- 4 hours 3. hard dry-over night curing time 6-7 days over coating interval min: overnight max: 2 days flash point above 40 c colour red oxide packing 20 liters thinner pragati make epoxy thinner finish smooth & matt after complete curing of primer following tests should be carried. No. examine test specification result 1. adhesion test after 24 hrs. ( no lifting of film form) pass 2. scratch hardness test 1500-2000 gm. pass 3. flexibility to pass ¼ inch mandrel pass 4. salt spray 200-250 hrs. pass 5. humidity test 140 hrs. No blistering rusting & no loss of adhesion pass 6. resistance to grease for 48 hrs at r.t.no blistering. no deterioration of hardness, no failure of adhesion pass resistance guide: 1. chemical resistance exposures splash & spillage mild fumesout door resistance acid good very good alkalis good good solvents very good good salt excellent excellent water excellent excellent
Post Free Ad
www