Jo Flux Sinhagad Road, Pune, Maharashtra

We understand that superior-grade raw materials are essential for the production of quality products. Thus, we maintain cordial association with reliable vendors of the market. With our strong distribution network, we efficiently distribute goods to the desired place.

You can opt to make payment by LOC, COD, Cash Bank transfer, etc. according to the suitability of patrons. We are familiar with all and we make sure the transactions are secure. We are a reliable name when it comes to high quality silver brazing fluxes at competitively low prices.

We offer oxi 650 powder is a special purpose flux used in brazing carbide tip tools and high speed tools, available as per customer’s specifications. The oxi 650 powder is available in the form of smooth and creamy paste or in the form of fine powder without any coarse crystals. This flux is a widely active range used with stainless steel, tungsten carbides, chromium carbides & refectory metals. The flux is dark brown in color, containing elemental boron metal power and it is a perfect wetting with control spread. The flux is used when brazing with bag group (50%,49%,27%,25%) silver alloys with nickel & manganese, for torch and induction heat brazing.      oxiclean 650 powder        general properties a medium temperature dark brown flux used when brazing carbide tip tools, high speed tools. high tenacity. controlled spread. not easily exhausted during extended heat cycles.(long continuous activity range) contains elemental boron metal powder. international standard : en 1045 fh 12 activity range : 500°c - 900°c for used when brazing silver bag group alloys with nickel & manganese. For torch & induction heat brazing. activity : excellent life : long flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended fluidity : good capillary: medium standard packaging (kg) : 0.25, 0.5,5.0, 10.0, flux residues : corrosive

We are offering oxi 600 paste is a specially formulated flux used along with stainless steel, tungsten carbides, chromium carbides & refectory metals. The oxi 600 paste is available in a wide range and it is a perfect wetting action with spreading control. The paste comprises of elemental boron metal powder which is dark brown in color used for brazing with bag group (50%, 49%, 27%, 25%) silver alloys with nickel & manganese, also for torch and induction heat brazing.       oxiclean 600 paste          general properties a special purpose flux used with stainless steel, tungsten carbides, chromium carbides & refectory metals wide active range & perfect wetting with control spread. color dark brown. contains elemental boron metal powder. international standard : aws fb3-c activity range : 565°c - 925°c for use when brazing with bag group (50%,49%,27%,25%) silver alloys with nickel & manganese. For torch & induction heat brazing. activity : excellent life :excellent flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended fluidity : medium capillary: low standard packaging (kg) : 0.25, 0.5, 5.0, 10.0, flux residues : corrosive

We offer a wide range of lomelt powder, specially formulated balancing chemical ingredients and antioxidants with the help of chemical reactions. The lomelt powder is used for general purpose low melting flux with brazing bronzes, brasses, stainless & carbon steels promoting excellent capillary and fluidity, thus making stronger joints. To make a paste it can be mixed with water. It also makes excellent hot rodding application.       lomelt powder         general properties a general purpose low melting flux for use when brazing copper, bronzes, brasses, stainless & carbon steels its promotes excellent capillary & fluidity for tight fit joints. excellent in hot rodding application. can be mixed with water to make a paste. international standard : en 1045 fh 10 activity range : 450°c - 800°c for use when brazing with high silver bag group (42%-50%) & bcup group brazing alloys. For torch brazing application. activity : medium life : short flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended fluidity : excellent capillary: excellent standard packaging (kg) : 0.25, 0.5, 4.0, 10.0, flux residues : corrosive

We are offering lomelt 65 paste is a flux which is specially formulated for high volume production, to be used when brazing copper, bronzes, brasses, stainless & carbon steels, nickel. This flux is for silver content brazing alloys ranging from medium to low. Lomelt 65 paste resistant to heat and promotes optimum alloy bonding. The paste is used for brazing with bag (20% - 30%) silver group having liquids between 700oc to 825oc, for torch and induction brazing as well.           lomelt 65 paste         general properties a special purpose flux used when brazing copper, bronzes, brasses, stainless & carbon steels, nickel. flux for medium to low silver content brazing alloys. a special composition flux for high volume production. promotes optimal alloy bonding. high heat resistance. international standard : en 1045 fh 10 activity range : 570°c - 850°c for use when brazing with bag (20% - 30%) silver group having liquids between 700°c to 825°c. For torch & induction brazing. activity : good life : good flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended fluidity : good capillary: excellent standard packaging (kg) : 0.25, 0.5, 5.0, 10.0, flux residues : corrosive

We are offering lomelt 60 paste is specially formulated flux used when brazing stainless & carbon steels, carbides, heat resistant alloys. The lomelt 60 paste produced by us is an in dissolving oxide which is highly active. The paste makes an excellent wetting action that promotes optimum alloy bonding, suitable for tight and loose fit joints, for surface building and gap fillings. The lomelt 60 paste produced by us is used when brazing with high silver bag group (30%-45%) & bcup group brazing alloys, also for torch and induction brazing.          lomelt 60 paste        general properties a special purpose flux used when brazing stainless & carbon steels, carbides, heat resistant alloys. highly active in dissolving refectory oxide. excellent wetting action. promotes optimal alloy bonding. suitable for tight fit joints as well as loose fit joints for surface building and gap fillings. international standard : en 1045 fh 10 activity range : 500°c - 800°c for use when brazing with high silver bag group (30%-45%) & bcup group brazing alloys. For torch & induction brazing. activity : excellent life : good flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended fluidity : good capillary: good standard packaging (kg) : 0.25, 0.5, 5.0, 10.0, flux residues : corrosive

we are offering lomelt 58 paste is a smooth creamy flux used when brazing copper, bronzes, brasses, stainless & carbon steels, carbides, hard metals, nickel & nickel alloys. lomelt 58 paste is a highly concentrated flux which is active at 600ºc above and up to 870°c effective with liquids. without spattering and heating, lomelt 58 paste is a perfect wetting action for heating. the paste can be used for brazing with silver bag group cadmium bearing, cadmium free & bcup group brazing alloys, for torch, induction, furnace brazing application.        lomelt 58 paste        general properties a new generation smooth creamy flux used when brazing copper, bronzes, brasses, stainless & carbon steels, carbides, hard metals, nickel & nickel alloys. a highly concentrated flux is fully active at 600°c above and effective with liquids up to 870°c. perfect wetting action on even heating without spattering or running. international standard : aws fb3-a activity range : 500°c - 870°c for use when brazing with silver bag group cadmium bearing, cadmium free & bcup group brazing alloys. for torch, induction, furnace brazing application. activity : good life : good flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended fluidity : excellent capillary: excellent standard packaging (kg) : 0.25, 0.5, 5.0, 10.0, flux residues : corrosive

We are offering lomelt 57 paste is a general purpose flux used for universal brazing such as copper, bronzes, brasses, stainless & carbon steels, carbide, nickel and nickel alloys. The paste is used to braze the dissimilar metals easily. The lomelt 57 paste is highly suitable for tight and loose fit joints, surface building and gap fillings as well. It is to be used for brazing with silver bag group (30%-45%) & bcup group brazing alloys, for torch, induction, furnace heating brazing.            lomelt 57 paste        general properties a all purpose flux for universal uses brazing copper, bronzes, brasses, stainless & carbon steels, carbide, nickel & nickel alloys. dissimilar metals in the above group can be easily brazed. suitable for tight fit joints as well as loose fit joints for surface building and gap fillings. international standard : en 1045 fh 10 activity range : 550°c - 800°c for use when brazing with silver bag group (30%-45%) & bcup group brazing alloys. For torch, induction, furnace heating brazing. activity : good life : good flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended fluidity : good capillary: good standard packaging (kg) : 0.25, 0.5, 5.0, 10.0, flux residues : corrosive

We are offering lomelt 55 powder is a general purpose flux of slight high temperature which is used while brazing copper, bronzes, brasses, stainless & carbon steels, nickel & nickel alloys. This lomelt 55 powder has excellent wetting and heat resisting properties. The lomelt 55 powder is suitable for the production with induction heat brazing and is required to be applied in dry flux. This powder can make a cream paste if mixed water. This is also suitable to use when brazing with bag group with cadmium & cadmium free silver brazing alloys and can be used with torch & induction heating brazing. lomelt powder general properties a general purpose low melting flux for use when brazing copper, bronzes, brasses, stainless & carbon steels its promotes excellent capillary & fluidity for tight fit joints. excellent in hot rodding application. can be mixed with water to make a paste. international standard : en 1045 fh 10 activity range : 450°c - 800°c for use when brazing with high silver bag group (42%-50%) & bcup group brazing alloys. For torch brazing application. activity : medium life : short flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended fluidity : excellent capillary: excellent standard packaging (kg) : 0.25, 0.5, 4.0, 10.0, flux residues : corrosive

Hitemp 750 Powder offered by us is a powder type pink flux for braze welding or brazing of copper alloys, carbon and galvanized steel, carbides. The Hitemp 750 Powder is used to remove the residue easily. The powder produces excellent visibility while brazing and is extensively used in areas like automobile industries, cycle manufacturing, furniture industries, tool manufacturing industries and home appliances. This powder is used when brazing with low fuming bronze, nickel bronze, brass brazing alloy, also for torch, induction and furnace heat brazing.       Hitemp 750 Powder      General Properties A powder type pink flux for braze welding /brazing of copper alloys, carbon & galvanized steel, carbides. Easy residue removal. High fluxing activity with good wetting and spread. Excellent visibility while brazing. (no sodium glare) Application area : automobile industries, cycle manufacturing, furniture industries, tool manufacturing industries & home appliances. International standard : AWS FB3-J Activity range : 750°c - 1150°c For use when brazing with low fuming bronze, nickel bronze, brass brazing alloy. For torch, induction & furnace heat brazing. Activity : good Life : very high Flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended Fluidity : good Capillary: medium Standard packaging (kg) : 0.25, 0.5, 5.0, 10.0 Flux residues : non corrosive

With substantial warehouse that is sprawling over large area, we have the capability to partner with management in performing the detail processes that require handling of the tasks such as sourcing, inspection, internal replenishment to picking positions, packing and shipping. Our facility in pune(india) is well connected by a variety of modes of transportation. Thus, we are able to reach customer anywhere.

Alweld Powder is a flux manufactured for brazing or welding all types’ aluminum & its alloys. This powder has High fluxing activity with good fluidity that reduces pores and and give perfect fittings to joints. This flux is widely used starting from fabrication to repairing of components and it also has a long activity range for brazing with 5% Si Al alloy & pure aluminum for fusion welding. It is also used for torch heat brazing.             Alweld Powder       General Properties Alweld is flux powder for brazing/welding all types’ aluminum & its alloys. High fluxing activity with good fluidity. Eliminates porosity and strengthens joints. It covers a wide field of application from fabrication to repairs of components. Long activity range. Proprietary flux formulation Activity range : 550°c - 700°c For use when brazing with 5% Si Al alloy & pure aluminum for fusion welding. For torch heat brazing. Activity : excellent Life : good Flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended Fluidity : good Capillary: sufficient Standard packaging (kg) : 0.25, 0.5, 5.0, 10.0 Flux residues : corrosive

We offer Albraze Powder which is a low temperature flux used for brazing aluminum and low alloyed aluminum alloys. This flux has High fluxing activity with good capillary flow which is widely used in air conditioning, radiators, aluminum tubes and utensils, window frame, aluminum furniture, etc. The Albraze Powder is used for brazing with 12% Al Si brazing alloy, for brazing with torch, induction and for furnace brazing as well.        Albraze Powder       General Properties Albraze is a flux powder for brazing aluminum and low alloyed aluminum alloys. Low temperature activity. High fluxing activity with good capillary flow. Application area: air conditioning, radiators, aluminum tubes & utensils, window frame, aluminum furniture. International standard : AWS : FB1-C Activity range : 500°c - 650°c For use when brazing with 12% Al Si brazing alloy. For brazing with torch, induction, & furnace brazing. Activity : excellent Life : short Flux removal : hot diluted caustic soda dip or wire brush with hot water (60°c) is recommended Fluidity : good Capillary: excellent Standard packaging (kg) : 0.25, 0.5, 5.0, 10.0, Flux residues : corrosive