Rushiprabha Engineers Private Limited Warje, Pune, Maharashtra

Using IS-2016 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer’s requirement. Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation. Threading Sizes M6 to M100 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types As per IS-2016 Type A Punched Washers for Hex Bolts & Screws. As per IS 2016 Type B Punched Washers for Round & Cheese Head Screws. Any other Washers as per customer’s requirement.

using is-2062 grade a, en-8, en-19, ss-410, ss-304, ss-316 or any other material as per customer’s specification. as per is-1367 class 4.6, class 8.8, class 10.9, a2-70, a4-70, a4-80 surface treatment : blackodised, phosphated, zinc plated with yellow, blue, olive green passivation. threading sizes m6 to m24 iso, metric 6g, as per is-4218 or equivalent in bsw / unc of following types suitable for 15nb (1/2") up to 800 nb (12") pipes. suitable for 12.5 (1/2") up to 800 (12") od pipes. available in rod sizes 6mm to 16mm with 2 nuts & 2 washers. available in flat (patti) for above sizes. any other sizes as per customer’s drawing & requirement. .

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per the specification of the customer. As per IS-1367 Class 5.6, Class 8.8, Class 10.9, Class12.9, ASTM A193 B7, ASTM A193 B8, B8M, B16, ASTM A563 L7, L7M. Surface Treatment: Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation. Threading sizes from M6 to M100 ISO Metric 6g as per IS-4218 or equivalent in BSW / UNC, of following types Full Thread Studs as per DIN 975. Rods with Threading on one side as per DIN 524. Studs with Threading on two sides as per DIN 939, DIN 940, IS 1862 Type A, B & C. Tip-Welding Studs. Tie Rod Studs for Plate Type Heat Exchangers. Square / ACME Thread Studs (Lead Screws). Other Studs as per your specific requirement and drawing.

Using IS-2062, Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material specified by customer. As per IS-1367 Class 5.6, Class 8.8, Class 10.9, ASTM A 193 B7, B8, B8M, A2-70, A4-70, A4-80. Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation. Threading Sizes M6 to M100 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types Full / Half Thread Allen Bolts as per IS-2269. Other Allen Bolts as per customer’s requirement.

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per your specification. As per IS1367 Class 4.6, Class 5.6, Class 8.8, Class 10.9, A2-70, A4-70, A4-80. Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation. Threading Sizes M6 to M64 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types As per IS-2388 Type A (Flat End) Type B & C (Conical End) Type E (Cylindrical Dog Point) Type G (Taper Dog Point) Type J (Cup Point) Type K (Oval Point) Other GREPLb Screws as per your specific requirement and drawing.

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer’s requirement. As per IS-1367 Class 4, Class 8, Class 10, A2-70, A4-70, A4-80, SA194 Gr 2H/B8A Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation. Threading Sizes M6 to M100 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types Standard Nuts as per IS-1364, ISO 4032, IS 6623. Lock Nuts Nylock Nuts Heavy Nuts Long / Double Nuts Castle Nuts as per IS-2232 Round Nuts Any other nut as per customer’s drawing & requirement

Size : 0-15mm, 15-30mm

Material : Metal

Diameter : 0-10mm, 10-20mm

Thickness : 0-5mm, 5-10mm

Color : Silver

Surface Finishing : Polished

Using IS-2062 Grade A material or in SS-304, SS-316 or any other material as per customer’s specification.As per IS-1367 Class 4.6, Class 5.6, Class 8.8, Class 10.9, A2-70-, A4-70, A4-80.Surface Treatment : Zinc Plated with Yellow, Blue, Olive-Green passivation.Suitable for Angle Fitment (J Clamp) of GI Asbestos Cement CorREPLgated and non-corREPLgated sheets. With 1 sq. nut, 1 MS Washer & 1 Tar Washer.

Using IS-2062 Grade A material or in SS-304, SS-316 or any other material as per customer’s specification. As per IS-1367 Class 4.6, Class 5.6, Class 8.8, Class 10.9, A2-70-, A4-70, A4-80. Surface Treatment : Zinc Plated with Yellow, Blue, Olive-Green passivation. Threading sizes from M6 to M 24 ISO Metric 6 g as per IS 4218 or equivalent in BSW / UNC of following types. Suitable for Angle Fitment (J Clamp) of GI / Asbestos Cement CorREPLgated and non-corREPLgated sheets. With 1 sq. nut, 1 MS Washer & 1 Tar Washer. Suitable for pipe fitment (J Clamp) of GI / Asbestos Cement CorREPLgated and non-corREPLgated sheets. With 1 sq. nut, 1 MS Washer & 1 Tar Washer. Suitable for channel fitment (L Clamp) of GI / Asbestos Cement CorREPLgated and non-corREPLgated sheets. With 1 Sq. Nut, 1 MS Washer & 1 Tar Washer. Any other size as per customer’s requirement.

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer specification. As per IS-1367 Class 5.6, Class 8.8, Class 10.9, ASTM A 193 B7, B8, B8M, A2-70, A4-70, A4-80 Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation. Threading Sizes M6 to M100 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types Full Thread Hex Bolts. Half Thread Hex Bolts. Hex Bolts for Steel StREPLctures as per IS-6639. Special Hex Bolts as per DIN 561, DIN 933. Other Hex Bolts as per your specific requirement and drawing.

Using A572, GR. 50, IS-2062 Grade A, En-8, En-19 material as per IS-1367 Class 8.8 / Class 10.9 or as per the requirement of the customer. Size from M8 to M100 Manufactured as per IS-5624, DIN 267, and DIN 529 with 2 nuts & washers Type A, B, C, D. J Type / L Type Foundation Bolts with Class 8 nut, 1 washer and 1 lock nut. Plate Type Foundation Bolts with 1 nut & 1 washer. Chimney Foundation Bolts. Long length (up to 6000 mm) Rock Bolts in Torr-Steel with 1 nut & 1 washer. Rail Track Foundation Bolts with 1 nut, 1 washer, 1 spring washer. Other Foundation Bolts as per specific requirement & drawing.

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer’s specification. As per IS-1367 Class 4.6, Class 8.8, Class 10.9, A2-70, A4-70, A4-80 Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation. Threading Sizes M12 to M64 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types Manufacturing as per IS-4190 / DIN 580.

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer’s specification. As per Class 4.6, Class 5.6, Class 8.8, Class 10.9, A2-70, A4-70, A4-80. Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation Threading Sizes M6 to M64 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types Dimensions as per ISO-898/1.

This specification covers the B7, B8, B8M grade& High Strength Steel Bolts Classes 10.9 and 12.9 for StREPLctural Steel Joints. These are also called as High Friction Grip Bolts or StREPLctural Bolts. Sizes range from M12 to M36.

Using IS-2062 Grade A, material or in SS-304, SS-316 or any other material as per customer’s specification. Surface Treatment: Zinc Plated with Yellow, Blue, Olive-Green passivation.Threading sizes from M6 to M30 with Nuts & Washers.

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per your specification. As per IS-1367 Class 4.6, Class 5.6, Class 8.8, Class 10.9, A2-70, A4-80. Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation. Threading Sizes M6 to M24 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types Cup Point with Knurling as per IS – 6094. Dog Point as per IS-6094 Pointed as per IS-2064. Other GREPLb Screws as per customer’s specifications.