San Telequip (P) Ltd. Navi Peth, Pune, Maharashtra

Replaces any existing RS232 cable. Full Bluetooth 2.0+ EDR support. No external software needed. Easy to install.Distance from 150 to 300 feet with CLASS 2 and CLASS 1 Enhanced Antenna.Plug-and Play type.

SC09VF series can simultaneously transmit 8-bit digitally encoded broadcast quality Video or bidirectional Data/Audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. Used for cameras having P/T/Z capabilities. Plug and Play design ensures ease of installation.

SC11U allows you to connect serial (RS232RS485) devices to a USB. It can autodetect baudrate and data direction. It provides 3KV isolation and surge protection on each data line and does not require external power. Supports 115.2 kbps baud rate.

SP485 is designed to protect Serial port from damage which may result from transient events such as lightning, ESD to an open connector or hot cables connected to I/O ports. The protection includes current limitation, voltage clamping, surge arresting using a mix of various protection devices.

SC11U allows you to connect serial (RS232/RS485) devices to a USB. It can autodetect baudrate and data direction. It provides 3KV isolation and surge protection on each data line and does not require external power. Supports 115.2 kbps baud rate.

Low cost PCB module for OEMs to be integrated in to their products. Supports both RS232 / RS485 interface. Requires external 5 V DC supply.

SC07 is used to expand Line driving capability of RS485 / RS422 beyond 1.2 km. It also converts RS485 to RS422 ( and vica versa ). It can also be used as RS485 Isolator. They are used for providing Isolation to Serial Interface. With high degree of protection, it keeps the COM port of your equipment safe.

With a 4 Port RS485 Hub, connect with ease as many as 128 Energy meters or any other RS485 device on the 485 network, without bothering too much about installing repeaters, number of Multidrops, cabling hassles & without compromising the speed. Each port provides optical isolation, surge and ESD protection.

SC04M2 is used to convert RS232 devices to 2 Wire RS485 and vica versa. They are used for running RS232 signals to long distance (1.2km). This converter can also facilitate multiple field devices to be multidropped on the RS485 and allow their connectivity to a RS232 device.

SC04M2 is used to convert RS232 devices to 2 Wire RS485 and vica versa. They are used for running RS232 signals to long distance (1.2km). This converter can also facilitate multiple field devices to be multidropped on the RS485 and allow their connectivity to a RS232 device.

Extend the COM ports available with PC by connecting Device Server on Ethernet port of PC. Option to have Two serial ports – one RS232 and one RS485 and 10/100 Mbps Ethernet.

Model SC10MK is a programmable, Web enabled Modbus RTU to Modbus TCP protocol converter. High end CPU along with Linux OS makes it an idle choice for applications like Meter readings, Solar controls & any other protocol conversion applications. 

Model SC10MK is a programmable, Web enabled Modbus RTU to Modbus TCP protocol converter. High end CPU along with Linux OS makes it an idle choice for applications like Meter readings, Solar controls & any other protocol conversion applications.

The German company was established in 2007 and develops innovative solutions for BACnet Gatways, web applications and Linux embedded applications. Their BACnet Gateway integrates meters on M-Bus, Modbus and 1-Wire sensors to a BACnet Infrastucture Network. Meters such as electric, gas, heat or water meters can be converted to BACnet.

SC12FEI is a Industrial grade 10/100Base-TX to 100Base-FX unmanaged standalone media converter. It enables you to mix legacy twisted-pair to a fiber-optic backbone and optimize total cost of ownership allowing trouble free & robust process of Data conversion.

SC09FS series of converters are an ideal choice for connecting devices situated in environments where electromagnetic & radio frequency is a major concern. They economically extend the Serial port over a distance up to 2Km over Multi-mode fiber or up to 20Km over Single-mode fiber. The converter supports RS232, RS422, RS485 (2 or 4 wire).

SC09FS series of converters are an ideal choice for connecting devices situated in environments where electromagnetic & radio frequency is a major concern. They economically extend the Serial port over a distance up to 2Km over Multi-mode fiber or up to 20Km over Single-mode fiber. The converter supports RS232, RS422, RS485 (2 or 4 wire).

Low cost PCB module for OEMs to be integrated in to their products. Supports both RS232 RS485 interface. Requires external 5 V DC supply.

Connect ASPI compatible printer port of Universal station of TDC3000 system with any standard Laser Jet series printers or Epson graphics compatible dot matrix printers.

BMS Gateway is an external Building and Industrial Automation multi-protocol device server for OEMs wanting to provide protocol translation between Serial-Serial, Serial-Ethernet and Ethernet-Ethernet devices using LonWorks, BACnet, Metasys N2, Modbus and more.

AS201 has been designed to cater to communicaiton redundancy requirements. It is Protocol independent with all the 3 Ports configurable as RS232 / RS485 / RS422. In AS201 the switching is effected by the presence / absence of a Digital signal (DI) of 24 V DC. AS201 does not use any Power Supply.

SRS 201 has been designed to cater to communicaiton redundancy requirements. It is very flexible and all the 3 Ports are RS232 / RS485 / RS422 configurable.It can enable 2 SCADA Masters talk to a common RTU or a single SCADA master to talk to Redundant RTU’s on field.