Spaco Technologies India Private Limited Midc, Pune, Maharashtra

  • TPS Series

    TPS Series

    Request for Price

    ( To prevent after burn in exhaust silencer during deceleration ) Applications : 4 - stroke : 100 cc - 150 cc, Motor cycles, scooters, 3 - wheelers, Mopeds Side Draught with Venturi 18mm, 20mm Oval Centrally positioned round float Independent Idling circuit, Jet with bleed holes and Air Controller Cylindrical Throttle Valve with adjustable Jet Needle Idle adjustment Overflow and drain screw arrangement Rigid Flange Mounting Cable / Lever operated choke Single and Multiple ignition curves Options : Auto Choke provision Purge port provision  

    ...more
    Get Best Price
  • Throttle Body

    Throttle Body

    Request for Price

    TBI fuel injection is a type of fuel injection system where the fuel is injected into the throttle body. The throttle body fuel injection system, or TBI as referred, works using a single or pair of injectors. The throttle looks like a carburettor without the fuel bowl, the metering jets or the float.This type of fuel injection system consists of only two major castings - the fuel body and the throttle body. The fuel body supplies the fuel while the throttle body has a valve that controls the flow of air. On the throttle, there are ports that gather signals to relay to the manifold absolute pressure sensor and to the emission control system.

    ...more
    Get Best Price
  • SI Series Carburetor

    SI Series Carburetor

    Request for Price

    Applications : 2 - Stroke 100 cc - 200 cc Scooters Venturi 15mm, 17mm, 20mm, 24mm & 26mm - Round Bore Down Draught with Single Choke body Independent Starting Circuit facilitates quick start in cold conditions. Independent Idling Circuit with Mixture Controller. Separate provision for sedimentation in float chamber ensures supply of filtered clean fuel. Easy precise and direct mounting on engine. Cable Operated Choke. Options : Auto Choke Solenoid Valve for petrol entry  

    ...more
    Get Best Price
  • SI Series Carburetor

    SI Series Carburetor

    Request for Price

    Venturi 15mm, 17mm, 20mm, 24mm & 26mm - Round Bore Down Draught with Single Choke body Independent Starting Circuit facilitates quick start in cold conditions. Independent Idling Circuit with Mixture Controller. Separate provision for sedimentation in float chamber ensures supply of filtered clean fuel. Easy precise and direct mounting on engine. Cable Operated Choke. Options : Auto Choke Solenoid Valve for petrol entry

    ...more
    Get Best Price
  • SHA Series

    SHA Series

    Request for Price

    Applications : 2 - Stroke Mopeds / Stationary Engines : 22 cc- 60 cc Side Draught with Venturi 7mm to 13mm - Round Bore Independent pilot circuit with Mixture Controller for ease of Idle Emission Control. Improved features for idling and smooth pick up. Integral clamping arrangement. Seperate provision for Filtered clean fuel. Options : Variety of Choke activations Air Intake Covers with Filters Throttle Operation : Cable / Lever Mechanism Drain screw arrangement Auto lube provision. Heating coil provision.  

    ...more
    Get Best Price
  • SHA Series Carburettors

    SHA Series Carburettors

    Request for Price

    Side Draught with Venturi 7mm to 13mm - Round Bore Independent pilot circuit with Mixture Controller for ease of Idle Emission Control. Improved features for idling and smooth pick up. Integral clamping arrangement. Seperate provision for Filtered clean fuel

    ...more
    Get Best Price
  • PHTA Series

    PHTA Series

    Request for Price

    Applications : 2 - Stroke / 4 - stroke : 150 cc - 500 cc, Motor cycles, 3 - wheelers Venturi 24mm to 30mm - Round Bore Side Draught with Single Choke body Centrally positioned dual lobe float Independent starting circuit facilitates quick start in cold conditions Independent idling circuit with jet and mixture controller Cylindrical throttle valve with adjustable Jet Needle Cable / Lever operated choke Options : Mounting arrangement : Clip Type with insulating bush & sealing ring Spigot type, suitable for Flexible Rubber mounting Flange Type Valve Controller from right side or left side Air / Mixture Control provision from right side or left side TICKLER Fuel delivery enhancer  

    ...more
    Get Best Price
  • MA Series

    MA Series

    Request for Price

    Applications: 2-Stroke : 150 cc - 175 cc Scooters, 3-wheelers Venturi 19mm - Round Bore Side Draught with Single Choke body Independent Starting circuit facilities quick start in cold conditions. Independent Idling circuit with Air controller Cylindrical Throttle Valve with adjustable Jet Needle Fuel level can be adjusted by Float Toggle Separate provision for sedimentation in Float Chamber ensures supply of filtered clean fuel Cable Operated Choke Options : TICKLER Fuel delivery enhancer Manually operated choke (flip type)  

    ...more
    Get Best Price
  • MA Series Carburettors

    MA Series Carburettors

    Request for Price

    Venturi 19mm - Round Bore Side Draught with Single Choke body Independent Starting circuit facilities quick start in cold conditions. Independent Idling circuit with Air controller Cylindrical Throttle Valve with adjustable Jet Needle Fuel level can be adjusted by Float Toggle Separate provision for sedimentation in Float Chamber ensures supply of filtered clean fuel Cable Operated Choke Options : TICKLER Fuel delivery enhancer Manually operated choke (flip type)

    ...more
    Get Best Price
  • Auto & Non Auto Components

    Auto & Non Auto Components

    Request for Price

    We entered in to manufacturing of Precision Pressure Die - cast & Turned Components for Automotive & Non - Automotive applications such as Alternator & Starter Motor Cover & Brackets, Canister & Bracket for Shock absorber, Master Cylinder Piston & Caliper Piston for Brake system, parts for computer hard wear.

    ...more
    Get Best Price
  • non auto components

    non auto components

    Request for Price

    We entered in to manufacturing of Precision Pressure Die - cast & Turned Components for Automotive & Non - Automotive applications such as Alternator & Starter Motor Cover & Brackets, Canister & Bracket for Shock absorber, Master Cylinder Piston & Caliper Piston for Brake system, parts for computer hard wear

    ...more
    Get Best Price
  • Stationary Engines SHA / SHA - J/K/L Series

    Stationary Engines SHA / SHA - J/K/L Series

    Request for Price

    Get Best Price
  • Motorcycle PHB Series

    Motorcycle PHB Series

    Request for Price

    Get Best Price
  • Chassis Dynamometers

    Chassis Dynamometers

    Request for Price

    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Four and a half decades ago (1971), SPACO began its endeavour to manufacture Carburettors indigenously for Two wheelers. SPACO would like to introduce itself as Pioneers of 2 & 3 Wheeler Carburettors in India and who have had technical tie-ups with renowned companies from Europe as well as Japan for a long time.
SPACO is in the business of manufacturing Carburettors ranging from Venturi 7mm to 30mm and Carburettor Spares for 2 & 3 wheelers, suitable for engines from 22 cc to 500 cc used on mopeds, scooters, three-wheelers and motorcycles. We also manufacture carburettors for Stationary Engines e.g., engines used for agricultural sprayers and other agro-applications. Besides the above, We also manufacture Throttle Bodies, Precision Pressure Die - cast & Turned Components for Automotive & Non - Automotive applications.
SPACO has two operational plants, one in Chinchwad, Pune and the other located at Madhwas in Gujarat. Both the Plants are Certified under ISO/TS 16949 : 2009 - TÜV(Rheinland), Germany. Our Pune Plant is also Certified under ISO 14001: 2004 - TÜV(Rheinland), Germany.
SPACO has in-house Product Development and Product testing facilities for Carburettors. Our products are synonymous with quality, reliability and efficiency as they are manufactured using latest high precision machinery to ensure consistency and thereby comply with strict emission norms. Many of our manufacturing processes employ high precision CNC machines. We have also installed state-of-the-art Flow Benches to ensure performance consistency, and compliance to strict emission norms. Our Tool Room facility that Designs and Manufactures a variety of Dies, Fixtures, Toolings and Gauges is the best in the industry. Our SAP ERP system has been running successfully since April 2007.
Our manufacturing processes are functionally and serially arranged to incorporate SPACO's philosophy of commitment to excellence in every aspect. The preliminary process starts with the pressure die casting of the Main Body. Thin-walled castings of complex geometry require strict control of various process parameters and sound manufacturing methods.
Precision Machining & Assembly of the carburettor circuits is carried out on special purpose machines to ensure repetitive quality & reliability. High precision & finely calibrated components like jets, atomizers and needle jets are manufactured in-house on sophisticated customized machine tools designed specially for this purpose.
Since 1998, we have added new generation VMC machine tools, flow benches to make our processes more precise and conforming to the strict quality standards. After surface treatment and a series of testing procedures the carburettors are assembled in a dust-free environment. Online and Scansys flow benches are used to ensure flow values.
The final inspection ensures that the products stand by SPACO's stamp of excellence. Investment in machinery modernization is made on a continuous basis. Training of our personnel on modern manufacturing techniques makes our process innovative and quality oriented. A constant dialogue with vehicle manufacturers and close interaction with them enable us to keep pace with rapid changes in technology.
Read More »

Contact Information

Spaco Technologies India Private Limited

  • Ravi Singh
  • D-2/62, MIDC,Chinchwad, Pune 411 019, Maharashtra.
top