Surgical Equipment Dealers in Pimpri Chinchwad, Pune

It can also be advantageously used for most other applications on gases vapours, liquids and saturated steam systems involving small discharge capacities. The SRV12 Series valves are specially designed for steam but can be used on, liquids and gas as well. The valves are designed as per API 526 and meet the requirements of ASME Sec VIII-Division. SRV12 Valves are offered with IBR Certification Form III-C. The valves have a solid nozzle screwed into the valve body and is fully guided at the upper section of the valve body, increasing the strength of the valve assembly. Specially designed disc holder ensures full lift within 5% increase of pressure above the set pressure value. i.e. Over-pressure of maximum 5%. Blowdown of a maximum of 5% is achieved in this design. Superior lapping of the seat area ensures a high level of leak tightness at seat. Disc lifts above 14 of nozzle diameter which ensures that the certified flow of the safety valve is discharged. The Spring is selected and assembled with great care so that the valve operates precisely and a good leak tightness is achieved.

Provide natural light to ensure the comfort & relax of patients. Protection Glass Using high quality poly carbonate to ensure The safety of LED’s From dirt Maximize light clarity Scratch proof Protective Glass Technical Data Adjustable color temperature (3,800k – 4,800k) Intensity ( 1,00,000 Lux to 2,00,000 Lux) Single arm and Double arm Ceiling Light Floor Model light Diameter of light (690mm) Power supply - 220V/50Hz AC Power Consumption – 50 Watt Special function - Dual Memory Function

Pressure Relief Safety Valve (Flanged End) exceeding set pressure the valve opens to discharge the excess built up pressure. after relieving excess pressure, the valve automatically returns to the original position. The SS internals (Seat & Plug) Ensure that there is no leakage while in operation. By replacing only the spring it is possible to change set pressure range.

The one-stop-shop for different types of time cycled Neonatal Ventilator is named as Flowline Impex. We are one of the foremost neonatal ventilator exporters as well as suppliers. You will be pleased to know that we present durable neonatal ventilator at the most reasonable price. Neonatal/ Padiatric respirator/Ventilator "Shreeyash "pc 900/903 is a preesure controlled . time cycled,continuos flow Respirator,intended for neonatal &pedeatric use seven different modes of ventiletor enchances user's efficiency to match the varied patient condition's. SPECIAL FUNCTION : provision of bias flow (neonatal &pediatric),help line facility,auto mode ,formula key etc are usefull features of this equipment. A large 4 lines LCD display indicates various warning ,message,like actual PEEP,inspiratory pause,spontaneous&mandatory time period in SIMV mode,patient in apnea,various formulas,expired tidal volume,minutes volume,peak flow,(only in pc 903)etc.That are of ut most importance to clinician. Considering the India condition this ventilator is designed to work on very low pressure.It work only on 1.5 PSI(100cm H20) as compared to 30 PSI (2100cm H2O) as contemporary. This helps to save a lot of oxygen.The entirer computerized controls works on very low power(only 12 V DC). The compresser supplied along with unit has auto shut off hence it saves lot of electricity reduces the ware&tare of compresser & can help run the unit for 10 min.In case of power failure.(depending upon the settings) Modes Controlled Mandatory Ventilationlation Controlled Mandatory Ventilation +sign Assist Controlled Mandatory Ventilation Synchonized iIntermittent Mandatory Ventilation + pressure support Patient Triggered Ventilation Continuous Positive Airway pressure plus pressure support pressure Controlled Inverse Ratio Ventilation (Separate mode key not provided) Alarms: High Air Way pressure * Low Air Way pressure *Apnea * High Respiratoy Rate * Gas failure

We are offering Patient Trolley that is used for safe and comfortable transfer of patients. In hospitals and other medical centers, Patient Trolley is used to transfer patients between intensive care units, surgical departments, wards etc. It allows transferring of patient without lifting him/her from transfer platform and without moving the trolley carriage from designated field. Our Patient Trolley is specifically designed to assist in all emergency equipments such as oxygen, face mask, suction etc. We make available Patient Trolley in numerous sizes to suit all the requirements of health sector.

Litex is the pioneer in India in manufacturing the infrared lamps. our company manufacturing the good quality of IR lamps since 1981. we are exporting most of lamps since our inception of company. our product is accepted all around the world.

Cooler Bell Housing for Industria

We are offering a quality assured range of Autoclaves in the market. This Autoclave is used for industrial processes for sterilization of products. These Autoclaves have sturdy construction, and offer good sterilization. These Autoclaves are in horizontal form, and have high capacity for bulk sterilization of products. Autoclave reactor main functionThe autolave of the AAC block machine is also called Autoclave reactor, is a large pressure vessel equipment. It is used for sand-lime brick, fly ash bricks, aerated concrete block, a new light wall materials, concrete pipe and other construction products.So far,the autolave  not only used in Silicate Building Products, but also used in chemical, pharmaceutical, rubber, wood, plaster, glass, insulation materials, textile workers, military, and other areas of the products of steam-cured. The autoclave is horizontal unit made by steel, the autoclave cover is made by the whole steel plate of 16mm.   Minimum Order Quantity : 1 NosPrice : 32 Lac to 55 Lac

Respiratory Equipments, Safety Equipment, Safety Hand Glove

Manual Operating Table, Mechanical Engraving Machin

Aseptic Sterilizer is used for packaging dairy products and food in aseptic bags or cartons to avoid any kind direct or indirect contact with the atmosphere. Moreover, we also offer plate and tubular heat exchangers for aseptic sterilizers, with automatic controls along with inbuilt CIP and back wash system.

Flush Bottom Valves, Plug Valves, Manual & Automation Lined Valve