Swastik Enterprises Kasba, Pune, Maharashtra

Quickly take accurate humidity and temperature readings in the air. Temperature and humidity are two important factors in maintaining optional levels and good indoor air quality. The Fluke 971 is invaluable for facility maintenance and utility techniques.   Measures dew point and wet bulb   99 record storage capacity   Min/Max /Avg Data Hold   Twist- open protective cap   Low Battery indicator

Universal, economical tachometer measuring rotational or surface speed either in contact or non-contact way. Widely used to measure rotational speed of motors, conveyer belts and other moving or rotating systems.   Easy to select units and mode functions   Auto power off function   User selectable units for contact measurement: RPM, m/min, ft/min, yd/min   Non-contact measurement in RPM   Measures rotational and surface speed

The Amprobe SM-10 Sound Level Meter is designed to meet the measurement requirements of Safety Engineers, Health, Industrial safety offices and Quality Control in various environments. It offers two types of measurements: A and C weighting.The A weighting is for general noise sound level and the C weighting is for measuring sound level of acoustic material control in various environments (ie 94dB 1 kHz etc...). The SM-10 conforms to the IEC651 Type 2, ANSI S1.4 Type 2, and JISC1502 requirements for Sound Level Meters. Which means the SM-10 uses two different weighting filters required by the IEC 651 and ANSI S1.4 Type 2: the A-Weighting and the C-Weighting audio filtering.     Designed to meet the measurement requirements of Safety Engineers, Health, Industrial safety offices and quality control in various environments.   A and C weightings for checking compliance with safety regulations as well as acoustic analysis   Measuring ranges:A Weighting 30 ~130dBC Weighting 35~130dB   Display with 0.1dB steps on a 4 digits LCD   Slow (1 sec) and fast (125ms) response settings to check peak and average noise levels   Accessories supplied: Carrying case, windscreen, user manual and 9V Battery

Application of Regulated DC Single Power Supply   designed as a Constant Current (CC) and Constant Voltage (CV) source for use in laboratories, industries and field testing. With compact size, it provides DC output voltages for Analog and Digital testing. They provide high regulation and stability with either Digital 3-digit display for voltage & current is provided to read the values, the unit is equipped with coarse and fine controls for adjusting the voltage and current outputs These two parameters can be switched to display either voltage or Current. excellent line and load regulation and is provided with protective circuits to ensure trouble free operation. All the outputs are protected from short circuits and overload. Technical Specifications   Input Power : 230VAC+/- 10%   Frequency : 50 ± 3 Hz.   Line Regulation : Better than 0.05% for the Input variation of +/-10%   Load Regulation : Better than 0.05% from no Load to full load.   Static Regulation : ±1%.   Mode : CC&CV   Ripple Noise : Less than 3 mV rms   Protection : Short Circuit and Over load with beep   Meter : 2Voltmeter & 2Ammeter(Digital)

Application of Regulated DC Dual Power Supply Testers   designed as a Constant Current (CC) and Constant Voltage (CV) source for use in laboratories, industries and field testing. With compact size, it provides DC output voltages for Analog and Digital testing. They provide high regulation and stability with either Digital 3-digit display for voltage & current is provided to read the values, the unit is equipped with coarse and fine controls for adjusting the voltage and current outputs These two parameters can be switched to display either voltage or Current. excellent line and load regulation and is provided with protective circuits to ensure trouble free operation. All the outputs are protected from short circuits and overload. Technical Specifications   Input Power : 230VAC+/- 10%   Frequency : 50 ± 3 Hz.   Line Regulation : Better than 0.05% for the Input variation of +/-10%   Load Regulation : Better than 0.05% from no Load to full load.   Static Regulation : ±1%.   Mode : CC&CV   Ripple Noise : Less than 3 mV rms   Protection : Short Circuit and Over load with beep   Meter : 2Voltmeter & 2Ammeter(Digital)

The Fluke 9040 is effective for measuring phase rotation in all areas where threephase supplies are used to feed motors, drives and electrical systems. The Fluke 9040 is a rotary field indicator and can provide clear indication of the 3 phase via an LCD display and the phase rotation direction to determine correct connections. It allows rapid determination of phase sequence and has a voltage (up to 700V) and frequency range suitable for commercial and industrial applications. Test probes supplied with the instrument have a variable clamping range for safe contact, especially in industrial sockets.   3 phase indication   Indication of phase rotation   Indication of motor rotation direction   Contact free determination of the rotation direction of running motors   Clear LCD display   No battery required

Features of VIPS-VFT 01   Configurable for 1 phase and 3 phase   Individual faults can be deactivated as per system requirement   Programmable delay and hysteresis   Auto/manual reset option   Consistent reliability with high accuracy   LED indication for healthy and faulty status Specifications Of VIPS-VFT 01   Display : 3 digits, 1 raw / 7 segment LED display   Digit Height: 0.56” (14. 3 mm)   Dimension:90x45x75 mm (LxBxH)   Set Point: Voltage: /- 25% of nominal, Hysteresis: 1%-10% Scroll time: 5 seconds   Dimension:90x45x75 mm (LxBxH)   Relay contacts: 2 Potential free Contact (NO, C & NC

The Amprobe LM-100 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or footcandle (fc) units. The LM-100 measures a wide range of light up to 20,000 fc or lux with an accurate, high resolution of 0.01 fc/lux.   Measure in Lux or Footcandles, front panel switchable   Measuring Range to 200000 Lux or 20000 Foot candles   Silicon photodiode sensor and filter   MAX ability to show high readings   Includes protective sensor cap   Large, 3-1/2 digit display    

The ultimate component checker measures inductance, capacitance, resistance, transistors, diodes and microwave diodes   Plug-in test slots and test leads with threaded alligator clips Data Hold and Max Hold “Zero Adjust” Pot for OhmsBatteries and User Manual Low Battery Indication Auto-Power Off

Product Description Features of Digital Multimeter |KM-801   Industrial Grade Rugged Digital Multimeter Sensing : Average   Automatic Zero adjustment.   Peak Hold facility   OverLoad Protection 500V DC or AC rms   Auto range on Frequency range & measurement upto 2 MHz.   Logic Test, Diode & Continuity Test & Transistor hFE Test.   Low battery indication Specifications Of Digital Multimeter |KM-801   Sensing : Average Sensing.   Basic Accuracy : ±(0.5%rdg + 1dgt)   Display : 3¾ digit Max. 3999 Counts Large LCD display   Display Size : 17.5 mm   Polarity : Automatic, positive implied, (-) negative polarity indication   Measurement Rate : 2.5 measurements / sec.   Over range Indication : ‘OL’ is displayed.   Low battery : The Low Battery sign is displayed when the battery voltage drops below the operating Voltage.

Features of TBS 1072B   100 MHz bandwidth   2 channel   Up to 2 GS/s sample rate on all channels   2.5k point record length on all channels   Advanced triggers including pulse and line-selectable video triggers   34 automated measurements   Dual window FFT, simultaneously monitors both the time and frequency domains   Built-in waveform limit and trend plot testing   Connectivity Of TBS 1027B   USB 2.0 host port on the front panel for quick and easy data storage   USB 2.0 device port on rear panel for easy connection to a P   Multiple-language user interface   7 inch WVGA (800X480) Active TFT Color Display   Multiple-language user interface   Small footprint and lightweight - Only 4.9 in. (124 mm) deep and 4.4 lb.(2 kg)   Automated, extended data logging feature

Features of Digital Clampmeter |KM-088   This Digital Clampmeter has AmpTipTM low-current range calibrated at Jaw-tip for slim-conditions   This Digital Clampmeter has MAX/MIN/AVG Recording mode (Auto ranging)   This Digital Clampmeter has VFD-V & Hz for fundamental V/Hz of most Variable-Frequency-Drives   This Digital Clampmeter has Display Hold & Non-Contact EF-Detection (NCV)   This Digital Clampmeter has Back-lighted easy-to-read LCD display   This Digital Clampmeter has Flashlight for easy operation in dim areas Specifications Of Digital Clampmeter |KM-088   Sensing : Average Sensing.   Basic Accuracy : ±(0.8%rdg + 1dgt)   Display : 3½ digit Max. 1999 Counts liquid crystal LCD display   Display Size : 13.5 mm   Operating Temperature : 0°C to 50°C; < 70%R.H.   Measurement Rate :2.5 measurements / sec.   Over range Indication : ‘1’ or “-1” is displayed.  

Insulation Resistance Tester| KM 370 | KM 379   Digital MΩ Hi tester & Digital multimeter.   Overload Protection   The meter can display actual insulation test voltage. LED light is used to indicate high voltage output status   Measures Insulation Resistance & AC & DC Voltage   Backlight , function characters indication   Auto power off   Low battery indication Specifications Of Digital Clampmeter |KM-2709   Basic Accuracy : Based on ±(0.5%rdg + 5dgts)   Display : 3¾ digit Max. 3999 Counts liquid crystal display   Sampling Rate : 2 times per second   Short Circuit : 1.5mA   Measurement time : ½/10min   Auto range : “OL” will be displayed for overload   Operating Temperature : 0°C-40°C, < 75%R.H.

Amprobe AMB-50 High-Voltage Insulation Tester has the necessary features for professional insulation diagnostics. It features calculation of PI, and DAR parameters. The PASS/FAIL comparison function helps to improve testing productivity. Readings are clearly displayed on a large backlit LCD display. Windows compatible PC Software and USB communications port serve for connecting the instrument to the PC and management of the recorded test data.   R (t) graph plots resistance in real- time to illustrate a response to the applied voltage/li> Programmable timer   Automatic discharge of test object after measurements is complete   Fast Chagrining and testing   Dual power source: receptacle or rechargeable batteries

IR-710, IR-712, IR-720, IR-730 and IR-750 The Amprobe IR-700 series of infrared thermometers is a complete line of high performance diagnostic tools designed for HVAC/R, electrical, industrial maintenance, automotive as well as quality control and fire prevention applications.     Extremely accurate and reliable   Precise measurement with distance to spot ratio from 10:1 to 50:1   Wide temperatures ranges available up to -58°F to 2822°F (-50°C to 1550°C )   Rapid response time   Stores up to 99 data points (IR-750 only)   Thermocouple input (IR-750 only)   USB interface (IR-750 only)

Product Description   Scientech 4060C is an low cost extremely versatile Function Generator. It has a wide frequency range with LCD display for frequency. The output can be varied upto 20 Vpp (open circuit) and can be attenuated to -60 dB. All outputs are short-circuit proof. It has TTL out and is also available for Digital Lab experiments. Additional features indicating its high quality include constant amplitude flatness and low distortion factor of signals. It is a new laboratory standard offering low cost solution to all your needs.   Product Features   Frequency Range 0.1 Hz to 1 MHZ   Operating Modes: Sine, Square, Triangle and DC   Low Distortion   Gold Plated BNCs.   3 Year Warranty  

Product Description   Scientech 4060C is an low cost extremely versatile Function Generator. It has a wide frequency range with LCD display for frequency. The output can be varied upto 20 Vpp (open circuit) and can be attenuated to -60 dB. All outputs are short-circuit proof. It has TTL out and is also available for Digital Lab experiments. Additional features indicating its high quality include constant amplitude flatness and low distortion factor of signals. It is a new laboratory standard offering low cost solution to all your needs. Product Features   Frequency Range 0.1 Hz to 1 MHZ   Operating Modes: Sine, Square, Triangle and DC   Low Distortion   Gold Plated BNCs.   3 Year Warranty  

Fluke Visual IR Thermometers combine the convenience of a spot thermometer with the visual advantage of an infrared camera creating a brand new tool category.     Detect issues instantly with built-in digital camera   No training required   Built-in digital camera   Breakthrough affordability   SmartView reporting software   Key features of a Visual IR Thermometer Breakthrough afforadbillity

These electrical testers have all the advantages of traditional solenoid testers, with none of the typical drawbacks. Use all 3 voltage detection methods – light, sound, and vibration, to work more efficiently in noisy environments, dimly lit areas, or tight spaces. Built-in flashlight, GFCI trip capability, and the legendary ruggedness you expect from Fluke, make these an excellent choice for most residential, commercial, and industrial applications..   3 forms of ac/dc voltage detection: light, sound, and vibration for added user protection and convenience   Detect live voltage even when the battery is dead   Extra heavy-duty, replaceable test leads for more flexibility and durability   CAT IV 600 V, CAT III 1000 V rated for added user protection Continuity beeper   Bright LED flashlight for work in poorly lit areas   On/Off switchable beeper, selectable according to your environment.

Combines bright light and voltage detection in one pen style design     Dual sensitivity   Detects voltage from 90V to 600V AC   Detects voltage from 90V to 600V AC   Blue light means you’re close   Red light means you’re at the source   Rated to CAT IV 600V

These lightweight, affordable insulation testers are perfect for troubleshooting, commissioning and preventive maintenance applications.

The Fluke 59 Mini Infrared Thermometer is the perfect combination of small size and big capability. With laserprecision targeting and 2% basic accuracy, the Fluke 59 Mini IR Thermometer enables professionals to diagnose heating and ventilation problems and monitor the temperature of electrical motors and electrical panels without contact. The 59 Mini puts quick, reliable temperature checks at your fingertips.   8:1 distance to spot ratios measures a 10 cm spot from 10 meters to target just what you want   Small in size easily fit in your pocket   Backlit display for easy reading in dark work are   ± 2% basic accuracy gives you readings you can trust   measurements Ranges - 18°C to 275°C(0°F-525F)   1 Year Fluke India warranty

Designed for a basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for residential / commercial electricians and heating and air conditioning techniques. This small lightweight multimeter fits comfortable in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multimeters, Fluke 101 digital multimeter is your best choice.     Product highlights   CAT III 600 V safety rated   AC/DC Voltage, Resistance, Capacitance, Frequency measurment   Basic DC accuracy +0.5%   6000 counts   Diode and continutiy test with buzzer   Fluke India Calibration   1 Year Fluke India warranty  

Features of VIPS 98   User settable trip level and timer delay   DIN rail Mount   CBCT open circuit detection   CBCT available in various sizes   Leakage current display in percentage   Specifications Of VIPS 98   Relay Contacts : 1 potential free contact(NO,C & NC)/ 2 C/O Optional   Contact Rating: 6 A/ 230V AC/ 28V DC   Leakage Current: via CBCT (0.03,0.10,0.30,0.50,1.0,3.0,5.0,10.0,20.0 & 30.0 A)