Voltage Measuring Instruments Dealers in Pune (63 products available)

It is used to pin-point underground cable faults in power transmission, distribution cable networks in acoustic mode with the help of suitable surge wave receiver. Key Features Pin-point location of cable faults in Low, Medium and High voltage cables by acoustic method. Output voltage selectable ranges 8kV, 16kV, 32kV continuously variable High energy of 1000 Joules at each range (Optional 2000J). Full energy delivering capacity at each select range. Single Impulse and 1.5, 3 & 6 seconds intervals Sequence Pre-location of cable fault distance with suitable pre-locator unit in ICM mode. Easy to connect with arc reflection filter and pre-locate fault distance in SIM mode. Power Supply 230V AC + 10%, 50 Hz, Single phase HT Network 33Kv Protection Class – IP 54

• Supply: 1 Phase 230 V AC, 50 Hz
• Cutout dimensions: 92 (W) X 92 (H) mm
• Over Voltage: Range-210V-270V, Default- 260V.
• Dimension: 96(W) X 96 (H) X 80(D) mm
• Display: 3 digit 0.5 7 sec LED
• Under Voltage: Range-170V-120V, Default- 170V.
• Over Load: Range-1.0A-999.9A, Default- 10.0A.
• Over Voltage Sense Delay: Range- 1 sec-60 sec, Default-2 sec.
• Under Voltage Sense Delay: Range- 1S-60S, Default-2S.
• Over Load Sense Delay: Range- 1 sec-60 sec, Default-2 sec.
• Resolution: 1V For Voltage 0.1 HZ for Frequency , 1A For current >=100& 0.1 A For current < 100.
• CT Ration: Settable 30A/5A to 999A /5A, Default- 50A/5A.

Our packing system is systematized in such a manner that we can handle even bulk packaging with ease. Moreover, our packing experts take care of the customized as well as standard packing demands of the clients. We have become a preferred choice of the patrons owing to our timeliness and client centric approach.

Pen Phase Sequence Indicator and Conformity TestThe HT70 pen voltage detector permits both to quickly verify the presence of AC voltage on any type of electrical installation (sockets, cables, fuses, switchboards, etc.) with and without direct contact and also to perform phase sequence indication and conformity test on generic three phase plants by using red and green fixed and blinking LED indications. HT70 is designed according to IEC/EN61010-1 safety standard in CAT IV 1000VFunction • Detection AC voltage from 100V to 1000V to ground• Phase sequence and conformity test with 1 wire method• Working frequency: 50/60Hz• With a without contact measurements• LED red and buzzer indication• Practical pen clip• Safety: IEC/EN61010-1, CAT IV 1000VStandard• Batteries• User manual• EMC 2004/108/CE Directive• CE MARK• LVD 2006/95/CE Directive

• Type: Voltage Regulators
• Material: Aluminium, Brass, Fiberglass, Frp, Glass, Plastic, Porcelain
• Certification: CE Certified, CQC Certified, IAF Certified, ISI Certified
• Color: Creamy, Golden, Green, Light Green, Metallic, Off White, Shiny Silver, Silver, Sky Blue, Yellow
• Condition: New, Old
• Operating Temperature: -25 +85deg C, -40 +70deg C, -45 +55deg C, -70 +40deg C
• Automatic Grade: Manual, Semi Automatic
• Feature: Accurate Reading, High Performance, Lightweight Specifications, Longer Service Life, Robust Construction, Rust Proof, Shocked Proof
• Current Type: AC
• Puncture Voltage: 0-50KW, 100-200KW, 200-400KW, 400-800KW, 50-100KW
• Electricity Volume: 1, 2, 3, 4, 5

• Feature: Adjustable sensitivity, Visual and acoustic signal, Measuring point illuminatio

• Automation Grade: Automatic
• Used for: Exact pin point location of faults in underground LT power cables
• HV output: 0- 4kV, 500 Joules
• Dimensions: 600x380x550 mm
• Voltage: 0- 4kV
• Weight: 60 Kg

The Low Voltage Surge Testers (ST - 4) available with us are manufactured using latest technology and premium quality components that ensures excellent performance. Low Voltage Surge Tester is an excellent instrument for tracing the fault locations in underground LT power cables. Customers can avail long performing and portable Low Voltage Surge Tester from us at affordable market price.Working of Low Voltage Surge Tester : Low Voltage Surge Tester is equipped with energy impulse storage capacitors that can be charged and discharged automatically into the faulty cable. The stored energy from energy capacitors discharges into the exact point of fault in cable that creates strong vibrations underground. Sensitive Seismic microphone picks up these vibrations with the help of Duophone receiver for locating the exact point of fault.Attributes : Portable Mounted on castors Easy to carry and use on the field Manual and auto operation of impulse discharge Capacity enhancement possible Equipped with energy storage impulse capacitors Built in Current coupler to facilitate prelocation Application Areas : Power sector Electrical contractors Large PSU Refineries Cement Industry Textile Industry Chemical Industries Electricity Boards

• Phase: Single Phase
• Power Source: Electric
• Frequency: 50 Hz
• Power: 5 kV
• Voltage: 230 V

We are engaged in manufacturing and supplying a wide range of Automatic Voltage Regulator, which is known for its sturdy construction and compact size. These ensure no breakage in supply during correction and provide full proof protection from spike surge. The features are : • Rugged design • Very fast correction • Compact size • No break in supply during correction • Protects from spikessurge

• Power Supply: 230V±10%, single phase, 50Hz

Test Voltage DC : 0 to 5000 V continuously variable by multi turn potentiometer AC : 0 to 5000 V continuously variable by multi turn potentiometer (with AC or DC test voltage selector switch) Tripping Current Adjustable 1.0 to 30.0 mA by press to set switch and potentiometer on mA meter OR Test Voltage and leakage current programmable by external 0 to 10 V DC Accuracy class of Test Voltage ± 0.1%± 2 least count Resolution: 4½ digit Accuracy of leakage Current ± 0.5% ± 2 least count Resolution: 3½ digit Display Digital Voltage: 4½ digit , Current: 3½ digit Automatic Timer 1 to 999 second Settable by thumbwheel switches on 7 segment 3 digit display With timer ONOFF switch Indication for PassFail Audio (Buzzer) and visual (Neon) alarms when HV is ON, Output Trips when breakdown occurs i.e. leakage exceeds than set current. Test FAIL indicated by LED If device under test successfully handles the test voltage for the set time duration then Test PASS indicated by LED Power Supply 230V±10%, single phase, 50Hz

• Warranty: 1 Year
• Model Number: KM 500HP
• Voltage: 500KV
• Weight: 500 grams
• Battery Type: AAA

• Brand Name: SMEM
• Application: Laboratory, Industrial
• Model: SM-5PT

RR AC HIGH VOLTAGE BREAKDOWN TESTERS ARE SPECIALLY DESIGNED FOR TESTING DIELECTRIC PROPERTIES OF VARIOUS INDUSTRIAL APPLIANCES, PRODUCTS LIKE MOTORS, TRANSFORMERS, SWITCHGEARS,CABLES, INSULATING MATERIALS, SAFETY GLOVES – BOOTS, RUBER SHEETS, INSULATORS . THESE H.V. TESTERS ARE A MUST FOR THE WIRE & CABLE INDUSTRY, SWITCHGEAR MFG, POWER & DISTRIBUTION INDUSTRY, POWER PROJECTS, SUBSTATIONS AND ELECTRICITY BOARDS.

• AC High Voltage Breakdown Tester: 5, 10, 100
• Operating Power: 230V 50 Hz or 110V 60 Hz

Voltage tester, Audio & Visual Alarm when HV on & off. • Test ON & OFF switch to start & interrupt Test. • Precise Trip Current Setting or Press to set switch for Leakage Current. • Inbuilt timer with Selector switch or variable by thumbwheel setting. • DC High Voltage Tester is useful for measurement of Breakdown Voltage of transformers, Electrical & Electronics instruments, Motors, Components, Control Panels etc.

• Range: `Up to 6000 KW

Working Principle FCMA Frequency controlled Automatic Slip Regulator are based on frequency dependent resistance design which provide a constant low starting current with automatically reducing resistance in congruence with motor speed to provide constant torque characteristics & accelerate the motor Frequency Slip Regulator / Frequency Rotor Controller accelerates driven equipment from stand still to full speed smoothly without any jerks. The FCMA Rotor Starter & Slip Regulator is connected to the Rotor Terminals of the motor, so that the starting current is limited to a low value with a required starting torque. As the motor speed increases the resistance of FCMA reduces Steeplesly to keep the current & torque constant so that the load is accelerated.     Salient Features FCMA technology provides slip dependent automatic resistance variation. Provides constant current constant torque acceleration Starting torque and starting current adjustable from 100% - 250% depending upon load and motor characteristics. Built in RUN mode bypass contactor Virtually no maintenance. No moving parts Frequency Controlled Slip Regulator  Only FSR Starter / FSR Starter + Stator Panel  

• Open Circuit Voltage: 0to5KVOR0to 10 KVAC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
• Test Current: 2 mA to 20 mA OR 3 mA to 100 mA
• Accuracy of Reading Power: ±2%
• Requirements Safety: 230 volts AC, ± 10%, 50/60 Hz
• Precautions: Voltage on test terminals. High Voltage on test jig appears only after the variac is set to zero and gradually increased. There is a trip device to trip if the current increases than the required value
• Trip settings: The tripping can be reset by a pot which can be varied as peruse requirement
• Open Circuit Voltage: 0 to 30 KV OR 0 to 100 KV AC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
• Test Current: 5 mAto 50 mA OR 10 mAto 100 mA
• Accuracy Of Reading: ±2%
• Power Requirements: 230 volts AC, ± 10%, 50/60 Hz
• Open Circuit Voltage: 0 to 5 KV or 0 to 10 KVAC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
• Test Current: 2 mA to 20 mA OR 3 mA to 100 mA
• Accuracy of Reading Power: ±2%
• Requirements Safety: 230 volts AC, ± 10%, 50/60 Hz
•  : Protection provided with zero start to prevent accident availability of High

• Power Supply: 230V±10%, single phase, 50Hz

Voltage tester Adjustable 1.0 to 30.0 mA by press to set switch and potentiometer on mA meter OR Test Voltage and leakage current programmable by external 0 to 10 V DC. Audio (Buzzer) and visual (Neon) alarms when HV is ON, Output Trips when breakdown occurs i.e. leakage exceeds than set urrent.

Our voltage Regulator is Specifically Designed and Developed to Fulfill the Requirements of Our Clients Across India. the Products are Extremely Useful for Automatically Maintain a Constant Voltage or Electrical Level. Our Voltage Regulator is Available At a Reasonable Market Price for Our Customers. We Obtain Our Voltage Regulator from Reliable Sources to Provide Tension Free and Efficient Solution for Our Clients.

• High Spike proteciton: Over Current Protection
• Driven by Potentiometer: Operated by 0-10V Analog
• Adustable Set Point for Current limit: Soft Starter
• Provision of Proximity Sensors: Short Circuit Protection
• Built in Delay TImers: ON-OFF delay

We are offering voltage regulator. Vibratory controller ( voltage regultor ) is mainly used in bowl feeder system and linear feeder system.

• Features: Longer service life , Optimum performance
• Item Code: TK-2020

We are the well-known Importer and Supplier of Test Equipment. We source these Test Equipment from industry̢۪s trusted manufacturers. Our state of the art Test Equipment are in compliance of stringent quality norms, thus in huge demand worldwide. These Test Equipment are exclusively made for precision measuring and obtaining accurate results.

• Display Type: analog
• Country of Origin: Made in India
• Usage/Application: Industrial
• Brand: Rishabh
• Voltage: 500V
• Size: 96x96mm
• Phase: 1ph

• Phase: Three Phase
• Application: Industrial, Laboratory
• Size: 96 x 96 mm
• Model: AVM-31
• Input: Three Phase
• Supply: 24 V DC/110 AC/230V AC

• Brand Name: Testo
• Usage: Industrial, Laboratory
• Operating Temprature: 0 to 40 Degree
• Minimum Order Quantity: 1 Piece

• Condition: NEW
• Feature: Automatic DCV, ACV, & Continuity Selection, High input impedance & Auto Hold, Auto Power Off

• Phase: Single Phase
• Condition: New
• Application: Industrial
• Brand Name: Tekson Electronics
• Color: Black
• Brand: Microtek
• Machine Type: AC Regulators

• Brand Name: CDIL
• Colour: Black
• Minimum Order Quantity: 1000 Piece
• Regulator Type: Linear Regulator