It is used instead of fertigation tank. It also delivers plant nutrient directly into the wetted zone. It is equipped with in-built check valve for protecting the injected liquid against back flow. It can be used with large variety of chemical and also needs less pressure. APPLICATIONS It is used for effective fertigation for different water soluble and liquid fertilizers through micro irrigation system on quantitative basis.
It is used instead of fertigation tank. It also delivers plant nutrient directly into the wetted zone. It is equipped with in-built check valve for protecting the injected liquid against back flow. It can be used with large variety of chemical and also needs less pressure. APPLICATIONS It is used for effective fertigation for different water soluble and liquid fertilizers through micro irrigation system on quantitative basis.
Body of the nozzle is made of bronze, has brass bearings sleeve and stainless-steel springs. It has a trajectory angle of 27°. It is available in engineering plastic and in a 3⁄4″ BSP Male Thread Connection. APPLICATIONS All close spacing crops with shifting ( As Portable Syetem ) Spices Vegetables Cereals Pulses Oil Seeds etc SPECIFICATIONS Plastic Nozzle :. ¾” with discharge 1400 LPH to 2200 LPH in 1 kg/cm2 to 3 kg/cm2 pressure. Brass Nozzle :. ¾” with discharge 1800 LPH to 2100 LPH in 1 kg/cm2 to 3 kg/cm2 pressure.
Body of the nozzle is made of bronze, has brass bearings sleeve and stainless-steel springs. It has a trajectory angle of 27°. It is available in engineering plastic and in a 3⁄4″ BSP Male Thread Connection. APPLICATIONS All close spacing crops with shifting ( As Portable Syetem ) Spices Vegetables Cereals Pulses Oil Seeds etc SPECIFICATIONS Plastic Nozzle :. ¾” with discharge 1400 LPH to 2200 LPH in 1 kg/cm2 to 3 kg/cm2 pressure. Brass Nozzle :. ¾” with discharge 1800 LPH to 2100 LPH in 1 kg/cm2 to 3 kg/cm2 pressure.
Body of screen filter is also made of reinforced polypropylene for durability. It provided with non-corrosive stainless steel filter mess which is low in maintenance and easy to install. It supports wide range of flow rate and comes with three way valve assembly for easy monitoring of inlet and outlet pressure. The stainless steel mesh is available in 80, 120 & 150 mesh.
APPLICATIONS
It is used when silt and clay particles are in abundant quantity into water or when the water is muddy. It is also effective in filtering organic as well as inorganic contaminates.
Body of screen filter is also made of reinforced polypropylene for durability. It provided with non-corrosive stainless steel filter mess which is low in maintenance and easy to install. It supports wide range of flow rate and comes with three way valve assembly for easy monitoring of inlet and outlet pressure. The stainless steel mesh is available in 80, 120 & 150 mesh.
APPLICATIONS
It is used when silt and clay particles are in abundant quantity into water or when the water is muddy. It is also effective in filtering organic as well as inorganic contaminates.
It has vertical design to provide more depth and degree of filtration. Body of the filter is powder coated from inside and outside for high durability. It has more space for dirt collection hence which minimises the frequency of back washing. It is provided with two inlets and outlets to facilitates more installation options. We also provide an optional semi-automatic and full automatic assemblies which are easy to maintain.
APPLICATIONS
It is used when silt and clay particles are in abundant quantity into water or when the water is muddy. It is also effective in filtering organic as well as inorganic contaminates.
It has vertical design to provide more depth and degree of filtration. Body of the filter is powder coated from inside and outside for high durability. It has more space for dirt collection hence which minimises the frequency of back washing. It is provided with two inlets and outlets to facilitates more installation options. We also provide an optional semi-automatic and full automatic assemblies which are easy to maintain.
APPLICATIONS
It is used when silt and clay particles are in abundant quantity into water or when the water is muddy. It is also effective in filtering organic as well as inorganic contaminates.
We offer a wide range of Round Drip Line of the highest quality under the brand name “BHUVA”. Round drip line are available in various flow rates and emitter spacing. The cylindrical dripper is designed with a long and wide labyrinth which provides turbulent flow to minimize formation of residues and settling of soil particles hence providing an outstanding clog resistance. It is manufactured with to outlets, additional outlet helps to eliminate the intrusion of small particles when the water is shut off. It also has a large inbuilt filter to prevent physical impurities entering into the dripper.
APPLICATIONS
All close spacing crops.
As a loop system in wide spacing crops
With group spacing for fruit orchards
Suitable for surface as well as sub surface installations.
Can be used crops like sugarcane, cotton, banana, strawberry etc.
SPECIFICATIONS
Nominal operating pressure – 1 bar.
Available in 1 lph to 4 lph flow rates.
Drippers’ spacing of 15cm, to 120cm and above.
Drip line thickness – 0.2mm (8mil) to 1mm (40mil).
We offer a wide range of Round Drip Line of the highest quality under the brand name “BHUVA”. Round drip line are available in various flow rates and emitter spacing. The cylindrical dripper is designed with a long and wide labyrinth which provides turbulent flow to minimize formation of residues and settling of soil particles hence providing an outstanding clog resistance. It is manufactured with to outlets, additional outlet helps to eliminate the intrusion of small particles when the water is shut off. It also has a large inbuilt filter to prevent physical impurities entering into the dripper.
APPLICATIONS
All close spacing crops.
As a loop system in wide spacing crops
With group spacing for fruit orchards
Suitable for surface as well as sub surface installations.
Can be used crops like sugarcane, cotton, banana, strawberry etc.
SPECIFICATIONS
Nominal operating pressure – 1 bar.
Available in 1 lph to 4 lph flow rates.
Drippers’ spacing of 15cm, to 120cm and above.
Drip line thickness – 0.2mm (8mil) to 1mm (40mil).
Features
Precision moulded valves made from HDPE Material, suitable for pipe line systems up to 16 bar
Excellent chemical and corrosion resistance
Very low frictional head losses
High fluid carrying capacity
Valves are serviceable in field
Made o high quality engineering materials
Suitable for pipes made as per IS : 4985 for agriculture
Applications
Micro Irrigation System and Lift Irrigation Systems for Agriculture
Specifications
Sizes : 32mm to 140mm
Available In single Flange with Female Thread For Join QAC HDPE pipe.
Features
Precision moulded valves made from HDPE Material, suitable for pipe line systems up to 16 bar
Excellent chemical and corrosion resistance
Very low frictional head losses
High fluid carrying capacity
Valves are serviceable in field
Made o high quality engineering materials
Suitable for pipes made as per IS : 4985 for agriculture
Applications
Micro Irrigation System and Lift Irrigation Systems for Agriculture
Specifications
Sizes : 32mm to 140mm
Available In single Flange with Female Thread For Join QAC HDPE pipe.
They are manufactured from superior durable engineering plastics which are resistant to chemicals and commonly used fertilizers in agriculture. These are easy to clean and can be opened easily without any tools. For cleaning just open the dripper and hold the labyrinth in jet of water. It has a unique clog resistance design which gives a turbulent flow. It has a built in screen on dripper inlet to prevent entering of suspended particles.
APPLICATIONS
Recommended for wide spaced crops like orchards, fruit crops, coconut, oil palm etc in plain terrain.
SPECIFICATIONS
Available in 2 lph, 4 lph, 8 lph and 16 lph flow rates.
Nominal operating pressure – 1 bar.
They are manufactured from superior durable engineering plastics which are resistant to chemicals and commonly used fertilizers in agriculture. These are easy to clean and can be opened easily without any tools. For cleaning just open the dripper and hold the labyrinth in jet of water. It has a unique clog resistance design which gives a turbulent flow. It has a built in screen on dripper inlet to prevent entering of suspended particles.
APPLICATIONS
Recommended for wide spaced crops like orchards, fruit crops, coconut, oil palm etc in plain terrain.
SPECIFICATIONS
Available in 2 lph, 4 lph, 8 lph and 16 lph flow rates.
Nominal operating pressure – 1 bar.
We offer a wide range of Plain Lateral for irrigation under the brand name of “BHUVA”. Dimension’s and weight of the PE pipes are as per IS:12786-1989.
These are available in 12mm, 16mm, 20mm OD for both the Class I & II.
Applications
It is used in Drip Irrigation as well as in Mini Sprinkler Irrigation Systems.
We offer a wide range of Plain Lateral for irrigation under the brand name of “BHUVA”. Dimension’s and weight of the PE pipes are as per IS:12786-1989.
These are available in 12mm, 16mm, 20mm OD for both the Class I & II.
Applications
It is used in Drip Irrigation as well as in Mini Sprinkler Irrigation Systems.
It is made of engineering plastic for durability and is easy to install and dismantle. It can operate at low pressure and has a long life span. Uniform water application maintains optimum soil air and moisture ratio. Fine droplets and shorter irrigation intervals creates micro climatic conditions which are beneficial for crop. Low application rate makes it environment friendly, avoids leaching of soil & fertilizers in ground water, no soil erosion. APPLICATIONS Versatile, can be used for variety of crops like Potato, Onion, Garlic, Ginger, Cabbage, Cauliflower, Strawberry, Groundnut, Mustard, Pulses, Cereals, oil seeds Tea & Nursery. 2-3 crops can be taken in a year. SPECIFICATIONS 1⁄2” male threaded inlet Distance between sprinklers : 10-12 mtr Color coded nozzles for easy identification of size Application rate – 4-5 mm/ hour Part and full circles models
It is made of engineering plastic for durability and is easy to install and dismantle. It can operate at low pressure and has a long life span. Uniform water application maintains optimum soil air and moisture ratio. Fine droplets and shorter irrigation intervals creates micro climatic conditions which are beneficial for crop. Low application rate makes it environment friendly, avoids leaching of soil & fertilizers in ground water, no soil erosion. APPLICATIONS Versatile, can be used for variety of crops like Potato, Onion, Garlic, Ginger, Cabbage, Cauliflower, Strawberry, Groundnut, Mustard, Pulses, Cereals, oil seeds Tea & Nursery. 2-3 crops can be taken in a year. SPECIFICATIONS 1⁄2” male threaded inlet Distance between sprinklers : 10-12 mtr Color coded nozzles for easy identification of size Application rate – 4-5 mm/ hour Part and full circles models
Body of hydro cyclone filter is available in both Mild steel and HDPE material. It has low maintenance and it is pre treated with epoxy powder coating for high durability. We provide a longer cone for more cyclonic action and hence better filtration efficiency.
APPLICATIONS
It is primarily used to separate sand and silt particles size effectively. It is recommended for places where the high amount of sand in the water source.
Body of hydro cyclone filter is available in both Mild steel and HDPE material. It has low maintenance and it is pre treated with epoxy powder coating for high durability. We provide a longer cone for more cyclonic action and hence better filtration efficiency.
APPLICATIONS
It is primarily used to separate sand and silt particles size effectively. It is recommended for places where the high amount of sand in the water source.
It is made according to IS: 14151(part 2) in 63mm, 75mm, 90mm, 110mm sizes. It is made of 100% virgin materials with homogenous fusion welded joints. Moulded fittings are manufactured with cutting edge technology. APPLICATIONS All close spacing crops. Spices Vegetables Cereals Pulses Oil Seeds etc Also available in Engineering Plastic. SPECIFICATIONS HDPE Pipes & Fittings Sizes : 63mm, 75mm, 90mm and 110mm Recommended Pipe Spacing : 12 mtr Recommended Sprinkler Spacing : 12 mtr Coverage Diameter : 11 to 13 mtr Operating Pressure Range : 2 to 4 kg/cm2
It is made according to IS: 14151(part 2) in 63mm, 75mm, 90mm, 110mm sizes. It is made of 100% virgin materials with homogenous fusion welded joints. Moulded fittings are manufactured with cutting edge technology. APPLICATIONS All close spacing crops. Spices Vegetables Cereals Pulses Oil Seeds etc Also available in Engineering Plastic. SPECIFICATIONS HDPE Pipes & Fittings Sizes : 63mm, 75mm, 90mm and 110mm Recommended Pipe Spacing : 12 mtr Recommended Sprinkler Spacing : 12 mtr Coverage Diameter : 11 to 13 mtr Operating Pressure Range : 2 to 4 kg/cm2
Manufactured in 63mm, 75mm, 90mm and 110mm, sizes. Made of 100% virgin materials. Homogeneous fusion welded joints. Moulded fittings manufactured with cutting edge technology APPLICATIONS Used for Assemble Sprinkler Irrigation Product. SPECIFICATIONS Fittings Sizes : 63mm, 75mm, 90mm and 110mm Operating Pressure Range : 2 to 4 kg/cm2
Manufactured in 63mm, 75mm, 90mm and 110mm, sizes. Made of 100% virgin materials. Homogeneous fusion welded joints. Moulded fittings manufactured with cutting edge technology APPLICATIONS Used for Assemble Sprinkler Irrigation Product. SPECIFICATIONS Fittings Sizes : 63mm, 75mm, 90mm and 110mm Operating Pressure Range : 2 to 4 kg/cm2
“BHUVA” HDPE pipes are suitable for underground & overgrown installations and are available in 20mm to 110mm sizes. “BHUVA” HDPE pipes are also available in coils of 50, 100, 150, & up to 300 Mt. in length. The pipes to be used in the system are made up from 100% vergin High Density PolyEthylene Granuals. It also compare or passes the IS standard mark as per IS 4984. This pipe is light in weight, flexible & highly durable. SPECIFICATIONS 20mm to 110mm in 2.5 kg/cm2 to 20kg/cm2
“BHUVA” HDPE pipes are suitable for underground & overgrown installations and are available in 20mm to 110mm sizes. “BHUVA” HDPE pipes are also available in coils of 50, 100, 150, & up to 300 Mt. in length. The pipes to be used in the system are made up from 100% vergin High Density PolyEthylene Granuals. It also compare or passes the IS standard mark as per IS 4984. This pipe is light in weight, flexible & highly durable. SPECIFICATIONS 20mm to 110mm in 2.5 kg/cm2 to 20kg/cm2
We provide high quality disc filters under the brand name “BHUVA”, such that it is easy to install and has low maintenance. Body of filter is made of reinforced polypropylene for maximum durability. It supports wide rang of flow rate and comes with three way valve assembly for easy monitoring of inlet and outlet pressure. As the disc filter mesh is made of plastic it is non-corrosive and filter will have low pressure drop.
APPLICATIONS
Effective in filtering source water when it has organic as well as inorganic contaminants.
We provide high quality disc filters under the brand name “BHUVA”, such that it is easy to install and has low maintenance. Body of filter is made of reinforced polypropylene for maximum durability. It supports wide rang of flow rate and comes with three way valve assembly for easy monitoring of inlet and outlet pressure. As the disc filter mesh is made of plastic it is non-corrosive and filter will have low pressure drop.
APPLICATIONS
Effective in filtering source water when it has organic as well as inorganic contaminants.
Number Of FlowerAir Release Cum Vacuum Relief Valve
SizeAvailable In 3/4
Working Pressure0.3 To 10 Bar
SpecialitiesDurable, Weather Resistant
It is made of non-corrosive reinforced Polyamide which is durable , weather resistant and long lasting. It is acts as air release cum vacuum relief valve. It provides drip tight sealing at low pressure and is easy to install. Continuous acting air release valves are also available for high pressure application.
APPLICATIONS
It provides protections from busting of pipelines due to water surges and water hammering.
Breaking vacuum in pipeline .
Releasing free air in pipe to allow free flow of water without air resistance.
SPECIFICATIONS
Available in 3/4”, 1″ & 2”
Male Thread connection
Working Pressure : 0.3 to 10 bar.
It is made of non-corrosive reinforced Polyamide which is durable , weather resistant and long lasting. It is acts as air release cum vacuum relief valve. It provides drip tight sealing at low pressure and is easy to install. Continuous acting air release valves are also available for high pressure application.
APPLICATIONS
It provides protections from busting of pipelines due to water surges and water hammering.
Breaking vacuum in pipeline .
Releasing free air in pipe to allow free flow of water without air resistance.
SPECIFICATIONS
Available in 3/4”, 1″ & 2”
Male Thread connection
Working Pressure : 0.3 to 10 bar.
Material : Non-corrosive Reinforced Polyamide
Number Of Flower : Air Release Cum Vacuum Relief Valve
Secondary Business TypeManufacturer / Exporters / Wholesale Suppliers
Year of Establishment2015
No. of Employees21 - 50
Annual TurnoverRs. 5 to 25 Crore Approx.
Ownership TypeCorporation/Limited Liability Company
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
About Us. Bhuva Polyplast Pvt. Ltd. is an ISO : 9001 certified company engaged in the field of manufacturing and marketing of Polyethylene(PE) Pipes , Drip Irrigation, Sprinkler Irrigation, Mini Sprinkler Irrigation System & fittings brand name BHUVA. These are made by using best quality material and hightech machinary so our product quality, reliability and durability. Due to this our products are getting high ability to withstand all weather conditions. MISSION To provide world class irrigation technologies so that we can make our world more green. VISION To be the most reliable, respectable and innovative irrigation system provider in the world.
Reviews & Ratings
Write a Review
Post Free Ad