Pressing Machine Dealers in Vavdi, Rajkot (83 products available)

• Type: Power Press, Power Press Machine
• Condition: New
• Automatic Grade: Manual
• Power Source: Mechanical
• Brand Name: FMT
• Capacity: 5 tons to 200 tons.
• Size (Length x Width): 381 x 254 mm
• Thickness: 100 mm

FMT Power Press is the leading supplier of the H type Power Press Machine. ‘H’ type power press is Mechanical Power Press Machine. It produce in the capacity from 5 tons to 200 tons. Features of ‘C’ type power press such as SingleDouble or Un-geared versions, knockout electronics safety manualautomation lubrication systems. This power press machine is highly suitable for making the components for automobile, electrical and various industrial machines.

• Voltage: 240 V
• Application: Industrial
• Automatic Grade: Automatic
• Material: Mild Steel
• Brand Name: Technex
• Country of Origin: Made in India
• Capacity: 100 Ton
• Frequency: 50 Hz

Automatic Power Press Machine that we manufacture and supply features an inclinable type fixed body. It features steel frame construction and manufactured using rolled steel plates with suitable cross ribbings. Our Automatic Power Press Machine presses up to 30 T and it will be supplied with C.I. legs. Proper alignment of the frame is ensured by machining. Automatic Power Press Machine that we make available is featured with clutch, crank shaft, flywheel, gears, etc., for proper functionality. Features: Clutch : The clutch is of Pin/rolling key-type. The clutch is rigid and well supported the clutch given continuous strokes for mass production. Crank Shaft : Crank Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life & accuracy. Flywheel : Properly sized flywheel is made of high grade cast iron. For shoring and releasing adequate energy for the pressing operations, and properly balanced for smooth running. Gears : Gears and of steel cast or fabricated. Gear teeth are generated by precision nobbing machine. Table & Ram : Table and ram made of high grade heavy duty cast iron & properly seasoned. They are perfectly aligned to each other to obtain high accuracy & precision press operation. Lubrication : An efficient shot lubrication system has been provided for lubricating the sliding surfaces and moving parts. The lubricant is applied by hand pump. Inclining : Inclinable type presses proceed with inclining mechanism which can be easily set and locked in position. Mechanism : By Spanners Within minutes. The press is so designed that even in maximum inclined position, it is stable under heavy pressing load.

• Type: Mechanical Press Brakes Machine
• Weight: 100-1000kg, 1000-2000kg
• Automatic Grade: Automatic, Fully Automatic
• Power: 110V, 220V
• Driven Type: Mechanical
• Warranty: 1year

Based in Rajkot, we are a prominent Manufacturer and Supplier of Mechanical Press Brake. The design of Mechanical Press Brake is based on innovative engineering. Further, Mechanical Press Brake is configured with advanced technology which efficiently boosts production capacity of unit. Highlights Robust construction Smooth working Efficient design Longer service life Details Frame : Frame is of robust fabricated steel construction of rigid and interlocked design, It is strain- free and supports the ram and bed against undesired deflection under permissible loding condition. Ram and Bed : Made from steel Plates of suitable thickness, machined for straightness and parallelism of the working surfaces. Ram is guided and supported throughout the stroke by accurately machined guided ways. Drive System : Power is transmitted to the ram through two individual geardrives for uniform load distribution throughout the length. This also reduces the torsional stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon/alloy steel. Ram Adjustment : Motorised ram adjustment through a simple drive mechanism, facilitates quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch. Clutch and Brake : All series of press brakes are provided with high-torque low-inertia friction clutch, synchronized with heavy duty mechanical brakes ensuring immediate braking of ram on releasing the pedal. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal. Features Foot Pedal and Die Block Lifting Link. Fly Wheel & Gear Guard. Self Lubrication System. Motor Pully. Stroke counter. Standard �V� Block and Punch. Motor Mounting Bracket. Options Motorised Back Guage. Automatic Lubrication System ee-Belts. Electric Motor & Starter / Control Panal Board. Squaring Guage System. Various type of Die & Punch. Foundation Bolts. All Dimensions are in mm. Power Supply 400/440 volts, 3 Phase, 50 Cycle. As day to day improvements are contemplated for better performance of the machine. We reserve the rights to alter the specifications without prior notice. All the machines undergo a through check-up by our expert engineers before dispatch to ensure their smooth and trouble free operation.

• Type: Tamarind Cake Pressing Machines
• Certification: CE Certified, IS0 9001 Certified
• Weight: 100-1000kg
• Color: Grey
• Voltage: 220V
• Condition: New
• Rated Power: 1-3kw
• Automatic Grade: Semi Automatic
• Driven Type: Cake Packing Machine
• Warrenty: 1 Year
• Country of Origin: India
• Brand Name: Paqee Packaging
• Material: SS
• MOQ: 1
• Packaging Size: 250 Grm To 1 Kg
• Machine Size: 915 mm x 1830 mm x 1016 mm
• Die Size / Shape: Square, Rectangle & Round (Customized as per Requirement)

• Power Source: Mechanical, Hydraulic
• Categories: Press
• CNC or Not: Normal
• Automation Grade: Semi-Automatic

• DISCRIPTION : GSP1
• GSP 2 : GSP 3
• Base to Guide : 127
• 152 : 165
• Back to Base Centre : 82.5
• 102 : 102
• Hole Through Collar in Base : 35
• 35 : 35
• Diameter of Screw : 44.45
• 44.45 : 50.8
• Ram Hole X Depth : 19 X 38
• 19 X 38 : 25 X 38
• Operate With : Steel Rod Handle
• Steel Rod Handle : Cast Iron Wheel
• Machine Net Weight : 71.0 Kg.
• 97.0 Kg. : 142.5 Kg.
• Machine Dimension W X D X H : 24 X 32.5 X 69 CM
• 27.5 X 35 X 70 CM : 35 X 37.5 X 80 CM

• Frame:: The frame is made of heavy strength steel fabricated plate with suitable cross ribbing for quality & accuracy with precision performance.
•  :  
• Crank Shaft:: Crank Shaft is made of special alloy steel and fitted in with gun metal bushes for accurate alignment.
•  :  
• Clutch:: The clutch is of rolling key type & it is very rigid & better supported. The clutch gives continuous stroke for mass production.
•  :  
• Brake:: The Brake is powerful and works on top dead centre and compensated by spring.
•  :  
• Fly Wheel:: The Fly Wheel is made of high grade cast iron & it is balanced for storing & releasing adequate energy for the operations.
•  :  
• Gears:: Gears are of cast steel or fabricated. Gear teeth are generated by imported hobbing.
•  :  
• Lubrication:: Lubrication system is sufficient & accurate for lubricating in all bearing surfaces, sliding surfaces and moving parts without wasting of oil.
•  :  
• Table & Ram:: Table & Ram are made of heavy duty high graded cast iron with seasoned. Both are perfectly aligned to each other to obtain quality job.

Our Briquettes Machine 75MM MODEL is the ideal choice of the manufacturers looking for output in the range of 800-1000 kg/hr. and not yet ready for the investment in installation of JUMBO 9075 MODEL. This machine is also supported by Hammer Mill (Powder Making Unit) that breaks raw material in powdery form that is suitable for final process of biomass Briquettes production. Input Bulk Density 140 To 200 Kg/M3. Briquettes have high specific density (1200 Kg/m3) and bulk density (800 Kg/m3) compared to 60 to 180 Kg/m3 of loose biomass.

• Brand Name: Shivam
• Power: 75 HP
• Voltage: 415 V
• Frequency: 50 Hz
• Phase: Three Phase
• Automatic Grade: Automatic
• Production Capacity: 500-1000 kg/hr

• Condition: New
• Automatic Grade: Automatic, Semi-Automatic
• Products Range: 1500×2mm (25m Ton) To 3000×10mm (250m Ton)
• Cutting Load:: Upto 400 ton

Extra Rigid Plate,Interlocked Plate Fully Steel Body Structurel Nc & Cnc- Synchro Machines.Pressing Die Tools Made From En Series.Hydraulic &Electricals Will Be International Makesrnyuken,Polyhydron,Rexroth,Veljan Abb,L&T Etc.

• Type: Power Press Machine
• Weight: 100-1000kg, 1000-2000kg, Etc
• Color: Blue
• Voltage: 220V, Etc
• Condition: New
• Automatic Grade: Automatic
• Power Source: Hydraulic
• Warranty: 1 Year
• Brand Name: MAYUR
• Power: 1-3kw, 3-5kw, Etc
• After-Sales Service Provided: YES

rajesh rhcp c-frame hydraulic power press (10 ton).

Our firm is a prominent company, active in Manufacturing & Supplying a large array of Mini Roll Press in Rajkot, Gujarat, India. This press is produced using optimum quality components and cutting edge technology under the strict guidance of experienced experts. It is highly required for roll pressing work in various industries. We provide this press.

• Size: Customized
• Type: Kitchen Press
• Material: Mild Steel, Stainless Steel
• Application: Kitchen Use
• Certification: ISI Certified, ISO 9001:2008 Certified
• Weight: 100-250 Gm, 250-400 Gm
• Color: Grey, Shiny-silver, Silver
• Condition: New
• Finishing: Coated, Polished
• Packaging Type: Cartons, Corrugated Boxes

• Weight: 100-1000kg
• Color: Black
• Voltage: 220V
• Automatic Grade: Fully Automatic
• Power Source: Hydraulic
• Warranty: 1 Year
• Power: 3-5kw

• Brand Name: MAYANK
• Features: Long operational life, Trouble-free functioning, Rigid structure
• Usage/Application: INDUSTRIAL AND OTHER
• Machine Type: 50 TON C TYPE
• Material: MS

• Usage/Application: Chapati Pressing Machine
• Capacity: 800 - 1000
• Model Number: JK-CPM-1
• Material: Stainless Steel 202
• Weight: 90 Kg
• Brand Name: J K
• Stainless Steel: 202
• Place of Origin: India
• Country of Origin: Made In India

 Cap - 1000 Make : JK Model :JK-CPM-1 Capacity : 800 to 1000 Pcs Per/Hour Motor : 0.5 H.P. , Single Phase Power Consumption  : 1.5 to 2 unit per/hour Roti Size (Inch) & Thickness (mm) : 3 to 9.5 & 1 mm to 6 mm Heater : Ceramic 2000 Watts. 2 Nos.  Body Material : Stainless Steel 202 Weight : 90 KG Size (Inch) : 26 X 18 X 20 

• Capacity (Lenght x Thick): 2000 x 1.20mm
• Stroke of Ram: 75mm

SIDE WALLS (Housings) :Fabricated from mild steel plate. The internal portion of the body is further strengthened to support vertical and horizontal supports.CAMS :Designed from Mild Steel & are connected with the lower beam. UPPER BEAM :Fabricated from heavy steel plate machining its every surface ensuring perfact job as it functions in the slide.KNIFE :Fabricated from mild steel and sharpened up to 20° after machining.

• Country of Origin: India
• Type: C Type Power Press Machine
• Warranty: 1 Year
• Brand Name: Vishwakala
• After-Sales Service Provided: Yes

Frame The Frame Is Fabricated From Solid Steel Plates With Heavy Cross Ribbings. Chute Clutch Design is Rolling Key Type Clutch & Its is made from O.H.N.S. Steel And Its Other Parts Are Tempered. Gears Gears Are Made From Steel Casting And Helical Teeth Cutting The Hole Of The Gears Is Machined In Degree So That It Does Not Loose While In Working Press. Lubrication The Oil Cups Are Fitted On All The Moving Parts To Provide Them A Nice Lubrication. Cran Kshaft The Crank Shaft Is Made Of A Very Special Alloy Steel And It Moves Very Easily On Gunmetal Bush. Adjustable The Adjustable Stroke Features Enables The Press To Meet. Stroke All Kinds Of Operations ; Even With A Small And Short Stoke. Brake The Brake Is Compensated By Spring Along with Out Centred Plate System And Hence, It Works According To Timing Adjustment. This Enables To Lengthen The Life Of The Brake. Ram Slide Made Of Seasoning High Grade Casting And Bearing Surfaces Are Hand Scraped. Temper Parts Are Tempered Where Tempering Is Felt Necessary. Standard Accessories Die Clamp, Motor Pully, Stud Driver, Motor Stand. Extra Fitting Oil Pump, Knock Out System, Tie Rod Etc.

Buyers can contact us to buy Manual Press Brake Machine. The Hand Operated Press Brake, offered by us, is fabricated from quality-tested parts and components following the industry defined norms. The Manual Press Brake Machines that we offer are known for excellent performance apart from flawless construction. Manual Press Brake Machines can be acquired at reasonable prices from us. We are a well-reckoned Manual Press Brake Machine Manufacturer and Supplier in Gujarat, India.

• Capacity: 6 kg/Hour
• Machine Type: Domestic Expeller
• Packaging: Box Packing
• Machine Body Material: 304 Stainless Steel
• Operation Type: Automatic
• Size: 350 x 160 x 360 mm

Applications: Peanuts Sesame Walnut Sunflower Seeds Linen Aberdeen

• Certification: CE Certified, ISO 9001:2008
• Weight: 100-1000kg, 1000-2000kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Power: 1-3kw, 3-5kw, 5-7kw
• Warranty: 5 Years
• Country of Origin: India

• Machine Type: Mechanical Pneumatic
• Automatic Grade: Semi-Automatic
• Material: Mild Steel
• Weight: 1000 Kg
• Brand Name: Maruti
• Model Name/Number: 1620 F
• Capacity: 160 Ton
• Frequency: 50 Hz
• Power Source: Electric
• Phase: 1 Phase
• Bending Length: 2000 x10 mm
• Motor Power: 15 HP

• Country of Origin: Made in India
• Voltage: 240 V
• Capacity: 1 Ton/Day
• Automation Grade: Automatic
• Material: Gold and silver
• Frequency: 50 Hz
• Surface Finish: Paint Coated

We are a trusted supplier of Press Brake Machine, providing the lucrative deals to the widespread customers at easy terms. To handle both automated inbound and outbound orders, we have exceptional warehousing solutions. We keep the wide array of products sorted in the warehouse to make sure that the delivery commences systematically.   Product Details : Machine Type - Lathe Machine,Milling Machine,Drilling Machine,Boring Machine Operation Mode - Semi Automatic Service Location - Any Where in India   Approx Price : Rs 3,000 / Piece