Trimming Press
We are listed at the apex in the list of the most preeminent Hydraulic Trimming Press Manufacturers and Suppliers in India. Various national as well as international clients are placing bulk orders for the Trimming Press due to the unmatched quality and inexplicable performance in respective application. The Trimming Press Machine is designed as per the international standards and the notable features i.e. high performance, easy operation and low maintenance cost. Additionally, the Hydraulic Trimming Press is also available as per the specifications provided by the clients. As Per Customer Requirement
...moreSteel rolling machine
MAX ROLLING THICK¬ NESS (MM):12,PRE¬ CURVED PLATE THICKNESS (MM):10,THE UPPER ROLLER DIAMETER (MM) :260,SIDE OF THE DIAMETER (MM):200 ,MAIN MOTOR POWER (KW) :18.5, DIMENSION LXWXH (MM):5600x2000x2070,6300x2000x1200,7600x2000x1800.
...moreSingle Point Power Press
Single point Suspension Non-Inclinable Double Action Power Press, having Steel Plate Fabricated Construction Duly Stress Relieved with 8 point Gibbing of Slide, Fitted with Pneumatically Operated Combined Single Disc. Friction Clutch and Brake.
...moresingle action power press
Single Crank Double Point Pneumatic Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.
...moreSheet Shearing Machine
710,000 Per Piece
1 Piece (MOQ)
Automatic Grade : Automatic
Voltage : 5 HP
Brand Name : Rajshakti
Application : Cut For Metal Sheet
Diameter : Length - 4500 mm Width -2250 mm Height - 2400 mm
Warranty : 1 year
Country of Origin : Made in India
...moreSheet Rolling Machine
LOADED WITH MINIMUM DIAMETER (MM):700 , 750. THE UPPER ROLLER DIAMETER (MM) :260, 300, 410. SIDE OF THE DIAMETER (MM) :200, 220, 280. DIMENSION LXWXH (MM):5600x2000x2070, 6300x2000x1200, 7600x2000x1800, 5800x2000x1800.
...moresheet metal bending machine
max rolling thick¬ ness (mm):12 ,max. crim width (mm):200, plate yield limit (mpa):245, pre¬ curved plate thickness (mm):10, loaded with minimum diameter (mm):700 .
...moreShearing Machine Blades
HIWIN Ball screws & Polished rod with 0.05 mm accuracy, Powered back gauge, Germany EMB Tubing connector, Cutting Line Illumination and wire for shadow line cutting, Top blade with two cutting edges and bottom blade with four cutting edges.(6CrW2Si). Front finger Protection(Safety Light curtain).
...moreRoller Press
PRE¬ CURVED PLATE THICKNESS (MM):10, LOADED WITH MINIMUM DIAMETER (MM):70,THE UPPER ROLLER DIAMETER (MM):260, ROLL DIAMETER (MM):260 , MAIN MOTOR POWER (KW):18.5.
...moreRoll Bending Machine
Its upper roller can life and two bottom rollers can move horizontally separately or synchronously. Every bottom roller performs function of bottom roller and sider roller in turn, become two types non-symmetrical three roller rolling plate machine, which can finish pre-bend and roll of thin and thick plate at the same time. It is convenient to roll taper work piece. Note: The Machine that more than25x2500 adopts discharge by hydraulic connection plate.
...morepress break machine
HIWIN Ball screws & Polished rod with 0.05 mm accuracy, Germany EMB Tubing connector, Telemecanique Schneider Electrics , Top blade with two cutting edges and bottom blade with four cutting edges.(6CrW2Si), Safety relay with Monitor the pedal switch & safety protection.
...morePrecision Shaft
Pneumatic Dry Clutch,PLC Control With Fault Finding System,Motorized Slide Adj.,Anti-repeat Safety Device, Cross Shaft Precision Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed. High Precision Transmission Gear: The high accurately machined gear system provides smooth and silent operation.
...morepower press cutting machine
Angle shearing station is equipped with manual holding system, Plate shearing station is equipped with manual holding system, Punching & Shearing is not allowed to work simultaneously, Plate shearing station is equipped with hydraulic system, Punching & Shearing station both work simultaneously, is equipped with thermal dissipation system, suitable for long time working with high affiance.
...morePower Operated Hydraulic Press
Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed. The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).
...morePneumatic Press Machine
C Frame Pneumatic Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed. Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.
...morePneumatic Power Press Machine
Mechanical C Frame Power Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed. Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.
...morePneumatic Clutch Power Press
PLC Control With Fault Finding System, Die Height Indicator, Electric Control Panel and Production Counter, SMCFESTO Make FRL & Pneumatic Fitting, ROSS Toyoki Japan Make Dual Solenoid Valve, Cross Shaft Precision Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.
...morePlate Straightening Machine
100,000 Per Units
1 Units (MOQ)
Application : Plate Straightening
Automatic Grade : Semi-Automatic , Fully Automatic
Country of Origin : Made in India
...moreplate roller
MODEL:RP-PR4-12×2000, MAX ROLLING THICK¬ NESS (MM):12, MAX. CRIM WIDTH (MM):200, PLATE YIELD LIMIT (MPA):245, ROLL SPEED (MMIN) :5.45, PRE¬ CURVED PLATE THICKNESS (MM):10, LOADED WITH MINIMUM DIAMETER (MM) :700.
...morePillar Type Power Press
We are renowned as one of the most dependable Pillar Type Power Press Machine Manufacturers and Suppliers in India. The Pillar Type Power Press offered by us has a capacity of 10 Ton to 250 Ton. Additionally, the Pillar Type Power Press is also loaded with all the advanced features to meet the specific requirements of the clients. Frame The Frame is made of Steel Construction and their heavy cross section and Rigid Design Assure Minimum Deflection and Accurate Alignment Cast Iron Legs will be Supplied up to 30 Ton Presses. CrankshaftCrank Shaft Materials are Made of Special Alloy Steel to Withstand The Effective Load Fitted in Busher with High Accuracy.GearsThe Gears are Made of Cast Steel or Fabricated and it Teeth are Generated by Hobbing.ClutchThe Clutch is Provided of Pin / Rolling Key Type Also it is Rigid and Well Supported for the Mass Production Clutch Can Gives Continuous Stroke.FlywheelThe Flywheel is made of High Grade Cast Iron and is balanced for Stalong and Releasing Adequate Energy for the Pressing Operations.LubricantAn Accurate Lubrication System Has Been Proved for Lubrications The Sliding Surfaces and Moving Parts.Table & RamTable and Are Made of High Grade Heavy Duty Cast Iron & Properly Seasoned. They Are Perfectly Aligned to Each Other to Obtain High Accuracy & Precision Press Operation.Capacity10 Ton to 250 Click here for Technical Specifications
...morepillar press
Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed. Table and Slide are made of high grade heavy duty cast iron steel fabricated and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.
...morePillar Hydraulic Press
Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.
...moreMs and SS SHEET CUTTING MACHINE
625,000 Per Piece
1 Piece (MOQ)
Material : MS and SS
Phase : 7.5 HP
Max Cutting Thickness : 10 MM
Country of Origin : Made in India
...moreMechanical Press Brakes
Operating with Delem Cybelec CNC System, Back gauge on ball screws, stroke 500mm, precision with 0.01mm accuracy,Anti-crowing system CNC control, Electro-hydraulic ram-table parallelism and depth stop setting, Front support arms,Standard tooling along with the machine.
...moreHydraulic Press Working
Be first to Rate
Rate This